Gesucht nach VW | Transporter III Pritsche/Fahrgestell | 1.9 | --

Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9

• ✓ gearbox adapter plate for VW T3 transporter / van to install a 012 Audi / Passat 5-speed gearbox

• ✓ for all  VW T2, T3 bus
• ✓ engine: to 1,9l TDI (90PS) 1Z

• ✓ for all VW T2, T3 bus transporter
• ✓ engine: to 1,9l TDI (116 HP) AFN

Full adaptation/fixation kit for installation of brake disc system T4 on rear axle of VW T3 Bus.

• ✓ for e.g VW T3 bus / transporter. Length 50cm
• ✓ connection 1 M10x1 external thread straight
• ✓ connection 2 M10x1 internal thread straight
• ✓ transparent covered

• ✓ drive shaft adapter for the VW T3 transporter to continue using the original drive shafts, also with the 012 Audi gearbox

• ✓ mounting bracket / holder / support for conversion to 012 VW / Audi 5-speed gearbox on model VW T3 transporter

Full front axle adaptation/fixation kit for installation of brake disc system from Audi A6 with
disc diameter 312x25mm in combination with Audi A6 brake calipers…..

• ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
• ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle

• ✓ for  all T3 bus / transporter with diesel engine from Yoc 84
• ✓ hydromount / hydraulic bearing  for all T3 bus / transporter with diesel engine from Yoc 84 and as manufacturer reference for Toledo, Golf MK3, etc

• ✓ for rear axle: VW T3 Bus
• ✓ brake caliper: VW Bus T4 
• ✓ brake disc: VW Bus T4 280x12mm (15 inch) or 294x13,5mm (16 inch)

• ✓ anti-theft protection system for pedals on T2 T3 bus, also Syncro Doka Pritsche Bulli

Full front axle adaptation/fixation kit for installation of brake disc system from Audi A6 with
disc diameter 312x25mm in combination with Audi A6 brake calipers…..

VW T3 BUS Rear axle brake adapter Girling 38 Brake disc transformation 268x10mm Brake caliper adapter

• ✓ for front axle: VW T3 bus  2WD
• ✓ brake caliper: Audi 100/A6 C4 Girling/ ATE 57 referecne: 4A0615123A + 4A0615124A 
• ✓ brake disc: Audi A4 Quattro, Audi A6 288x25mm 

• ✓ wheel bearing kit  for VW T3 transporter (one side) Suitable for all T3 buses built between 08/83 and 07/92 (except Syncro)

Wheel hub for front axle brake system conversion for installation of Audi A6
disc diameter 312x25mm in combination with Audi A6 brake calipers…

• ✓ engine mounting bracket / holder / support set for conversion of all VW T2/ T3 bus transporter van (also Syncro) 
• ✓ to ASZ 1.9 TDI PD 131PS engine, installed in Golf MK4 Audi A3 Seat Leon, etc

• ✓ 1x bent curved fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 11m
• ✓ bottom length: 30mm
• ✓ top length: 21mm
• ✓ width: 24mm

• ✓ for front axle: T3 transporter before year of manufacture 1986 with M12 screw mount on the axle
• ✓ brake caliper: Audi 100/A6 C4 Girling/ ATE 57, reference 4A0615123A + 4A0615124A
• ✓ brake disc: Audi A4 quattro, Audi A6 312x25mm, reference e.g 4B0 615 301 A

• ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection

• ✓ for rear axle: VW T3 bus
• ✓ brake caliper: Porsche reference : 996.352.421 + 996.352.422
• ✓ brake disc: A4 S4 rear axle  300x22mm  reference : 8E0 615 601 R 

• ✓ for rear axle: VW T3 Bus
• ✓ Brake caliper: VW Golf 3 4 G60 VR6 Girling 38 parts NR. 1H0698451F
• ✓ Brake disc: VW Sharan 2.8 VR6 (7M8, 7M9, 7M6) 268x10mm VW NR. 7M0615601

Tailor-made Wheel hub for for installation of brake disc system on rear axle of VW T3 Bus.

• ✓ for front axle VW T3 bus transporter Van
• ✓ brake caliper: Porsche Boxter S, reference 996.351.426 + 996.351.425
• ✓ brake disc: Mercedes S-Klasse 312x28 , reference WD00604

• ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection

• ✓ for all T3 bus. Diesel engines , YoC from 84
• ✓ for conversion to hydraulic bearing, reference: 3A0.199.402

• ✓ for front axle: VW T3 bus 2WD (not Syncro)
• ✓ brake caliper: Audi 100/A6 C4 Girling/ ATE 57 referecne: 4A0615123A + 4A0615124A 
• ✓ brake disc: Audi A4 Quattro, Audi A6 288x25mm 

• ✓ 1x bent curved fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 7m
• ✓ bottom length: 20mm
• ✓ top length: 23mm
• ✓ width: 18mm

• ✓ for all VW T2, T3 bus
• ✓ engine: to 1,9l TDI (131PS) ASZ

• ✓ 2x  drive shaft adapters in order to install the stable drive shafts from T3 Syncro onto 2WD 

• ✓ angle plates / exhaust mounting bracket for the VW T3 transporter/utility, engine conversion to 1.9l TDI AFN

• ✓ for front axle: T3 transporter before Year of Manufacture 1986 with M12 screw mount on the axlee
• ✓ brake caliper: Audi 100/A6 C4 Girling/ ATE 57, reference 4A0615123A + 4A0615124A
• ✓ brake disc: Audi A4 quattro, Audi A6 312x25 mm, reference 4B0 615 301 A       

• ✓ brake caliper adapter for front axle: VW T3 bus/transporter/van
• ✓ brake disc: Audi A6 347 x 30 mm, reference 4F0615301G
• ✓ brake caliper mit mounting bracket: ATE 981 + 982 from Audi A6 4F for 347mm disc, manufacture reference  8E0615124B
• ✓ 2 x required wheel hubs

• ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D

• ✓ Zimmermann Sport brake disc 360x32 Manufacturer's ref.  100.3347.70 / 100.3348.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapters article 940, article 808 and article 830 
• ✓ Audi A4 Avant RS4 quattro

• ✓ for front axle: VW T3 Bus
• ✓ brake caliper: Porsche Boxter S , reference 996.351.426 + 996.351.425
• ✓ brake disc: Mercedes S-Klasse 312x28 , reference 220 421 09 12

• ✓ eccentric for article 590 galvanized

• ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston

Hexagonal nut M08
Thread right
Galvanized

• ✓ brake caliper adapter for front axle: VW T3 bus/transporter/van
• ✓ brake disc: Audi A6 347 x 30 mm, reference 4F0615301G
• ✓ brake caliper mit mounting bracket: ATE 981 + 982 from Audi A6 4F for 347mm disc, manufacture reference  8E0615124B

• ✓ eccentric for article 244, galvanized

• ✓ gift voucher 50 Euro

• ✓ for front axle: 2WD VW T3 BUS
• ✓ brake caliper: original 8-piston RS4 B7 / R8 Brembo (20767502), reference left 8E0615107 / 3D0615107A + reference right 8E0615108 / 3D0615108A
• ✓ brake disc: Audi RS4 B7 365x34mm, reference 8E0615301AB

• ✓ spacing plate / bush / bushing for brake caliper adapter