VW Golf MK3 R32 Corrado Passat Syncro Rear Brake Caliper Adapter S3 V6 280mm Brake Disc
- ✓ 288x221H0615301 Passat 35i VR6 VW brake disc
- ✓ 1-piston 8N0615423C / 8N0615424C VW Golf R32 V6 / S3 brake caliper
- ✓ rear axle
€151.77*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, rear axle, for Golf MK3, Corrado, Syncro to install the brake calipers of Golf MK4 V6/R32 , Audi S3 8L, YoC 99, combined with the front brake discs 280mm VR6 .
Suitable for the following models of VW and Seat, with Syncro axles:
- Golf MK3 Syncro
- Corrado Syncro
- Passat 35i Syncro
Advantages of this brake system:
- top deceleration, without comparison with conventional brake discs
- thanks to the internally vented discs, a better fading
- better performance
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
For the front axle, we have in our shop brake caliper adapters for conversion to Porsche brake system, combined with R32 brake discs . Visit our shop.
Required components:
- brake caliper:VW Golf R32 V6 oder S3 VW , reference left 8N0615423C , right 8N0615424C
- brake caliper mounting bracket: reference 8N0615425B
- brake disc: Passat 35i VR6 , reference 1H0615301, 280 mm
Due to high customer demand, our adapters are supplied in the color black, which is applied with the GNC-OX nitrating process. This process guarantees the best mechanical-dynamic properties against wearing out.
Delivery:
- 2x brake caliper adapters
- complete screw kit
- material certificate
- stress analysis
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
5 September 2018 15:06
Christoph H
Alles super gelaufen!
3 April 2020 08:02
Marcel R
Super Lieferung sehr Passgenau
20 July 2022 18:23
Giuseppe B
PASSFORM 1A - Blitzversand - Super Kommunikation Danke vielmals
30 March 2019 09:27
Marcel K
Alles super
30 January 2021 12:46
Andreas D
Weil ich zu wirklich zufrieden bin mit der Qualität. Das Produkt ist sauber verarbeitet. Ich würde Ihr Produkt jeden empfehlen der mich fragen würde. Die Beschreibungen könnten ein wenig überarbeitet werden. Manchmal ist es nicht gleich ersichtlich für um welches Fahrzeug es sich handelt. Durch Empfehlung von anderen habe ich euch gewählt. Ja Ich bin immer skeptisch. Nach dem Einbau war das Ergebnis erstaunlich.
12 June 2020 07:28
Vitali S
Top
23 March 2023 19:21
Christian M
Verarbeitung mehr als perfekt
16 January 2021 13:05
Andreas D
Ich habe euch gewählt weil : Ihr mit einer Prüf Organisation zusammen arbeitet. Und durch Empfehlungen anderer Kollegen. Alles andere wie beim ersten Artikel.
19 February 2021 10:58
Patrick L
Alles top
31 January 2019 05:17
Lukas K
Alles passt perfekt. Immer wieder gerne 👍
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: