VW Golf 4 Polo VW Polo 6R WRC 9N Bora Audi A3 TT brake system brake caliper adapter GT3 911 996 Turbo 334x32
- ✓ 334x32 1J0615301AA 1J0615302A Golf 4 / R32 brake disc
- ✓ 4-piston 996351429 / 996351430 Big Red
- ✓ front axle
€183.45*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter on Golf MK4 series for conversion to 911 GT3 and 996 turbo brake calipers (also called Big Red), combined with the original R32 brake discs from Golf 4 R32 ( 334x32, 5x100 PCD)
Suitable for the following vehicles:
- Audi A3 (8L)
- Audi TT (8N)
- VW Golf MK4
- VW Bora
- VW Beetle
- VW Polo (9N)
- VW Polo 6R WRC
- Seat Ibiza 6L
- Seat Leon 1M
A reference number and the EPYTEC logo is engraved on our caliper adapters. Thus, it is possible to register your purchase even for series vehicles, according §21 i.V.m. § 19/2 StVZO (German Road License Legislation).
Vorteile dieser Bremsanlage:
- high deceleration, also in conjunction with our rear axle braking system
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Required components:
- brake calipers Porsche 911 GT3 und 996 turbo,reference: left 996.351.429 / Brembo reference 20.7310.03 + right 996.351.430 / Brembo reference 20.7310.04
- brake pads: from original 911 T3 and 996 turbo calipers
- brake discs: Golf 4 R32 334x32mm , reference 1J0 615 301AA and 1J0 615 302 A
Delivery:
- 2x brake caliper adapters (see picture)
- high strength mounting screws
- material certificate
- stress analysis
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
26 February 2020 07:46
Friedrich S
Alles top
24 June 2023 20:14
Michael K
Top Qualität,passt genau.Würde ich sofort wieder kaufen
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 334x32
- ✓ 65mm centering
- ✓ 35mm height
- ✓ 5x100 bolt circle
- ✓ Plug & Play
- ✓ Seat Leon / Audi A3 / Audi TT quattro
- ✓ 1-2 degrees negative/positive
- ✓ 2mm thickness
- ✓ Suitable for Audi A3, VW Golf 4, Seat Leon
- ✓ Front axle right
- ✓ Audi A3 Sportback Q3 VW Golf 5 6 4-motion Passat 3c Skoda
- ✓ Free of registration
- ✓ Shortened switching path
- ✓ rust-free stainless steel
- ✓ OE number: 1J0711256
- ✓ 334x32
- ✓ 65mm centering
- ✓ 35mm height
- ✓ 334x32
- ✓ 65mm centering
- ✓ 35mm height
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
- ✓ 334x32
- ✓ 65mm centering
- ✓ 35mm height
- ✓ 334x32
- ✓ 65mm centering
- ✓ 35mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
