VW Gearbox Mounting Bracket Cable Gearbox Golf MK1 Caddy G60 VR6 1,8T Engine Conversion Gearbox
- ✓ Golf 1, Caddy 14d, Scirocco Jetta 1 & 2
- ✓ 02A gearbox from G60 or VR6 engine
- ✓ Bearing 64mm
€86.43*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Gearbox mounting bracket kit, in order to install a control cable gearbox 02A/ for an easy and time savings conversion to VR6 or G60 engine into Golf MK1, Caddy 14d, Scirocco Jetta 1 & 2.
It is absolutely necessary in order to install an original gearbox 02A from G60 or VR6 engine, in Golf MK1 Caddy 14d, Scirocco Jetta 1 & 2!
The gearbox mounting brackets are for the bearings of the Golf MK1, with bearing outside diameter of 64mm.
Advantages:
- quick and easy conversion to VR6 /G60 engine and gearbox.
- reinforced equipment .
- top German quality product
- excellent corrosion protection. All parts are supplied galvanized.
- adapted to 100%
- screws are supplied
Delivery:
- 1x 02A gearbox mounting bracket kit for VW Golf MK1 Caddy G60
- mounting screws
- detailed installation instructions
- delivered with complete screw kit
Not suitable for the CDA gearbox.
For conversion to G60 and VR6 engine, we offer in our shop engine brackets, chain tensioners and other parts.
Login
8 May 2020 06:59
Tobias L
Pass genau und schneller Versand. Gerne wieder
9 August 2021 21:44
David H
El envío ha sido muy rápido, la comunicación con el vendedor muy clara,, artículo Epytec de muy buena calidad, recomendado 100%
7 March 2024 15:30
Olaf L
Alles Gut
5 September 2020 09:19
Achim F
5 Sterne
9 August 2017 09:15
2012tuningfreund
Sehr gut!!!
3 February 2019 14:32
frankieoettinger
Ok teile
12 February 2024 21:42
hotsteper88
SUPER ð
13 May 2020 12:44
Piotr K
Uchwyty wysokiej jakości i bardzo estetycznie wykonane. Pasują bardzo dobrze. Polecam.
21 January 2022 13:23
Giuseppe
Sehr gute Verarbeitung und schöne Optik! Endlich ist der Motor drin!
1 April 2024 17:41
Milorad D
Very good, I install it, and have no problem, recommned !
- I can't get the clutch cable to attach to the transmission mount, what do I have to do?
It can happen that the gearshift tower (no. 3 image) is next to the transmission mount. In this case, you will not get the clutch cable holder (no. 1 image) mounted correctly and the clutch cable (no. 2 image) will not be mounted either.
In this case, we can offer you the following solution.
With our counterholder for the clutch cable, you can avoid exactly this problem. In this case, you do not need to fit the small bracket for the clutch cable above (no. 1 image), but can simply use our counter bracket (click here). This is installed as shown in the picture:
As soon as the counterholder (click here) is fitted, you have created the necessary space to be able to fit the clutch cable correctly.
- In which position do I have to press in the bearings?
The position is always different due to the tolerances on the bodies. It is best to proceed as follows:
-Mount the engine and gearbox mount (without bearings).
-Hang the engine and gearbox in the vehicle so that everything fits perfectly.
-Mark the position where the bearings are to be pressed in.
-Press the bearings into place.
Because the bearings are eccentric, you can align the engine and gearbox perfectly.