VW Golf Scirocco Corrado G60 VR6 16V Brake Caliper Adapter S3 R32 280x22 Brake Disc Polo 9N Wheel Hub Rear Axle
- ✓ 280x22 1J0615301E Golf 4 brake disc
- ✓ 1-piston 8N0615423C / 8N0615424C Golf 4 V6 R32 Audi S3 brake caliper
- ✓ rear axle
€176.62*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter with special wheel hubs to drive the rear brake calipers from the Golf Mk4 V6 R32 Audi S3 8L, combined with the front 280mm brake discs from the VW Golf Mk4 on the rear axle.
Adapters are suitable for the following VW and Seat models:
- Golf MK1
- Golf MK2 MK3 + GTI+ VR6
- Corrado
- Jetta
- Passat 35i
- Scirrocco
- Vento
- Seat Cordoba
- Seat Ibiza
- Seat Toledo
Advantages:
- top deceleration, without comparison with conventional brake discs, rear.
- only manufacturer components installed
- better performance
- supplied material certificate
- inexpensive procurement of spare parts
- thanks to the material certificate supplied with the order, it is possible to approve your purchase even for series vehicles
technology:
Using the original Polo 9N wheel hubs, the 280 mm brake discs are centered and screwed. The original wheel bearings from the Polo 9N can still be used.
Required components:
- brake caliper: left VW reference 8N0615423C, roight VW Teilenummer 8N0615424C
- brake caliper mounting bracket VW reference 8N0 615 425 B or painted in blue from the R32: 1J0 615 425 F.
- stub axle from Polo 6N GTI (also available in our shop, item number APA213)
- wheel hub from Polo 9N reference: 6Q0598611
- brake disc: front disc from Golf 4 280x22 mm reference: 1J0 615 301 E
Delivery:
- 2x brake caliper adapters
- high-strength mounting screws
- material certificate
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ 280x22
- ✓ 65mm centering
- ✓ 37mm height
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
- ✓ 281x22
- ✓ 65mm centering
- ✓ 36mm height
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ Brake force regulator Infinitely variable
- ✓ Perfectly adjustable braking effect
- ✓ suitable for all vehicles
- ✓ For G60 16V brake
- ✓ Golf 1 Golf 2 Golf 3
- ✓ original equipment manufacturer quality
- ✓ 280x22
- ✓ 65mm centering
- ✓ 36.7mm height
- ✓ 281x22
- ✓ 65mm centering
- ✓ 36mm height
- ✓ 281x22
- ✓ 65mm centering
- ✓ 36mm height
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track