Which brake pads should be used?

The original brake pads from the brake caliper, which is required for our conversion kit, must always be used.

Can I use other brake calipers as indicated in the required components?

No, unfortunately that is not possible, the reason being that all brake calipers have different height and depth measurements. If another brake disc is installed, the brake caliper would either not fit the adapter at all or not run centrally to the brake disc. If you want to install a different brake caliper, we also have an option for you. You can have a custom-made product manufactured, check out the following link for more information:

Can I also use other discs as specified in the required components?

No, unfortunately that is not possible. The reason is simply that all brake calipers have different height and depth measurements. If a different brake disc is installed, the brake caliper would either not fit on the adapter at all or would not be centered with the brake disc. However, if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product produced, have a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

My brake caliper is not exactly centered over the brake disc - what should I do?

If your brake caliper is not exactly centered over the brake disc, in most cases it is not a problem. Depending on the vehicle, model year, and mileage, axle tolerances can occur – and this even in newer vehicles.The most important thing is:👉 The brake caliper must have sufficient clearance on the left and right to the brake disc so that nothing rubs or permanently touches it.Many brake calipers also have locking bolts. It may happen that:there is very little clearance on one side or the bolt lightly toucheswhile on the other side there is more playThis is generally not critical.🔧 This is how you proceed:Install brake pads:First check if the brake pads can be inserted cleanly and without resistance on both sides.If everything fits:If installation is possible without problems, you can simply gently push back the locking bolts – this usually resolves the issue.If it jams:If the brake pads cannot be installed, or only with difficulty, on one side, action is required.In this case, you can:slightly shim the adapter with suitable bushings to adjust the brake caliperor – depending on the situation – slightly mill the adapter so that the brake caliper is correctly centered again👉 The goal is always that the brake caliper is evenly aligned with the brake disc and the brake pads are seated freely and cleanly.

VW Golf MK3 Corrado Passat Syncro Adapter Rear R32 S3 V6 Brake Caliper Adsapter 310x22mm Phaeton Brake Disc

✓ 310x22 3D0615601D VW Phaeton brake disc
✓ 1-piston 8N0615423C / 8N0615424C VW Golf R32 V6 / S3 brake caliper
✓ rear axle

£173.90*

Available

Product number: 503

Delivery by Tuesday, 14.07.2026 if you order within the next 8 Hours.

Express shopping
Save your data and settings
Order overview and shipping information
Manage your newsletter subscription
19 Jahre Expertenwissen

Product information "VW Golf MK3 Corrado Passat Syncro Adapter Rear R32 S3 V6 Brake Caliper Adsapter 310x22mm Phaeton Brake Disc"

Brake caliper adapter, rear axle, on models Golf MK3 Syncro, for conversion to the brake calipers of Golf MK4 V6/R32 Audi S3 8L .YoC 99, combined with the VW Phaeton 310x22mm brake discs.

Adapters are suitable for the following VW and Seat models with Syncro axles:

Golf MK3 Syncro
Corrado Syncro
Passat 35i Syncro

Vorteile dieser Bremsanlage:

top deceleration, without comparison with conventional rear brake discs
better fading thanks to internally ventilated discs
better performance
thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles

Required components

brake caliper: VW Golf R32 V6 or S3, left VW reference 8N0615423C, right VW reference 8N0615424C
brake caliper mounting bracket: reference 8N0 615 425 B
brake caliper: VW Phaeton 310x22mm, VW reference 3D0 615 601 D
modification of the disc circle diameter to 5x100 (possibility of making it directly from EPYTEC)

Delivery:

2x brake caliper adapters for Golf 3, Passat, Corrado Syncro
high-strength mounting screws
installation instructions
centering rings

We provide a TÜV certificate with this adapter. This means that the TÜV inspector can easily register the adapter.

Tips, information and advice:

To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Brake caliper hole spacing: 149

Hole spacing steering knuckle: 90

Manufacturer: Epytec

Mounting location: rear!

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

email address

password

or Register with...

No reviews found. Share your insights with others.

Motor	Motorcode
1.8 Syncro	1H1\|90PS(66KW)
1.9 TDI Syncro	1H1\|90PS(66KW)
2.0 Syncro	1H1\|115PS(85KW)
2.9 VR6 Syncro	1H1\|190PS(140KW)

Motor	Motorcode
1.8 G60 Syncro	35I\|160PS(118KW)
1.8 G60 Syncro	3A2\|160PS(118KW)
2.0 Syncro	3A2\|115PS(85KW)
2.0 Syncro	35I\|115PS(85KW)

Motor	Motorcode
1.8 Syncro	1G2\|90PS(66KW)
1.8 Syncro	19E\|90PS(66KW)
1.8 Syncro	1G2\|98PS(72KW)
1.8 Syncro	165\|98PS(72KW)
1.8 Syncro	165\|90PS(66KW)
1.8 Syncro	19E\|98PS(72KW)

Motor	Motorcode
1.8 Syncro	1H1\|90PS(66KW)
1.9 TDI Syncro	1H1\|90PS(66KW)
2.0 Syncro	1H1\|115PS(85KW)
2.9 VR6 Syncro	1H1\|190PS(140KW)

Motor	Motorcode
1.8 G60 Syncro	35I\|160PS(118KW)
1.8 G60 Syncro	3A2\|160PS(118KW)
2.0 Syncro	3A2\|115PS(85KW)
2.0 Syncro	35I\|115PS(85KW)

Motor	Motorcode
1.8 Syncro	1G2\|90PS(66KW)
1.8 Syncro	19E\|90PS(66KW)
1.8 Syncro	1G2\|98PS(72KW)
1.8 Syncro	165\|98PS(72KW)
1.8 Syncro	165\|90PS(66KW)
1.8 Syncro	19E\|98PS(72KW)

VW Golf 3 Brake Caliper Adapter Porsche Vr6 GTI Passat 35 16V ZR17 ZL17 Touareg BM5 Front axle Brake System 334x32

✓ 334x32 1J0615301AA 1J0615302 A Golf 4 brake disc
✓ 6-piston 7L6615123T / 7L6615124T Porsche Cayenne/ VW Tuareg brake caliper
✓ front axle

£113.66*

£105.70

Product number: 284

Golf MK2 Corrado Passat Conversion Gas Pedal Accelerator Adapter Trottle Control for Golf MK4 DBW R32 V6 TDI 6Q1 723 503 K Accelerator Cable

✓ For Golf 2 Corrado
✓ On Golf 4 Accelerator Pedal
✓ OE:6Q1723503K

£59.11*

£54.97

Product number: 863

Steel Braided Brake Line VW Golf MK1 MK2 MK3 G60 Passat Scirocco Polo Corrado Jetta Brembo Porsche TTRS Brake Conversion

✓ Length: 57cm
✓ M10x1 curved on the outside
✓ M10x1 straight on the inside

£83.10*

£77.28

Product number: SF110

Adapter Nipple Hose Conversion Hydraulic Clutch VW Golf 1 2 3 Slave Cylinder Golf 4 Audi A3 Seat Leon 02a 02j 02m Gearbox

✓ Hydraulic clutch slave cylinder
✓ Golf 1, 2, 3, Audi A3, Seat Leon
✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission

£9.54*

£8.87

Product number: 952

6-speed gearbox holder 02M for Golf Passat Corrado G60 16V Vr6 gearbox holder DXW DRP DQB

✓ gearbox holder
✓ Golf 2, Golf 3, Passat, Corrado, Jetta, Vento
✓ 02m / R32 V6 1.8T 6-speed gearbox DRP DQB DXW

£73.55*

£68.40

Product number: 282

Steel Braided Brake Line Steel Flexible Brake Hose front Axle VW Golf MK4 R32 Audi A3 S3 A1 Ibiza Pol

✓ Length: 57cm
✓ M10x1 curved on the outside
✓ M10x1 straight on the inside

£82.78*

£76.99

Product number: SF100

Lightened Flywheel Golf Passat Corrado G60 1 2 3 GTI 16V KR PL Flywheel light steel

✓ G60 GTI 16V engines
✓ 228 clutch
✓ lightens 4.1 kg

£144.64*

£134.52

Product number: 627

VW Golf MK2 Jetta Corrado Conversion Kit Golf MK4 Audi A3 TT Engine Hydraulic Clutch

✓ Hydraulic clutch complete conversion kit
✓ Golf 2, 3, Corrado, Jetta, Passat 35i
✓ Engine conversion from the Golf 4, original pedals are retained

£184.05*

£171.17

Product number: 918-BA

Clutch Master Cylinder Passat 35I Golf 2 GTI G60 VW Corrado Master Cylinder Conversion to Hydraulic Clutch

✓ Passat 35I Golf 2 GTI G60
✓ OE NR: 357 721 401
✓ Golf1 Caddy conversion

£21.81*

£20.28

Product number: 130

Bolt circle adapter VW 4x100 on 5x112 Audi 20mm Wheel plates

✓ 4x100 to 5x112
✓ 20mm per side
✓ 57.1 -> 57.1 centering

£56.20*

£52.27

Product number: 246

Wheel Spacer PCD Adapter VW 4x100 to 4x108 Audi 20mm 1tlg. Track Plate

✓ 4x100 to 4x108
✓ 20mm per side
✓ 57.1 -> 57.1 centering

£45.66*

£42.46

Product number: 719

VW Golf MK1 MK2 MK3 Mounting Bracket for 16V 1.8T VR6 Conversion Clutch Cable G60 Gearbox Bracket

✓ VW Golf 2, Golf 3 Passat, Corrado, Jetta, Vento
✓ 02a 02j 5 gear
✓ 1.8T 16V G60 conversion

£28.09*

£26.12

Product number: 116

Brake master cylinder VW Golf 1 2 3 Scirocco Corrado 22.2 GTI G60 VR6 1.8T 16V Brake - With brake fluid reservoir: Yes

£60.10*

£55.89

Product number: 555-MB

Reinforced Clutch Release Lever 02A 02A141709A Golf Corrado Vr6 16V 1 2 3 4

✓ Release lever reinforced
✓ G60, VR6, 2L 16V, GTI, TDI, Corrado, Golf 2/ 3, Passat
✓ 02A/02J gearbox

£55.25*

£51.38

Product number: 720

VW Golf MK2 MK 3 G60 VR6 Conversion Kit Gearbox Clutch Cable Bearing Mechanical Clutch 1.8T 02A Gearbox

✓ Complete KIT
✓ length 1.34m
✓ OE NR: C357721335E

£151.49*

£140.89

Product number: 112

Golf Corrado VR6 16V Brake calipers adapter R32 S3 TT 1,8T 312x25 334x32

✓ 312x25 1J0615301AA 1J0615302A S3 / R32 brake disc
✓ 1-piston 1J0615123E / 1J0615124E S3 / R32 brake caliper
✓ front axle

£33.15*

£30.83

Product number: 575

6 Speed Manual Gearbox Conversion Kit 02M 4motion VR6 R32 Golf MK1 2 3 4 Turbo

✓ 02M transmission conversion to FWD
✓ simple conversion
✓ Golf 1, Golf 2, 3, Golf 4 series

£95.44*

£88.76

Product number: 698

VW Golf 1 2 3 Corrado Jetta Vento Hydraulic System Line Conversion 02M 02Q 5-speed 02A 02J Gearbox

✓ Hydraulic line
✓ Golf 1, 2, 3, Corrado, Vento, Scirocco, Caddy
✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission

£65.81*

£61.20

Product number: SF108