Audi 80 100 A4 A6 Camber Correction Adjustement Plates 2 Degrees Negative Camber Rear Axle
- ✓ 2.0 degrees negative
- ✓ 5mm thickness
- ✓ suitable for Audi 80 100 A4 A6
€65.48*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Camber correction / adjustement plates for rear axle to adjust camber.
Thanks to our plates, you can modify the rear camber. Ideal for lowering the rear axle and correcting the angle defect if the tires are worn out only on one side.
These plates give your vehicle 2.0 ° negative camber. This means that the tires in the wheel arch are inclined 2.0 ° inwards.
We recommend it for racing or slalom circuits. Or simply on the road, to take turns at a higher speed.
Our plates are mounted between the pivot of the axle stub and the axle. Quick and easy assembly. The wheels are then moved 5mm outwards. The plates are manufactured with high precision.
Its are made of steel and completely galvanized. Maximum anticorrosive protection and good optics.
Suitable for following models:
- 100/A6, model 4A,C4 ~ YoC 1990-97
- 80 und 90, model 89, 8A, 8C B4 ~ YoC 1986-94
- A4, model 8D,B5 ~ YoC 1995-2001
- Cabriolet, model 8G,B4 ~ YoC 1991-2000
- Coupe, 81, 85, 89, 8B ~ YoC 1981-96
Delivery:
- 2x camber correction / adjustement plates, rear axle, right and left, With 2.0 ° negative for Audi 80 100 A4 A6 models
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
20 November 2018 06:36
Manuel P
Die Platten sehen gut verarbeitet aus. Mal sehen wie es ist wenn sie verbaut sind
18 April 2019 10:40
Benjamin N
is ok
12 September 2023 14:32
Aileen H
Ich denke optimiert werden kann, das bei einem audi 80 die Abslampe leuchtet nach dem Einbau das man soetwas evt erwähnt. Das Ergebnis nach dem Einbau war alles super außer die Abs Lampe. Ich habe euch gewählt da ihr eine abe habt, was leider nicht der fall war. Aber alles zusammen würde ich euch definitiv weiter empfehlen. Produkt war gut verpackt und der email Verkehr mit euch war auch super und schnell
4 June 2019 13:15
Eqos E
Preisleistung wirklich gut.
28 June 2021 07:28
Pol P
Perfect
1 June 2018 07:03
Tino S
Alles gut,immer wieder gerne.
12 July 2023 08:18
Chandra B
alles bestens...sage danke gerne wieder...
9 October 2018 13:48
Alex S
Einmal mehr kam die Lösung für ein technisch Problem von Epytec: Top Proukt, guter Service, und vorallem, man bekommt es niergendwo sonst ! Ich habe es bereits weiterempfohlen ;) gruss und bis zum nächsten mal alex
3 November 2023 08:22
Manuel F
Alles top, keine grade keine späne kein anpassen und super preis
14 November 2018 07:57
Rico G
- komplett zufrieden - Produkt wie erwartet - Freunden
- Does the ABS still work after installing the camber adjustment plate?
From a camber of 1 °, the ABS sensor may no longer be parallel to the ABS ring. Then, the position of the ABS sensor on the vehicle should be slightly changed.
- ✓ Audi A4 B5
- ✓ Better directional stability
- ✓ Easy installation
- ✓ 300x22 8E0615601K Audi S4 B7 brake disc
- ✓ 1-piston 8D0615423D / 8D0615424D RS4 B5 brake caliper
- ✓ rear axle
