Golf VR6 16V Brake Adapter Brake Caliper Adapter S3 TT 1.8 TPolo 6r WRC 312x25
- ✓ 312x25 1J0615301AA 1J0615302A S3 / R32 brake disc
- ✓ 1-piston 1J0615123E / 1J0615124E S3 / R32 brake caliper
- ✓ front axle
£23.35*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for Golf MK3 VR6 series with VR6 axle to convert to the large Golf MK4 V6 Jubi brake system.
(brake disc 312x25 , brake caliper Golf 4 V6)
Suitable for the following vehicles:
- Golf VR6
- Corrado VR6
- Passat 35i VR6
- Polo 6r WRC
Suitable for other vehicles, if the VR6 Plus axle is installed.
The 312x25 brake system was installed in the following vehicles:
- Golf 4 25 Jahre Jubi GTI/ V5
- Golf 4 V6
- Audi S3 8L
- Audi TT 225 PS
Advantages:
- easy and quick assembly
- significantly better braking than the standard braking system
- can always be restored to the original state without any problems
- for the rear axle, we also have adapters in our shop to drive with the rear S3 calipers , combined with the 280 brake disc
Required components:
- brake caliper front original S3 /R32 caliper reference: left 1J0615123E , right 1J0615124E
- brake caliper support / bracket S3 /R32 reference : left 1J0615125B , right 1J0615126
- brake pads front original S3 /R32 reference: 8D0698151D
- brake discs front original 312x25 S3 / R32 reference : left 1J0615301AA , right 1J0615302A
The adapter plates have a thickness of 6mm and the hole distance is 90mm from center to center hole.
Delivery:
- 2x brake adapters for Golf VR6 16V to S3 TT 1,8T brake
- material certificate
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
10 March 2017 12:56
the_godfather_of_nordriderz
Alles bestens, . Gerne wieder
3 October 2022 15:00
chipsforbrian
all good thanks
31 October 2020 17:46
Christian W
Sehr gut verarbeitet super passgenau und ein unschlagbarer Preis .habe epytec schon öfter im Bekanntenkreis empfohlen da Preis Leistung immer stimmt. Bremssättel samt Träger passen auch vom Audi a6 2.5tdi mit der 312er Bremse
24 November 2022 00:58
lenny092011
Top Neuware - sehr schneller Versand - erstklassiger Verkäufer!!!
20 April 2022 12:53
Johannes H
Hat perfekt gepasst und der Preis passt auch, mehr kann man dazu nicht sagen
25 April 2017 12:50
hubifriend
alles bestens!
27 May 2020 10:18
daniel95364
5 Sterne Transaktion.
29 July 2020 11:58
Stéphane B
Belle pièce
10 August 2016 09:52
korkmazpower
Super schnell und unkompliziert, immer wieder gern.
10 August 2016 10:24
elvis20082012
Alles bestens, sehr gerne wieder!!!
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H1|174PS(128KW) |
| 2.9 VR6 Syncro | 1H1|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 35I|174PS(128KW) |
| 2.9 VR6 Syncro | 3A5|184PS(135KW) |
| 2.8 VR6 | 3A5|174PS(128KW) |
| 2.9 VR6 Syncro | 35I|184PS(135KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 | 53I|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 Syncro | 7M9|174PS(128KW) |
| 2.8 VR6 Syncro | 7M8|174PS(128KW) |
| 2.8 VR6 | 7M6|174PS(128KW) |
| 2.8 VR6 Syncro | 7M6|174PS(128KW) |
| 2.8 VR6 | 7M8|174PS(128KW) |
| 2.8 VR6 | 7M9|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 35I|174PS(128KW) |
| 2.8 VR6 | 3A2|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 Syncro | 1H5|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H2|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H1|174PS(128KW) |
| 2.9 VR6 Syncro | 1H1|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 35I|174PS(128KW) |
| 2.9 VR6 Syncro | 3A5|184PS(135KW) |
| 2.8 VR6 | 3A5|174PS(128KW) |
| 2.9 VR6 Syncro | 35I|184PS(135KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 | 53I|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 Syncro | 7M9|174PS(128KW) |
| 2.8 VR6 Syncro | 7M8|174PS(128KW) |
| 2.8 VR6 | 7M6|174PS(128KW) |
| 2.8 VR6 Syncro | 7M6|174PS(128KW) |
| 2.8 VR6 | 7M8|174PS(128KW) |
| 2.8 VR6 | 7M9|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 35I|174PS(128KW) |
| 2.8 VR6 | 3A2|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 Syncro | 1H5|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H2|174PS(128KW) |
- ✓ Brake caliper left for VW Golf 2 3 Corrado G60 conversion Lucas / ATE / Girling 54
- ✓ front axle: OE quality
- ✓ Brake caliper right for VW Golf Corrado G60 conversion Lucas / ATE /Girling 54
- ✓ front axle: OE quality
- ✓ 1J0615125A / 8L0615125 / 8N0615125
- ✓ Audi A3 / Audi A6 / Golf 4 / Passat B5
- ✓ Front axle
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 312x25
- ✓ 65mm centering
- ✓ 34.4mm height
- ✓ 312x25
- ✓ 65mm centering
- ✓ 35mm height
- ✓ 5x100 bolt circle
- ✓ Plug & Play
- ✓ VW Golf 2-3 / Passat / Corrado
- ✓ 334x32
- ✓ 65mm centering
- ✓ 35mm height
- ✓ 334x32
- ✓ 65mm centering
- ✓ 35mm height
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
