VW Golf MK4 Bora 1,8T Polo Audi A3 Brake Caliper Adapter Porsche Cayenne Brake Rear Axle
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
€495.68*
Average rating of 4.8 out of 5 stars
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, rear axle, on all 4WD models Golf MK4 Bora Vento Audi A3, etc, for conversion to Porsche Cayenne caliper, combined with the 310x22 mm VW Phaeton brake discs, rear.
The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear axle of Audi S3 or Golf MK4 R32 is additionally used for a handbrake brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper.
Thanks to the plates, the track is 15 mn wider per side.
Suitable for the following VW and Seat models (4WD):
- Audi A3 8L
- Audi TT 8N
- Seat Leon
- Seat Toledo 1M2
- Skoda Octavia 1U
- VW Golf MK4
- VW Bora/Jetta mk4
Advantages of this brake system:
- top deceleration, without comparison with conventional brake discs
- better performance
- supplied material certificate
Required components:
- brake caliper: Porsche Cayenne, rear axle, reference 955.352.421 + 955.352.422 / Brembo reference left 20.7673.03 + right 20.7673.04
- brake caliper mounting bracket , rear axle, Audi S3 8L or VW Golf R32
- brake disc: 310x22 rear VW Phaeton (PCD of the disc have to be modified to 5x100 - service available from EPYTEC)
Delivery:
- 2x brake caliper adapters for Porsche caliper
- 2x brake caliper adaper for R32 / S3 hand brake caliper
- 2x spacers under the discs
- 4x flexible braided brake lines
- high strength mounting screws
- material certificate
- Stress analysis / FEM calculation for entry
- Installation instructions (click here)
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
10 of 13 reviews
Average rating of 4.8 out of 5 stars
4.85 out of 5 stars
Login
6 November 2019 13:38
Review with rating of 5 out of 5 stars
Luis C
Great parts quality is perfect 👌
9 April 2020 06:33
Review with rating of 5 out of 5 stars
Erich N
Das Preis Leistungs Verhältnis von EPYTEC ist der Hammer, kann man nur weiter empfehlen, die extreme Passgenauigkeit und die Qualität der Materialien einfach Spitze, und Hut ab von der Größen Auswahl an Umbaumöglichkeiten für so viele Marken und Modellen, weiter so
15 June 2023 09:05
Review with rating of 5 out of 5 stars
Florian H
Bauteile sind sehr gut und auf jeden Fall weiterzuempfehlen
28 April 2021 12:55
Review with rating of 5 out of 5 stars
Daniel H
Everything fits as it should this kit is far superior to other kits available on the market this is a must buy if you want bolt on, high quality and comes with all bolts and adapter
11 January 2024 14:14
Review with rating of 5 out of 5 stars
Gary S
u guys is one Best in world
10 June 2021 12:35
Review with rating of 5 out of 5 stars
Adam S
The product arrived packaged very well and it appears impressively made. I have not yet fitted the product for my application because I need to make an additional 15mm or 16mm spacer to the bracket that mounts to the wheel bearing housing and will therefore have to purchase a thicker spacer for the brake disc. I am attempting to fit the kit to Audi 80 b2 quattro rear running gear.
15 August 2021 13:51
Review with rating of 5 out of 5 stars
Jan L
perfekt !!!
1 December 2021 20:43
Review with rating of 5 out of 5 stars
Hendrik V
Snelle leverung Past genau
18 April 2018 06:16
Review with rating of 5 out of 5 stars
Marco S
Top :)
10 January 2024 23:12
Review with rating of 5 out of 5 stars
Gary S
u guys is one Best in world
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
-
Audi|A3|1.8 T quattro|8L1
-
Audi|A3|1.9 TDI quattro|8L1
-
Audi|A3|S3 quattro|8L1
-
Audi|TT Roadster|1.8 T quattro|8N9
-
Audi|TT Roadster|3.2 VR6 quattro|8N9
-
Audi|TT|1.8 T quattro|8N3
-
Audi|TT|3.2 VR6 quattro|8N3
-
Seat|Leon|1.8 T Cupra R|1M1
-
Seat|Leon|1.9 TDi Syncro|1M1
-
Seat|Leon|2.8 Cupra 4|1M1
-
Skoda|Octavia 1|1.8 T 4x4|1U2
-
VW|Golf 4|1.8 4motion|1J1
-
VW|Golf 4|1.9 TDI 4motion|1J1
-
VW|Golf 4|2.0 4motion|1J1
-
VW|Golf 4|2.3 V5 4motion|1J1
-
VW|Golf 4|2.8 V6 4motion|1J1
-
VW|Golf 4|3.2 R32 4motion|1J1
-
VW|New Beetle|RSI 3.2 4motion|1C1, 9C1
- ✓ 334x32 1J0615301AA 1J0615302 A Golf 4 R32 brake disc
- ✓ 6-piston 7L6615123T / 7L6615124T Porsche Cayenne / VW Tuareg brake caliper
- ✓ front axle
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ 310x22
- ✓ 68mm centering
- ✓ 42mm height
Average rating of 4.6 out of 5 stars
- ✓ 310x22
- ✓ 68mm centering
- ✓ 42mm height
Average rating of 4.9 out of 5 stars
- ✓ Brake disc bolt circle drilling special design
- ✓ Drill an additional 2nd bolt circle in the brake disc
- ✓ Turn up hub diameter
Average rating of 5 out of 5 stars
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 330x22 4F0615601B Audi A6 brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ 310x22
- ✓ 68mm centering
- ✓ 42mm height
Average rating of 5 out of 5 stars
- ✓ 310x22
- ✓ 68mm centering
- ✓ 42mm height
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
Average rating of 5 out of 5 stars
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
Average rating of 5 out of 5 stars
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
Average rating of 5 out of 5 stars
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
Average rating of 4.7 out of 5 stars
- ✓ Brake force regulator Infinitely variable
- ✓ Perfectly adjustable braking effect
- ✓ suitable for all vehicles
Average rating of 5 out of 5 stars
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
Average rating of 4.6 out of 5 stars
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
Average rating of 5 out of 5 stars
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
Average rating of 5 out of 5 stars
- ✓ 370x32 8J0615301F TTRS brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne ZR18 / ZL18 brake caliper
- ✓ front axle
Average rating of 5 out of 5 stars
- ✓ 310x22
- ✓ 68mm centering
- ✓ 42mm height
Average rating of 4.9 out of 5 stars
- ✓ sealing plugs
- ✓ brake caliper
- ✓ M10x1 brake line connector
Average rating of 5 out of 5 stars
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
Average rating of 4.9 out of 5 stars
- ✓ 334x32 8N0615301B 1J0615301 R32 brake disc
- ✓ 6-piston Z18 95535142153 / 95535142253 Cayenne brake caliper
- ✓ front axle
Average rating of 4.9 out of 5 stars
- ✓ 334x32 1J0615301AA 1J0615302 A Golf 4 R32 brake disc
- ✓ 6-piston 7L6615123T / 7L6615124T Porsche Cayenne / VW Tuareg brake caliper
- ✓ front axle
- ✓ Choice of color
- ✓ ZR18 / Z18 4-piston brake calipers
- ✓ 955.352.421 / 955352421 955.352.422 / 955352422 7L6615423H / 7L6615423L / 7L6615423D / 7L6615423G
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
- ✓ 334x32 8N0615301B 1J0615301 R32 brake disc
- ✓ 6-piston Z18 95535142153 / 95535142253 Cayenne brake caliper
- ✓ front axle
Average rating of 5 out of 5 stars
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
- ✓ Desired color can be selected
- ✓ Golf 4 R32 1-piston brake calipers
- ✓ 8N0615423C / 8N0615424C / 1J0615425
- ✓ 310x22
- ✓ 68mm centering
- ✓ 42mm height
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
- ✓ Rear axle
- ✓ Audi TT 8N Quattro, Audi S3 8L, VW Golf 4 R32, VW Beetle RSI, VW Bora V6
- ✓ reinforced and bend-proof
- ✓ Hole circle: 5x100
- ✓ Thickness: 15mm
- ✓ Centering 57.1->67.8
- ✓ Choice of color
- ✓ ZR18 / Z18 4-piston brake calipers
- ✓ 955.352.421 / 955352421 955.352.422 / 955352422 7L6615423H / 7L6615423L / 7L6615423D / 7L6615423G