Audi S2 80 90 Brake Caliper Adapter Big Red 993 Brake Calipers 323x30 Audi A8 Brake Disc Tuning Adapter
- ✓ 323x30 4D0 615 301A Audi A8 brake disc
- ✓ 4-piston 993351425 993351426 Porsche 993 Big Red brake calipers
- ✓ front axle
€215.68*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter to mount the Porsche Big Red 993 calipers in conjunction with the large brake discs in 323x30 from the Audi A8 on the Audi S2, Audi 80 / 90, with original 5 x112 or 5x112 bolt circle conversions.
The standard Audi bolt circle can be retained. Thus, the complex and costly 5x130 mm Porsche bolt circle conversion is not required.
Furthermore, 16 inch rims can be driven with this brake system
Required components:
- Porsche 993 Big Red Brake Calipers Part No: 993.351.425 / 993.351.426
- Brake pads part number: 92835194002
- Brake discs from Audi A8 in 323x30 OE numbers: 4D0 615 301A
- Wheel hub from Audi S2 with 5x112 must be installed (also available in our store. Part number: APA185 click here)
Important: Our brake caliper adapters only fit with the specified components, please be sure to use them exactly.
Advantages of this brake system:
- high deceleration, also in conjunction with our rear axle braking system
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
- quick and easy assembly
- anticorrosiv according to DIN ISO 9227
Delivery:
- 2x brake caliper adapters (see pictures)
- suitable high-strength screw set
- material certificate
- copy of vehicle documents to simplify the registration
- Stress analysis / FEM calculation for entry
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
5 April 2018 07:27
rstking123
Good seller and good product, thank you :) +++++
20 January 2017 10:19
stevensmith19712012
Excellent quality and perfect fit. Great help👍
17 September 2016 00:31
tuningandre
Top Ware und schnell verschickt,gerne wieder. 4* 5 sterne
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 323x30
- ✓ 68mm centering
- ✓ 59mm height
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Audi S2 RS2
- ✓ 01E 6-speed gearbox from 01E 6-speed gearbox
- ✓ simple gearbox conversion
- ✓ front axle
- ✓ Audi 80 S2 quattro, Coupe 2.3 20V
- ✓ HPS coupling rods and tie rod ends OE number 895 407 148A
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ Audi 80 S2
- ✓ 323x30
- ✓ 68mm centering
- ✓ 59mm height
- ✓ 323x30
- ✓ 68mm centering
- ✓ 59mm height
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track