VW Golf 4 Polo 9N VW Polo 6r WRC Bora Audi A3 TT TTRS RS3 Audi TT Brake Caliper Adapter 370x32 Disc
- ✓ 370x32 8J0615301F TTRS brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne ZR18 / ZL18 brake caliper
- ✓ front axle
€196.73*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for Golf 4 series, front axle, to install the brake caliper of Cayenne ZR18, combined with the original brake disc of TTRS.
Suitable for following vehicles:
- Audi A3 (8L)
- Audi TT (8N)
- VW Golf MK4
- VW Bora
- VW Beetle
- VW Polo 6R WRC
- Seat Ibiza
- Seat Leon
As the TTRS disc could touch the wishbone because of its high height, we have developed spacers of 8mm thickness, which are mounted under the brake disc. The discs are thus pushed outwards. In addition, the disc with the plate is perfectly centered on the axle stub. The spacers are naturally contained in the delivery.
Important!:
The adapter is only suitable for cast wishbones OE: 8N0 407 151 A.
These are installed as standard in the Golf 4 R32, Audi S3 8L, and Audi TT 8N 1.8T and the Quattro models. All other models of the Golf 4, Audi A3 series must be converted to this cast wishbone, otherwise no more steering is possible. Article APA100 The stabilizer OE: 1J0411305AF must also be converted in vehicles that do not have the cast wishbone installed as standard.
We have the right wishbones in the matching accessories and can be ordered directly.
The problem with the wishbone only affects conversions to Z18 and Z17 calipers. With all other adapters that we still have, such as conversion to 4-piston Porsche Boxter, Audi TTRS or 6-piston Porsche Panamera brake calipers for the Golf 4 Audi A3 series, the adapters fit with all wishbones.
Advantages of this brake system:
- high deceleration
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Required components:
- brake calipers Porsche Cayenne ZR18 ZL18 , reference 95535142153 / 95535142253
- brake pads: we recommend to use the pads from the ZR 17 brake calipers
- brake discs TTRS 370x32 mm , reference 8J0615301F (The RS3 disks are not suitable, it is another depth)
- adapters are suitable only with the original ball joints.
- modification of the disc PCD from 5x112 to 5x100 (possibility of making it directly from EPYTEC)
At least 19 inch rims must be used
Delivery:
- 2x brake caliper adapters
- 2x spacers under discs
- high-strength mounting screws
- copy of vehicle documents
- material certificate
- Template to check whether the brake system fits under your rim
- stress analysis
Tips, information and notes:
- For better ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, where you can assemble and then install them according to your requirements.click here for the steel braided line configurator >>configure steel braided brake line<<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
28 July 2018 15:58
Ludwig O
Rasche Lieferung.
8 August 2021 09:07
Jan L
super super super gut arbeit und sofort versand
6 November 2019 13:38
Luis C
Great parts quality is perfect 👌
11 September 2019 09:23
Chester B
PERFECT FITMENT AND TOUGH PRODUCT
12 December 2019 13:56
Hideg T
Good parts!
22 August 2021 09:53
Jan L
super gut perfeckt
15 December 2019 10:40
Hubert M
Wegen der Passgenauigkeit . Die Adapter sind für meinen Einbau Perfekt. Ja auf jeden fall. Mir fällt dazu nichts ein.Das Paket war nach 2 Tagen schon angekommen. Preis und Qualität des Artikel stimmen. Nein ich habe bei Ihnen schon einmal eingekauft. Die Teile wurden noch nicht verbaut. das letzte mal hat als gut gepasst.
30 October 2021 03:49
Ritchi N
produit aux top livraison rapide résultat impeccable après linstallation
23 February 2020 13:32
Dimitar A
Perfect work dudes ! Nicely packaged to me i'm happy , will send you alot pictures when i put in !
20 January 2022 20:49
Antonio J
Productos de calidad De momento todo correcto A mis amigos Es una empresa seria
- Why is the Epytec adapter only suitable for the original fixation ball joints?
This is due to the fact that you have to pay attention to the diameter of the ball joint. It should be compared in advance whether the ball joint has the same diameter as the original, as different manufacturers use different diameters. If the diameters are the same, the adapters are suitable.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 330x22 4F0615601B Audi A6 brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ 280x22 1JO615301E VW Golf 4 / Audi A3 brake disc
- ✓ 1-piston 8N0615423C 8N0 615 424C VW1J0615425 VW Golf 4 / Audi A3 brake caliper
- ✓ rear axle
- ✓ 370x32 8J0615301F TTRS brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne ZR18 / ZL18 brake caliper
- ✓ front axle
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ Desired color can be selected
- ✓ ZR18 / ZL18 Cayenne brake calipers
- ✓ 95535142153 / 955.351.421.53 95535142253 / 955.351.422.53 7L6615123Q / 7L6615149 / 7L6615123J / 7L6615123N
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 370x32 8J0615301F TTRS brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne ZR18 / ZL18 brake caliper
- ✓ front axle
- ✓ Brake disc bolt circle drilling special design
- ✓ Drill an additional 2nd bolt circle in the brake disc
- ✓ Turn up hub diameter
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 370x32 8J0615301F TTRS brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne ZR18 / ZL18 brake caliper
- ✓ front axle
- ✓ 370x32
- ✓ 65mm centering
- ✓ 49.8mm height
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
- ✓ 370x32 8J0615301F TTRS brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne ZR18 / ZL18 brake caliper
- ✓ front axle
- ✓ rim centric ring / extension bush, high-strength steel, for VW Golf MK4 Polo 9N Bora Audi A3 TT
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ 330x22 4F0615601B Audi A6 brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 4-piston 996352421 / 996352422 Audi S3 8L VW Golf R32 brake caliper
- ✓ rear axle
- ✓ Front axle left
- ✓ Golf 4, Audi A3, Bora, Skoda Octavia, Seat Leon
- ✓ OE number 1J0407271AH AUDI
- ✓ 330x22 4F0615601B Audi A6 brake disc
- ✓ 4-piston 955352421 / 95535242 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Reinforced and bend-proof
- ✓ Longer service life
- ✓ TÜV tested
- ✓ 1J0411305AF
- ✓ OEM quality
- ✓ Golf 4 R32
- ✓ 370x32
- ✓ 65mm centering
- ✓ 49.8mm height
- ✓ Thread M14x1.5
- ✓ ensures comfortable installation of your upgrade brake
- ✓ makes work easier
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
- ✓ rim assembly
- ✓ M14x1.5 on the wheel hub
- ✓ precise centering
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ Desired color can be selected
- ✓ ZR18 / ZL18 Cayenne brake calipers
- ✓ 95535142153 / 955.351.421.53 95535142253 / 955.351.422.53 7L6615123Q / 7L6615149 / 7L6615123J / 7L6615123N
- ✓ Hole circle: 5x100 & 5x112
- ✓ Thickness: 8mm
- ✓ Centering 57.1->64.8
