Brake Caliper Adapter VW T2 transporter Mercedes W126 Brake Disc 300x28 Caliper Porsche Boxter Brake System Tuning Adapter
- ✓ 300x28 A1264210412 Mercedes W126 brake disc
- ✓ 4-piston 996351425 / 996351426 Porsche Boxter brake caliper
- ✓ front axle
€189.12*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, front axle, on model VW T2 transporter for conversion to the internally vented 300x28mm brake discs from Mercedes Benz W126, combiné with the Porsche Boxter calipers.
Advantages:
- top deceleration
- the system no longer warms up and no more fading
- thanks to the material certificate supplied with the order, it is possible to register your purchase
- quick and easy assembly with the supplied mounting screws
Required components:
- brake disc: Mercedes Benz W126 300x28 reference A 126 421 0412
- brake caliper: Porsche Boxter reference: 996.351.425 + 996.351.426
- The wheel hub must be modified so that the brake bell of the Mercedes brake disc fits over it. (can also be done in our house)
Lieferumfang:
- 2x brake caliper adapters for VW T2 transporter
- high-strength mounting screws
- material certificate
At least 16 inch rims should be used.
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
6 February 2023 08:14
Stephan S
Passt alles bestens! Bitte weiter so! Durch Adapter und herkömmliches Zubehör sehr viel Geld gespart, Umbau auf vergleichbare Originalbremse von Porsche/ Benz kostet das 3-4 fache.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ 300x28
- ✓ 80mm centering
- ✓ 68.5mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ to configure yourself
- ✓ with TÜV certificate
- ✓ best quality
- ✓ 300x28
- ✓ 80mm centering
- ✓ 68.5mm height
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
