Wheel Hubs Golf MK4 Bora Audi A3 TT TTRS RS3 Audi TT Conversion to 5x112 V6 R32 PCD Adapter Front
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ VW Golf 4 Bora / Audi A3 / Audi TT quattro
€150.42*
- 30 days money back guarantee
- shipping within 24h
- 15 years expert knowledge
- 2 years warranty
Wheel hubs for conversion to 5x112 PCD , front axle on Golf MK4 series , inclusive ABS sensor ring.
In all Quattro or 4WD vehicles such as R32 S3, etc., this wheel hub also fits the rear axle.
Who wants to at last convert his Golf MK4, Bora, Audi A3 TT TTRS RS3 , Audi TT, etc, to 5x112mm PCD, is here just right!
This is the perfect solution as the original hub can not be re-drilled because the diameter is too small. Thus, you finally can drive with rims having 5x112 PCD, without adapter plates are needed.
Advantages:
- rims with 5x112 without spacer plates
- 100% fitting
- completely galvanized, therefore best corrosion protection
- the 5x112mm hubs are equipped with M14x1,5 thread. Thus, the original wheel bolts for the VW and Audi rims can be used
- is not authorized under the STVO (German Road Licensing Law) However, it is possible to register your purchase even for series vehicles
- ABS mounting rings are supplied
Delivery:
- 2x wheel hubs with 5 x 112 PCD and M14x1,5 thread, with ABS sensor ring, for front axle of Golf MK4 Bora Audi A3 TT TTRS RS3 Audi TT
- material certificate
Technical data:
Login
28 October 2024 14:04
137ratrace137
very cool thank you
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems