VW Syncro T3 BUS 16 Inch Front Axle Audi Ate 57 Brake Caliper Adapter Brake 312x25
- ✓ 312x25 4B0615301A Audi A4 / A6 brake discs
- ✓ 1-piston 4A0615123A / 4A0615124A Audi 100 / A6 brake caliper
- ✓ front axle
£219.39*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
⚠️ Important Notice:
This item is produced exclusively upon request. As it is a made-to-order special production based on demand, there is no right of withdrawal pursuant to § 312g (2) No. 1 of the German Civil Code (BGB).
Therefore, returns or exchanges are excluded.
Brake caliper adapter on T3 bus Syncro ( 16 inch axle ) for conversion to internally vented 312x25 brake discs, combined with Audi A6 brake caliper.
Advantages:
- top deceleration
- the system no longer warms up and no more fading
- very cheap components. You can find second-hand caliper from 49.- € / new from 70.-€
- thanks to the material certificate supplied with the order, it is possible to register your purchase
- quick and easy assembly with the supplied mounting screws
Required components:
- brake discs: 312x25 mm Audi A4 Quattro, Audi A6, e.g. 4B0 615 301 A
- brake calipers: Audi 100/A6 C4 Girling/ ATE 57
- brake caliper mounting brackets from 288th brake system
- at least 16 inch rims
These adapters are designed for the T3 4WD / Syncro and 16-inch axle models. For the rear-wheel drive engines, you will find the corresponding adapters in our shop.
Delivery:
- 2x brake caliper adapters for 16-inch axle
- 2x spacer plates under the bracke discs, 3 mm
- high-strength mounting screws
- material certificate
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
1 April 2021 08:56
Philippe O
J'ai choisi ce kit pour un VW Syncro 16" comme indiqué sur votre site. Le délai d'expédition a été long. Le produit est facturé le double du prix de celui pour Syncro 14", pourquoi ? Rien ne justifie cela à mon avis. Emballage pas assez solide, il est arrivé détruit. Pas encore monté sur le véhicule donc pas encore d'avis sur l'installation.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
| Motor | Motorcode |
|---|---|
| 1.9 Syncro | 24|78PS(57KW) |
| 1.6 TD Syncro | 25|69PS(51KW) |
| 2.1 Syncro | 24|112PS(82KW) |
| 2.1 Syncro | 25|95PS(70KW) |
| 2.1 Syncro | 25|112PS(82KW) |
| 1.9 Syncro | 25|78PS(57KW) |
| 2.1 Syncro | 24|95PS(70KW) |
| 1.6 TD Syncro | 24|69PS(51KW) |
| Motor | Motorcode |
|---|---|
| 1.6 TD Syncro | 24|69PS(51KW) |
| 1.9 Syncro | 24|78PS(57KW) |
| 2.1 Syncro | 24|95PS(70KW) |
| 2.1 Syncro | 24|112PS(82KW) |
| Motor | Motorcode |
|---|---|
| 2.1 Syncro | 25|112PS(82KW) |
| 2.1 Syncro | 25|95PS(70KW) |
| 1.9 Syncro | 25|78PS(57KW) |
| 1.6 TD Syncro | 25|70PS(51KW) |
| Motor | Motorcode |
|---|---|
| 1.9 Syncro | 24|78PS(57KW) |
| 1.6 TD Syncro | 25|69PS(51KW) |
| 2.1 Syncro | 24|112PS(82KW) |
| 2.1 Syncro | 25|95PS(70KW) |
| 2.1 Syncro | 25|112PS(82KW) |
| 1.9 Syncro | 25|78PS(57KW) |
| 2.1 Syncro | 24|95PS(70KW) |
| 1.6 TD Syncro | 24|69PS(51KW) |
| Motor | Motorcode |
|---|---|
| 1.6 TD Syncro | 24|69PS(51KW) |
| 1.9 Syncro | 24|78PS(57KW) |
| 2.1 Syncro | 24|95PS(70KW) |
| 2.1 Syncro | 24|112PS(82KW) |
| Motor | Motorcode |
|---|---|
| 2.1 Syncro | 25|112PS(82KW) |
| 2.1 Syncro | 25|95PS(70KW) |
| 1.9 Syncro | 25|78PS(57KW) |
| 1.6 TD Syncro | 25|70PS(51KW) |
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ VW T3 BUS
- ✓ Length: 50cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ VW T2/ T3 Bus
- ✓ AFN1.9 TDI PD 116 HP engine, transverse installation
- ✓ simple engine conversion
- ✓ VW T2/T3 Bus
- ✓ 1.9l TDI (90PS) 1Z engines
- ✓ simple engine conversion
- ✓ VW T3 Bus/Syncro TDI engine conversion
- ✓ Golf 3 starter
- ✓ 0 001 125 012/013 (2.0 KW),0 986 017 460 (2.0 KW)
- ✓ gear adapter plate
- ✓ suitable for VW T3 BUS / box
- ✓ 012 Audi / VW 5-speed gearbox
- ✓ 280x12 7D0615601 VW BUS T4 brake disc
- ✓ 1-piston 7D0615424B VW BUS T4 brake caliper
- ✓ rear axle
- ✓ drive shaft adapter
- ✓ VW T3
- ✓ 012 Audi gearbox
- ✓
- ✓ Tie rod end M14x1.5
- ✓ VW, Audi, Golf 1, Golf 2, Golf 3, Corrado,...
- ✓ 100% perfect fit
- ✓ VW T3 bus
- ✓ 012 VW / Audi 5-speed
- ✓ simple engine conversion
- ✓ switching shaft adapter
- ✓ suitable for VW T3 Bus
- ✓ 012 Audi / VW 5-speed gearbox
- ✓ 268x10 7M0615601 VW Sharan 2.8 VR6 brake disc
- ✓ 1-piston 191615423 / 191615424 Girling 38 brake caliper
- ✓ rear axle
- ✓ 312x25 4B0615301A Audi A4 Quattro / Audi A6 brake disc
- ✓ 1-piston 4A0615123A / 4A0615124A Audi 100 / A6 C4 Girling / Ate57 brake caliper
- ✓ front axle
- ✓ 280x12 7D0 615 601 VW BUS T4 brake disc
- ✓ 1-piston 701615424 VW BUS T4 brake caliper
- ✓ rear axle
- ✓ 268x10 7M0615601 VW Sharan 2.8 VR6 brake disc
- ✓ 1-piston 191615423 / 191615424 Girling 38 brake caliper
- ✓ rear axle
- ✓ 300x22 8E0615601R A4 / S4 brake disc
- ✓ 4-piston 996352422 / 996352421 Porsche 996 brake caliper
- ✓ rear axle
- ✓ Engine mount conversion to hydraulic bearing
- ✓ VW T3 Bus, Audi 2.8L TDI
- ✓ less vibration