Wheel Hubs Golf MK4 Bora Audi A3 TT TTRS RS3 Audi TT Conversion to 5x112 V6 R32 PCD Adapter Front
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ VW Golf 4 Bora / Audi A3 / Audi TT quattro
€150.42*
- 30 days money back guarantee
- shipping within 24h
- 15 years expert knowledge
- 2 years warranty
Wheel hubs for conversion to 5x112 PCD , front axle on Golf MK4 series , inclusive ABS sensor ring.
In all Quattro or 4WD vehicles such as R32 S3, etc., this wheel hub also fits the rear axle.
Who wants to at last convert his Golf MK4, Bora, Audi A3 TT TTRS RS3 , Audi TT, etc, to 5x112mm PCD, is here just right!
This is the perfect solution as the original hub can not be re-drilled because the diameter is too small. Thus, you finally can drive with rims having 5x112 PCD, without adapter plates are needed.
Advantages:
- rims with 5x112 without spacer plates
- 100% fitting
- completely galvanized, therefore best corrosion protection
- the 5x112mm hubs are equipped with M14x1,5 thread. Thus, the original wheel bolts for the VW and Audi rims can be used
- is not authorized under the STVO (German Road Licensing Law) However, it is possible to register your purchase even for series vehicles
- ABS mounting rings are supplied
Delivery:
- 2x wheel hubs with 5 x 112 PCD and M14x1,5 thread, with ABS sensor ring, for front axle of Golf MK4 Bora Audi A3 TT TTRS RS3 Audi TT
- material certificate
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
2 May 2018 08:29
Lukas O
Fit perfect
28 April 2023 05:57
Jan L
alles klar
11 September 2021 12:50
Bruno C
Très bonne qualité
26 May 2018 13:17
Tim H
Passt perfekt ...
24 June 2023 17:54
David F
Ich wollte bei meinem golf 4 felgen montieren die es nur mit 5/112 gibt. Ich bin sehr zufrieden mit den radnaben. Der abs ring baut 1 mm mehr auf als der originale, somit musste ich die abs Sensoren mit einer unterlegsscheibe unterlegen. Passt perfekt.
28 February 2019 11:42
MATHIEU R
Très bon produit. Qualité excellente
21 May 2019 21:22
Ivan G
Quality of the product. I did not install product yet, i am planning soon.
12 December 2019 14:01
Tiago F
Good material
2 June 2021 11:28
Kevin H
Super Produkt, darauf hat man glaube schon vor 20 Jahren gewartet.
30 December 2020 11:23
Patrick G
Alles perfekt! Top Qualität und sehr schnelle Lieferung! Kann diese Firma zu 100% weiterempfehlen!
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems