You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Go to homepage
tuev sued logo
Made in germany
Shopping cart €0.00*

Modellwahl

#1
#2
#3
#5
Overview

Vehicle key number

Show all categories Engine & gearbox mounting brackets Back

VW T2 T3 Bus Van Engine Mounting Bracket Support Holder TDI 1,9l ASZ Doka Pritsche Syncro 2WD

VW T2 T3 Bus Van Engine Mounting Bracket Support Holder TDI 1,9l ASZ Doka Pritsche Syncro 2WD
VW T2 T3 Bus Van Engine Mounting Bracket Support Holder TDI 1,9l ASZ Doka Pritsche Syncro 2WD
VW T2 T3 Bus Van Engine Mounting Bracket Support Holder TDI 1,9l ASZ Doka Pritsche Syncro 2WD
VW T2 T3 Bus Van Engine Mounting Bracket Support Holder TDI 1,9l ASZ Doka Pritsche Syncro 2WD
VW T2 T3 Bus Van Engine Mounting Bracket Support Holder TDI 1,9l ASZ Doka Pritsche Syncro 2WD
VW T2 T3 Bus Van Engine Mounting Bracket Support Holder TDI 1,9l ASZ Doka Pritsche Syncro 2WD
VW T2 T3 Bus Van Engine Mounting Bracket Support Holder TDI 1,9l ASZ Doka Pritsche Syncro 2WD
VW T2 T3 Bus Van Engine Mounting Bracket Support Holder TDI 1,9l ASZ Doka Pritsche Syncro 2WD
VW T2 T3 Bus Van Engine Mounting Bracket Support Holder TDI 1,9l ASZ Doka Pritsche Syncro 2WD
VW T2 T3 Bus Van Engine Mounting Bracket Support Holder TDI 1,9l ASZ Doka Pritsche Syncro 2WD

€262.32*

Prices incl. VAT plus shipping costs

5 Reviews
Available
Delivery by Tuesday, 07.05.2024 if you order within the next 23 Hours.
Product number: 855
Weight: 6.809 kg

Engine mounting bracket / holder / support set for conversion of all VW T2/ T3 bus transporter van (also Syncro)to ASZ 1.9 TDI PD 131PS engine, installed in Golf MK4 Audi A3 Seat Leon, etc.

Our engine bracket / holder is designed so that it can be combined with the original engine bracket of the TD. No other support is required! The exhaust pipe bracket can be removed, or, depending on your choice, offset to the side, because adjustments are necessary when mounting the exhaust pipe bracket according to the geometrical specifications of the body.

As shown in the picture, the engine bracket / holder is delivered galvanized, therefore protected against corrosion, and has a very good optics.

Delivery:

  • 1x engine mounting bracket for VW T2, T3 bus transporter van. Conversion to 1,9l TDI (131PS) engine with engine classification code ASZ, including exhaust bracket for screwing on
  • 1x reinforced engine mounting bracket for the passenger side
  • material certificate

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

5 of 5 reviews

4.8 out of 5 stars

80%

20%

0%

0%

0%

Leave a review!

Share your experiences with other customers.

13 March 2024 17:02

Kalliopi T

It was as you describe it .... Perfect fitting...

22 May 2023 08:26

JOSE F

PERFECTO

13 October 2021 08:25

Leo L

Sehr stabil gebaut, würde erscheint lkw motor auch halten .

13 October 2021 08:25

Leo L

Sehr stabil gebaut, würde erscheint lkw motor auch halten .

8 September 2021 11:36

Peter E

Ich musste noch ein paar Anpassungen vornehmen, um es für einen 66kw AGR-Motor fit zu machen. Für weitere Informationen können Sie E-Mail an peter@agents-bv.nl Peter Eggermont

Passendes Zubehör

Engine holder Bracket Conversion VW T3 Bus Hydraulic Support Bearing Audi 2,8L TDI Engine
Engine holder Bracket Conversion VW T3 Bus Hydraulic Support Bearing Audi 2,8L TDI Engine
Gearbox mounting racket for the conversion to hydraulic support bearing on all T3 bus models. Diesel engines , YoC from 84. Thanks to our gearbox mounting bracket, you have the possibility to install a VW Golf or Audi hydraulic support bearing, which is much better, especially less noisy and less vibrations. On request, we also supply the hydraulic support bearing directly with the gearbox mounting bracket. hydraulic support bearing, reference: 3A0.199.402 The assembly is very easy: the original is simply replaced. Delivery: 1x kit of gearbox mounting brackets for conversion to hydraulic support bearing on all T3 bus mounting screws material certificate

€139.39*
Brake Caliper Adapter VW T3 Bus Conversion Porsche Brake System
Brake Caliper Adapter VW T3 Bus Conversion Porsche Brake System
Brake caliper adapter, VW T3 Bus to convert to front 4-piston Porsche Boxter brake caliper, combined with the 312x28mm Mercedes brake disc. With this brake conversion to Porsche brake system, the wheel hubs,which are supplied, maintain the standard VW PCD (bolt circle) and are identical. Therefore the wheel bearing remains the same. The track is wider by about 6 mm per side. Our adapter kit works with or without ABS. Rims: at least 16 inch Required components: brake caliper: Porsche Boxter , reference 996.351.426 + 996.351.425 (only 100% suitable for the mentioned Porsche calipers) brake disc: Mercedes S-Klasse 312x28 , reference WD00604 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters (see pictures) 2x wheel hubs high-strength mounting screws 2c center rings material certificate Stress analysis / FEM calculation for entry

€315.16*
Anti-Theft Protection Bus T3 for Pedal Syncro Doka Pritsche Bulli
Anti-Theft Protection Bus T3 for Pedal Syncro Doka Pritsche Bulli
Anti-theft protection system for pedals on T2 T3 bus, also Doka Pritsche Bulli, 2WD or Syncro. For all models with manual transmission. Thanks to our anti-theft pedal system, in which the clutch pedal and the brake pedal are enclosed, it is impossible to move your vehicle. We tested our system several times and no one was successful. An additional pedal support is not required. Thanks to the reduced design of our anti-theft pedal system, it can also be placed easily in the glove compartment. This system is directly ready for use, including with a padlock (see picture). Thanks to our device, the use of a bolt cutter or any other tool for the purpose of stealing a vehicle is impossible. The assembly is quick and easy. On request and at an additional cost, we also offer a steering wheel anti-theft look. Delivery: 1x anti-theft protection system for pedals on T3 Bus, 2WD and Syncro (all models with manual transmission) 1x padlock with 2 keys material certificate

€89.53*
Gearbox Mounting Bracket WBX for all VW T3 Bus Diesel 251399201K
Gearbox Mounting Bracket WBX for all VW T3 Bus Diesel 251399201K
Forward gearbox mounting bracket for all VW T3 buses. YoC 1979-1992. Suitable for 4 and 5 speed gearbox.Our gearbox mounting bracket replaces the original bracket which is no longer produced by VW. Our bracket has been improved and is more stable than VW's original.The number from VW to compare : 251399201K or L Delivery: 1x forward gearbox mounting bracket for VW T3, YoC 1979-1992 1x corresponding rubber sleeve / bushing material certificate

€110.48*
VW T3 Bus Drive Shaft Adapter Drive Shaft Flange Syncro
VW T3 Bus Drive Shaft Adapter Drive Shaft Flange Syncro
With our adapter made of high-strength steel it is finally possible to mount the extremely stable drive shafts from T3 Syncro (16-inch) onto 2WD. This is very important especially in the case of more powerful engines and engine conversions. PCD is adapted from 100mm to 108mm. The adapter has a  thickness of 12mm. Delivery: 2x drive shaft adapters in order to install the stable drive shafts from T3 Syncro onto 2WD complete screw material

€199.52*
VW T3 Bus TDI Starter Golf MK3 Bulli Britsche Doka Conversion Adapter
VW T3 Bus TDI Starter Golf MK3 Bulli Britsche Doka Conversion Adapter
Adapter plate made of aluminium to install the high-strength TDI starter onto VW T3 Bus/Synchro  TDI. If you want to convert your T3 bus to TDI, you should take over the Golf MK3 original starter, as it has much more power and a better transmission. original T3 Bus starter: 1,7KW and 9 cogs at the sprocket Golf MK3 starter: 2,0KW and 10 cogs at the sprocket click here for installation instructions Starters with the following Bosch number can thus be fitted precisely 0 001 125 012/013 (2,0 KW) 0 986 017 460 (2,0 KW) The adapter cable with the VW number: 000979227E and the corresponding plug with the number: 357972771 are additionally required for installation. Delivery: 1x adapter plate made of aluminium to install the high-strength Golf Mk3 starter onto VW T3 Bus/Synchro TDI. 2x mounting screws for the TDI starter installation instructions

€69.78*
%
VW Bus Transporter T2 T3 T4 Syncro Shaft Joint Screw Drive Shaft
VW Bus Transporter T2 T3 T4 Syncro Shaft Joint Screw Drive Shaft
high-strength shaft joint screw for all 16 inch Syncro models of VW T2 and T3 transporter series. Also fits T4 bus/transporter. Size: thread:  M10 thread pitch: 1,5 mm length: 50,0 mm quality: 12,9 mm surface: blank Delivery: 1x shaft joint screw for drive shaft on VW T2, T3 and T4 bus/transporter

€0.59* €1.02* (42.16% saved)
Gearbox Mounting Bracket Conversion VW T3 Bus Hydraulic Bearing Hydromount Audi 2,8L TDI Engine
Gearbox Mounting Bracket Conversion VW T3 Bus Hydraulic Bearing Hydromount Audi 2,8L TDI Engine
Gearbox / transmisson mounting bracket, inclusive hydromount / hydraulic bearing, for conversion to hydromount for all T3 bus / transporter diesel engines from YoC 84. With our gearbox bracket and hydraulic bearing, you have the opportunity to convert to the better hydraulic bearing of VW Golf or Audi, Assembly is very simple, is simply replaced with the original. Delivery: 1x kit for gearbox mounting bracket on T3 bus / transporter for conversion to  hydromount / hydraulic bearing 1x kit for hydromount / hydraulic bearing on T3 bus / transporter, or as manufacturer reference for Toledo, Golf MK3, etc complete screw kit  material certificate

€176.72*
You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
test
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT