Audi S2 Audi 80 90 GT3 996 Brake System Brake Caliper Adapter Audi S8 345x30mm Brake Disc Brembo Porsche 996/GT3 Tuning Adapter
- ✓ 345x30 4D0615301B Audi S8 brake disc
- ✓ 4-piston 996351429 / 996351430 Porsche 996/GT3 brake caliper
- ✓ front axle
€225.41*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Suitable for:
- Audi S2
- Audi 80
- Audi 90
Vorteile der Bremsanlage:
- 17 inch rims can still be used
- optimal use of the friction surface on the brake disc
- high deceleration, also in conjunction with our rear axle braking system
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Required components:
- brake caliper: Porsche 996/GT3, reference 996.351.429 and 996.351.430
- brake disc: Audi S8 345x30mm, reference 4D0615301B
- wheel hub of the S2 with 5x112 must be installed (also available in our shop Item number: 46859)
Delivery:
- 2x brake caliper adapters for Audi 80, 90, S2, etc
- high-strength mounting screws
- material certificate
Tipps, Infos und Hinweise:
- Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
- Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
- Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.
>> Jetzt direkt zu Spurverbreiterungen nach Wunsch << - Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.
Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
12 April 2023 05:15
Christian B
Wie immer zu 100% zufrieden.
26 July 2020 12:09
Manuel S
Sehr gute Beratung und geht alles sehr schnell
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 302x12 240112-01761 A6 brake disc
- ✓ original Audi S2b Coupe brake caliper
- ✓ rear axle
- ✓ 345x30
- ✓ 68mm centering
- ✓ 68mm height
- ✓ 345x30
- ✓ 68mm centering
- ✓ 60mm height
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 302x12 4F0615601G Audi A6 brake disc
- ✓ 1-piston 853615423 / 853615424 Audi S2 Coupe brake caliper
- ✓ rear axle
- ✓ 345x30
- ✓ 68mm centering
- ✓ 60mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Audi 80 B4
- ✓ 1.8T engine from the Audi A4 B5, Audi A6, VW Passat 3B
- ✓ Torque arm from ABK motor, viscous fan must be removed
- ✓ Pulley
- ✓ Audi 80 RS 2, S2 Quattro, Coupe B3 S2 Quattro.
- ✓ AUDI 034105251M, AUDI 054105255E
