Brake caliper adapter Golf 1 Caddy 14D Scirocco Jetta Porsche 996 4-piston brake caliper 330x28 Brake disc tuning adapter
- ✓ 330x28 51827474 Lancia Delta brake disc
- ✓ 4-piston 996351425 / 996351426 Porsche 996 brake caliper
- ✓ front axle
£112.26*
% £180.92* (37.95% saved)- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for the front axle of the Golf 1, Golf 1Cabrio, Caddy 14d, Jetta 1, Scirocco to the 330x28mm Lancia Delta III brake discs in conjunction with 4-piston Porsche 996 brake calipers.
Advantages of this braking system:
- Extreme deceleration values also in conjunction with our rear axle brake system
- Brake discs with 4 bolt circle. The original Golf 1 bolt circle can therefore be retained.
- Thanks to the material certificate included in the scope of delivery, registration via individual approval is also possible for standard vehicles
- Fits directly on the above-mentioned models and can therefore be easily retrofitted back to the original condition at any time
- Our EPYTEC brake caliper adapters do not require you to send in your standard parts, no rewelding - re-milling or re-drilling
Required components:
- Brake discs Lancia Delta III 330x28 Total height 45mm Original part no.: 51827474.
- The hub bore must be turned up to 65.00mm (can also be done in-house, click here)
- Porsche brake calipers from 996 Porsche original part no.: 996.351.425/426 (Only 100% compatible with the specified Porsche calipers)
Not STVO-approved, but the material certificate included in the scope of delivery can also be used to enable registration by individual approval for series vehicles.
Minimum rim size:
- Can be used with 17 inch rims and larger. The minimum size of the inner diameter may vary depending on the rim shape and type.
Scope of delivery:
- 2x brake caliper adapter for VW Golf 1, Caddy 14D, Scirocco, Jetta
- Matching high-strength screw set
- 1x material certificate
Tipps, Infos und Hinweise:
- Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
- Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
- Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.
>> Jetzt direkt zu Spurverbreiterungen nach Wunsch << - Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.
Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
| Motor | Motorcode |
|---|---|
| 1.6 | 16|75PS(55KW) |
| 1.6 D | 16|54PS(40KW) |
| 1.6 | 16|85PS(63KW) |
| 1.5 | 16|70PS(51KW) |
| 1.6 GLI | 16|110PS(81KW) |
| 1.5 D | 16|50PS(37KW) |
| 1.6 TD | 16|70PS(51KW) |
| 1.1 | 16|50PS(37KW) |
| 1.3 | 16|60PS(44KW) |
| 1.8 | 16|112PS(82KW) |
| Motor | Motorcode |
|---|---|
| 1.1 | 17|50PS(37KW) |
| 1.6 | 17|75PS(55KW) |
| 1.6 TD | 17|70PS(51KW) |
| 1.1 | 17|52PS(38KW) |
| 1.5 D | 17|50PS(37KW) |
| 1.8 GTI | 17|112PS(82KW) |
| 1.6 GTI | 17|110PS(81KW) |
| 1.3 | 17|60PS(44KW) |
| 1.6 D | 17|54PS(40KW) |
| 1.5 | 17|70PS(51KW) |
| Motor | Motorcode |
|---|---|
| 1.6 D | 14|55PS(40KW) |
| 1.5 | 14|70PS(51KW) |
| 1.6 | 14|75PS(55KW) |
| 1.8 | 14|95PS(70KW) |
| Motor | Motorcode |
|---|---|
| 1.8 | 155|95PS(70KW) |
| 1.5 | 155|70PS(51KW) |
| 1.8 | 155|90PS(66KW) |
| 1.8 | 155|111PS(82KW) |
| 1.8 | 155|98PS(72KW) |
| 1.8 | 155|112PS(82KW) |
| 1.3 | 155|54PS(40KW) |
| 1.6 | 155|75PS(55KW) |
| 1.6 | 155|110PS(81KW) |
| 1.6 | 155|72PS(53KW) |
| Motor | Motorcode |
|---|---|
| 1.5 | 53|70PS(51KW) |
| 1.1 | 53|50PS(37KW) |
| 1.3 | 53|60PS(44KW) |
| 1.6 | 53|70PS(51KW) |
| 1.6 | 53|85PS(63KW) |
| 1.6 | 53|110PS(81KW) |
| 1.5 | 53|75PS(55KW) |
| 1.6 | 53|75PS(55KW) |
| 1.5 | 53|86PS(63KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 16|75PS(55KW) |
| 1.6 D | 16|54PS(40KW) |
| 1.6 | 16|85PS(63KW) |
| 1.5 | 16|70PS(51KW) |
| 1.6 GLI | 16|110PS(81KW) |
| 1.5 D | 16|50PS(37KW) |
| 1.6 TD | 16|70PS(51KW) |
| 1.1 | 16|50PS(37KW) |
| 1.3 | 16|60PS(44KW) |
| 1.8 | 16|112PS(82KW) |
| Motor | Motorcode |
|---|---|
| 1.1 | 17|50PS(37KW) |
| 1.6 | 17|75PS(55KW) |
| 1.6 TD | 17|70PS(51KW) |
| 1.1 | 17|52PS(38KW) |
| 1.5 D | 17|50PS(37KW) |
| 1.8 GTI | 17|112PS(82KW) |
| 1.6 GTI | 17|110PS(81KW) |
| 1.3 | 17|60PS(44KW) |
| 1.6 D | 17|54PS(40KW) |
| 1.5 | 17|70PS(51KW) |
| Motor | Motorcode |
|---|---|
| 1.6 D | 14|55PS(40KW) |
| 1.5 | 14|70PS(51KW) |
| 1.6 | 14|75PS(55KW) |
| 1.8 | 14|95PS(70KW) |
| Motor | Motorcode |
|---|---|
| 1.8 | 155|95PS(70KW) |
| 1.5 | 155|70PS(51KW) |
| 1.8 | 155|90PS(66KW) |
| 1.8 | 155|111PS(82KW) |
| 1.8 | 155|98PS(72KW) |
| 1.8 | 155|112PS(82KW) |
| 1.3 | 155|54PS(40KW) |
| 1.6 | 155|75PS(55KW) |
| 1.6 | 155|110PS(81KW) |
| 1.6 | 155|72PS(53KW) |
| Motor | Motorcode |
|---|---|
| 1.5 | 53|70PS(51KW) |
| 1.1 | 53|50PS(37KW) |
| 1.3 | 53|60PS(44KW) |
| 1.6 | 53|70PS(51KW) |
| 1.6 | 53|85PS(63KW) |
| 1.6 | 53|110PS(81KW) |
| 1.5 | 53|75PS(55KW) |
| 1.6 | 53|75PS(55KW) |
| 1.5 | 53|86PS(63KW) |
- ✓ mechanical tension roller
- ✓ 1.8T engine conversion
- ✓ Golf 1, Scirocco, Caddy 14d
- ✓ Brake force regulator 3/15
- ✓ conversion to G60 16V VR6
- ✓ OE NO: 486145
- ✓ Hydraulic clutch slave cylinder
- ✓ Golf 1, 2, 3, Audi A3, Seat Leon
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta 1&2
- ✓ 02A/02J gearbox, 1.8T from Golf 4
- ✓ Golf 1 bearing outer diameter 64mm
- ✓ Complete set of 4
- ✓ Reinforced Shore 65-70
- ✓ Golf 1 Caddy 14D Scirocco Jetta
- ✓ 280x22 535615301 G60 brake disc
- ✓ 1-piston Girling 54 443615124A / 443615123A brake caliper
- ✓ front axle
- ✓ Complete KIT
- ✓ length 1.34m
- ✓ OE NR: C357721335E
- ✓ 4x100 to 5x112
- ✓ 20mm per side
- ✓ 57.1 -> 57.1 centering
- ✓ Registration free
- ✓ For shift linkage
- ✓ stainless steel
- ✓ Hydraulic clutch complete conversion kit
- ✓ Golf 1, Golf 1 Cabrio, Caddy 14D, Jetta, Scirocco
- ✓ Engine conversion from the Golf 4, original pedals are retained
- ✓ VW Golf 2, Golf 3 Passat, Corrado, Jetta, Vento
- ✓ 02a 02j 5 gear
- ✓ 1.8T 16V G60 conversion
- ✓ Suitable for our master brake cylinders
- ✓ plug and play
- ✓ quickly installed
- ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta
- ✓ 02A/ 02J 5-speed, 02M 6-speed gearbox
- ✓ 1.8T, 1.9TDI, G60
Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.
- ✓ For Golf 1 Caddy
- ✓ On Golf 4 Accelerator Pedal
- ✓ OE:VW 1J1721503E
- ✓ Hydraulic line
- ✓ Golf 1, 2, 3, Corrado, Vento, Scirocco, Caddy
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ 02M transmission conversion to FWD
- ✓ simple conversion
- ✓ Golf 1, Golf 2, 3, Golf 4 series
- ✓ 020 Gearbox
- ✓ 4&5Gang
- ✓ OE:VAG WZ 3104
Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.