VW Golf MK5 MK6 MK7 Brake Caliper Adapter Brake System 360x32 365x34 Audi TT RS4 B5 B7 R8 8-piston Caliper
- ✓ 360x32 8D0615302B Audi RS4 B5 brake disc
- ✓ 8-piston 8E0615107 / 8E0615108 RS4 B7 / R8 brake caliper
- ✓ front axle
€221.96*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter on models Golf MK5, MK6 and MK7 for conversion to 8 piston brake caliper from R8, combined with Audi RS6 brake discs (360x32mm).
The adapters fit the following vehicles with steel steering knuckles:
- Audi A1 S1 quattro 8X1
- Audi A3 8P1
- Audi A3 Sportback 8PA
- Audi TT 8J3
- Seat Altea 5P1
- Seat Leon 5F1
- VW Caddy III MPV 2CB
- VW Caddy III Box 2CA
- VW Golf Plus 521
- VW Golf V1K1
- VW Golf V Variant 1K5
- VW Golf VI 5K1 517
- VW Golf VI Cabriolet 517
- VW Golf VI Variant AJ5
- VW Jetta IV 162
- VW Scirocco 137
- VW Touran 1T3
- VW Touran 5T1
Suitable for all vehicles listed that have a steel knuckle installed (not suitable for vehicles with aluminum knuckles)
It may be that steering angle limiters have to be installed for a complete steering angle, you can find these below in the matching accessories.
Advantages of this brake system:
- high deceleration, also in conjunction with our rear axle braking system
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Required components:
- brake caliper: Audi R8 8 piston, left reference: 8E0615107 ; right reference: 8E0615108
- brake disc: Audi RS4 B5 360x32 mm reference : 8D0615302B / or RS4 B7 brake disc 365x34mm reference 8E0615301AB
- (when the 365x24mm disc is installed, it is necessary to place washers on the brake caliper mount so that the brake disc size is compensated. In this case we recommend our Epytec article with the No. 707-BU
Delivery:
- 2x brake caliper adapters for VW Golf MK5, MK6
- 2x corresponding centric rings
- high-strength mounting screws
- Matching washers for the 365 disc
- material certificate
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
24 January 2019 11:58
Patrick S
Top Ware
25 June 2019 06:33
Simionescu A
Super quality Very fast delivery Well done Epytec!
9 July 2019 09:48
Simionescu A
Super well product Happy with the customer care Epytec is the best!!!
9 July 2019 22:31
Simionescu A
Best products Perfect finishing Fast delivery Epytec is the best!
13 January 2019 19:40
Patrick S
Top verarbeitung
19 March 2019 12:00
Cristian P
alles ok
6 June 2019 10:20
Illi D
die teile sind perfekt verarbeitet und passgenau, sind sehr zufrieden, danke. tuning hangar51
23 January 2019 23:10
Jörg L
Der Adapter hat gut gepasst und daher würde ich in weiterempfehlen ! Ich war sehr skeptisch über den Adapter und würde eines besseren belehrt und es sieht einfach super aus!
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ 310x22 1K0615601N Golf 5 R brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ 310x22 1K0615601N Golf 5 R brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Length: 63cm
- ✓ M10x1 outside 45° curved
- ✓ M10x1 inside straight
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 360x32
- ✓ 68mm centering
- ✓ 47mm height
- ✓ 360x32
- ✓ 68mm centering
- ✓ 47mm height
- ✓ 345x22 1664230312 original brake disc
- ✓ 4-piston 996352421 / 996352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ 365x34
- ✓ 68mm centering
- ✓ 46.5mm height
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
