Steel Braided Brake Line Rear Axle VW Golf MK2 MK3 Jetta Corrado Caddy Brake Conversion
- ✓ Length: 23cm
- ✓ M12x1 curved on the outside
- ✓ M10x1 straight on the inside
€109.56*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Longer steel braided brake line / steel flexible brake hoses, including material certificate for conversion to larger brake system, connection M12x1,0, suitable for e.g. Golf MK2, MK3, Jetta, Corrado, Caddy.
Suitable for the rear axle of the following models:
- Golf MK2, MK3
- Polo 9N
- Jetta
- Scirocco
- and many more
Advantages compared to original brake lines:
- no loss of pressure when braking. Exact pressure point
- easy assembly. The original line is simply replaced by the braided steel line
- no swelling as with rubber lines
- cost savings, because the braided steel lines do not need to be changed every 3 or 5 years
- shorter braking
- protection against the rodents
- including ABE (General Operating Permit), no registration necessary
- great optics
Technical data:
- length: 23 cm
- connection 1 M12x1 male thread bent
- connection 2 M10x1 female thread straight
- flanging 90° connection : both E and F usable
Scope of delivery:
- 2x steel braided brake lines for VW Golf MK2, MK3, Jetta, Corrado, Caddy etc....
- material certificate
We also manufacture according to desired dimensions. With our steel braided lines configurator (click here), you can configure your steel braided brake line, according to your wishes. (Length, color and connections)
Login
- Does the steel braided brake line also fit other vehicles?
Yes, the brake line can be used in many other vehicles as well. Since almost all car manufacturers use the same size of thread for brake line fittings. Often the only difference is the concave or convex sealing surface. Our fittings are so-called hermaphrodite, which means that each fitting is suitable, concave (valley) and convex (mountain). All you have to do is measure the length and find out the thread size of the fitting you want for your line. So you can see if the line is suitable. You can find the exact details of the brake line in the product description under the technical data.
- There were 2 lens seals supplied with the steel faux lines. Where exactly are these installed?
the lens seals are always included with the orders. They are used to balance the cone, depending on the cone of the steel tube, see picture attached. With flare F you do not need the lens seals, with flare E they must be placed in the internal threads. The direction, which way around, does not matter.
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 1-piston 8N0615423C / 8N0615424C VW Golf R32 V6 / S3 brake caliper
- ✓ rear axle
- ✓ 288x221H0615301 Passat 35i VR6 VW brake disc
- ✓ 1-piston 8N0615423C / 8N0615424C VW Golf R32 V6 / S3 brake caliper
- ✓ rear axle
- ✓ 280x22 1J0615301E Golf 4 brake disc
- ✓ 1-piston 8N0615423C / 8N0615424C Golf 4 V6 / R32 Audi S3 brake caliper
- ✓ rear axle
- ✓ 280x22 535615301 Golf 2 G60 brake disc
- ✓ 1-piston 8N0615423C / 8N0615424C R32 / S3 brake caliper
- ✓ rear axle
- ✓ Bore 8mm
- ✓ straight
- ✓ For welding/screwing on
- ✓ Bore 7mm
- ✓ straight
- ✓ For welding/screwing on
- ✓ Bore 11mm
- ✓ 90° bent
- ✓ for welding/screwing
- ✓ Bore 7mm
- ✓ 90° bent
- ✓ for welding/screwing
- ✓ Inner diameter 9mm
- ✓ outer diameter 25mm
- ✓ rubber ring
- ✓ Inner diameter 7.5mm
- ✓ outer diameter 24mm
- ✓ rubber ring