VW Golf MK3 VR6 Corrado Passat 35i Adapter Porsche Brake Caliper Adapter
- ✓ 323x28 1ML615301 Seat Leon Cupra R brake discs
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ front axle
£117.10*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for original Seat Leon Cupra R 323th brake discs, combined with 4 piston Porsche Brembo calipers.
Suitable for all models with VR6 plus axles:
- Golf 3 VR6
- Corrado VR6
- Passat 35i VR6
Required components:
- brake caliper: Porsche Cayenne (rear axle) reference 955.352.421 + 955.352.422(written on the calipers, back number distinguishes right and left caliper) (only 100% suitable with the specified Porsche caliper )Brembo reference : left 20.7673.03 + right 20.7673.04
- original brake pads from the 955.352.421 + 955.352.422 brake caliper are used
- brake disc: Seat Leon Cupra R 323x28 reference : 1ML 615 301
Advantages of this brake system:
- top deceleration, without comparison with conventional brake discs better engine performance
- suitable for 17 inch rims
- components come from the production series of VW
- registration is possible if correct assembly
- including set of mounting screws
Delivery:
- 2x brake caliper adapters, galvanized (see picture)
- set of high-strength mounting screws
- material certificate
- stress analysis
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
23 August 2020 18:11
Christoph G
Super Adapter, Passgenauigkeit 1a und die Verarbeitung ist auch top. Wenn es um das Thema Adapter geht kann ich euch nur weiter empfehlen.
14 February 2022 02:38
jorgescare-0
Todo bien gracias, muy rápido el envío
8 November 2023 23:33
santa_kevi
increible tanto el trato del vendedor como el articulo
19 April 2017 10:45
caddycrew2012
great product , excellent and trouble free purchase, will be buying more!
28 June 2017 21:50
schanipp84
Alles super👍🏼
18 February 2017 13:57
tuninggame
Alles perfect,Top!Danke Danke!
6 June 2021 10:39
dietrichm95
Super Sache schneller Versand. Alle Komponenten passen ineinnander. Schön das es epytec gibt. Ich bin voll zufrieden.
12 July 2017 08:25
schanipp84
Alles super👍🏼
10 January 2019 19:18
frizifisch
super wahre schneller versand danke
18 September 2017 18:49
beautycolt
Einwandfrei
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
| Motor | Motorcode |
|---|---|
| 2.9 VR6 | 53I|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 7M6|174PS(128KW) |
| 2.8 VR6 | 7M9|174PS(128KW) |
| 2.8 VR6 Syncro | 7M6|174PS(128KW) |
| 2.8 VR6 Syncro | 7M8|174PS(128KW) |
| 2.8 VR6 Syncro | 7M9|174PS(128KW) |
| 2.8 VR6 | 7M8|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 Syncro | 35I|184PS(135KW) |
| 2.9 VR6 Syncro | 3A5|184PS(135KW) |
| 2.8 VR6 | 35I|174PS(128KW) |
| 2.8 VR6 | 3A5|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H2|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 Syncro | 1H5|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 Syncro | 1H1|190PS(140KW) |
| 2.8 VR6 | 1H1|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 35I|174PS(128KW) |
| 2.8 VR6 | 3A2|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 | 53I|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 7M6|174PS(128KW) |
| 2.8 VR6 | 7M9|174PS(128KW) |
| 2.8 VR6 Syncro | 7M6|174PS(128KW) |
| 2.8 VR6 Syncro | 7M8|174PS(128KW) |
| 2.8 VR6 Syncro | 7M9|174PS(128KW) |
| 2.8 VR6 | 7M8|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 Syncro | 35I|184PS(135KW) |
| 2.9 VR6 Syncro | 3A5|184PS(135KW) |
| 2.8 VR6 | 35I|174PS(128KW) |
| 2.8 VR6 | 3A5|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H2|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 Syncro | 1H5|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 Syncro | 1H1|190PS(140KW) |
| 2.8 VR6 | 1H1|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 35I|174PS(128KW) |
| 2.8 VR6 | 3A2|174PS(128KW) |
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 288x221H0615301 Passat 35i VR6 VW brake disc
- ✓ 1-piston 8N0615423C / 8N0615424C VW Golf R32 V6 / S3 brake caliper
- ✓ rear axle
- ✓ 280x22 G60 & VR6 brake discs 1H0615301A 535615301
- ✓ 1-piston 8N0615423C 8N0615424C 8N0615425B 1J0615425F
- ✓ Rear axle
Hexagonal nut M08
Thread right
Galvanized
- ✓ 323x28 1ML615301 Seat Leon Cupra R brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ front axle
- ✓ Release lever reinforced
- ✓ G60, VR6, 2L 16V, GTI, TDI, Corrado, Golf 2/ 3, Passat
- ✓ 02A/02J gearbox
- ✓ No more play
- ✓ high-quality aluminium
- ✓ Golf 4 Audi A3 Seat with cable shift
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ for rear axle: Golf 1, Golf 1 Cabrio, 2, 3, GTI, VR6, Caddy 14d, Jetta, Corrado, Passat 35i, Scirrocco, Vento, Polo 6N1, Seat Cordoba, Ibiza, Toledo
- ✓ brake caliper: left VW reference 8N0615423C, right VW reference 8N0615424C
- ✓ brake caliper mounting bracket: VW reference 8N0 615 425 B or lacquered blue from R32, 1J0 615 425 F
- ✓ brake disc: VR6 280x22mm, VW reference 1H0615301A
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 1-piston 8N0615423C / 8N0615424C R32 / S3 brake caliper
- ✓ rear axle
- ✓ VR6 plus axle
- ✓ VW Golf 2, VW Golf 3, Passat, Corrado
- ✓ 02M, 02Q, DQ250 / DSG four-wheel drive transmission
- ✓ VW Golf 2, Golf 3 Passat, Corrado, Jetta, Vento
- ✓ 02M 6-speed transmission Golf 4 R32
- ✓ 1.8 T simple engine and transmission conversion
- ✓ For G60 16V brake
- ✓ Golf 1 Golf 2 Golf 3
- ✓ original equipment manufacturer quality
- ✓ Length: 23cm
- ✓ M12x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 280x22 1J0615301E Golf 4 brake disc
- ✓ 1-piston 8N0615423C / 8N0615424C Golf 4 V6 R32 Audi S3 brake caliper
- ✓ rear axle
- ✓ VR6 16V engine conversions
- ✓ OEM no.: 1H0199262A, 357199402B
- ✓ reinforced Shore 68
- ✓ For Golf 3 Corrado
- ✓ On Golf 6 Accelerator Pedal
- ✓ OE:1K1721503AA
- ✓ Length: 52cm
- ✓ M10x1 outside 45° curved
- ✓ M10x1 inside straight
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside