Track plate under brake discs change total height VW Golf and Audi models with 5x100 bolt circle 15mm brake conversion
- ✓ Hole circle: 5x100
- ✓ Thickness: 15mm
- ✓ Centering 57.1->67.8
€150.80*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
2x track plates, which are mounted under the brake disc, made of high-strength aluminum.
These are used to install brake discs from the Mercedes series, which have too great an overall height and a smaller center centering and would therefore rub against the wheel carrier. Our plates bring the brake disk 15 mm closer to the rim.
The track plates are perfect for VW Golf and Audi models with 5x100 bolt circle with 65mm brake disk centering on the wheel hub, in order to use brake disks with 5x100 bolt circle and 57.1mm hub bore, which have a large overall height and could not be used otherwise.
The matching brake calliper adapters for this track plate can be found in the matching accessories for this adapter plate
Due to the TÜV certificate (technical report) included in the scope of delivery, registration can be carried out via individual approval.
Technical data:
- Thickness of the plate: 15mm
- Bolt circle: 5x100
- Brake disk centering vehicle: 65mm
- Rim centering vehicle: 50mm
- Centering for new brake disc 57.1mm
Delivery:
- x high-strength aluminum plates 15mm for the complete VW and Audi series with 65mm brake disc centering on the wheel hub
- TÜV - certificate for registration
- Material certificate
Technical data:
Login
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems