VW Golf MK 2 3 Corrado Passat Syncro Brake Caliper Adapter Rear R32 S3 V6 Brake Caliper 280mm G60 Brake Disc
- ✓ 280x22 535615301 Golf 2 G60 brake disc
- ✓ 1-piston 8N0615423C / 8N0615424C R32 / S3 brake caliper
- ✓ rear axle
£182.76*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, rear axle, on models Golf MK3 Corrado Syncro, for conversion to rear brake caliper from Golf MK4 V6/R32 Audi S3 8L YoC.99, combined with the brake discs, front, 280mm, G60.
Suitable for the following models of VW and Seat, with Syncro axles:
- Golf MK2 Syncro
- Golf MK3 Syncro
- Corrado Syncro
- Passat 35i Syncro
Advantages of this brake system:
- top deceleration, without comparison with conventional brake discs
- better fading thanks to the internally vented discs
- better performance
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
For the front axle, we have in our shop brake caliper adapters for conversion to Porsche brake system, combined with R32 brake discs . Visit our shop.
Required components:
- brake caliper: VW Golf R32 V6 or S3 VW , reference left 8N0615423C right 8N0615424C
- brake caliper mounting bracket , reference 8N0615425B
- brake disc: Golf 2 G60 VW , reference 535 615 301 / important: total height 39,5mm
Delivery:
- 2x brake caliper adapters
- complete screw kit
- material certificate
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
22 July 2020 06:15
Marc Patrick B
Hat alles super gepasst
14 January 2020 19:33
rossgo1313
great product.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
| Motor | Motorcode |
|---|---|
| 1.8i Cat Syncro | 19E|90PS(66KW) |
| 1.8 Syncro | 1G1|98PS(72KW) |
| 1.8 GTI G60 Syncro | 1G1|160PS(118KW) |
| 1.8 Syncro | 1G1|90PS(66KW) |
| 1.8 GTI G60 Syncro | 19E|160PS(118KW) |
| 1.8i Cat Syncro | 1G1|90PS(66KW) |
| 1.8 Syncro | 19E|90PS(66KW) |
| 1.8 Syncro | 19E|98PS(72KW) |
| Motor | Motorcode |
|---|---|
| 1.8 G60 Syncro | 3A2|160PS(118KW) |
| 1.8 G60 Syncro | 35I|160PS(118KW) |
| 2.0 Syncro | 3A2|115PS(85KW) |
| 2.0 Syncro | 35I|115PS(85KW) |
| Motor | Motorcode |
|---|---|
| 1.8 Syncro | 1G2|90PS(66KW) |
| 1.8 Syncro | 165|98PS(72KW) |
| 1.8 Syncro | 19E|90PS(66KW) |
| 1.8 Syncro | 165|90PS(66KW) |
| 1.8 Syncro | 19E|98PS(72KW) |
| 1.8 Syncro | 1G2|98PS(72KW) |
| Motor | Motorcode |
|---|---|
| 1.9 TDI Syncro | 1H1|90PS(66KW) |
| 1.8 Syncro | 1H1|90PS(66KW) |
| 2.0 Syncro | 1H1|115PS(85KW) |
| 2.9 VR6 Syncro | 1H1|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 1.8i Cat Syncro | 19E|90PS(66KW) |
| 1.8 Syncro | 1G1|98PS(72KW) |
| 1.8 GTI G60 Syncro | 1G1|160PS(118KW) |
| 1.8 Syncro | 1G1|90PS(66KW) |
| 1.8 GTI G60 Syncro | 19E|160PS(118KW) |
| 1.8i Cat Syncro | 1G1|90PS(66KW) |
| 1.8 Syncro | 19E|90PS(66KW) |
| 1.8 Syncro | 19E|98PS(72KW) |
| Motor | Motorcode |
|---|---|
| 1.8 G60 Syncro | 3A2|160PS(118KW) |
| 1.8 G60 Syncro | 35I|160PS(118KW) |
| 2.0 Syncro | 3A2|115PS(85KW) |
| 2.0 Syncro | 35I|115PS(85KW) |
| Motor | Motorcode |
|---|---|
| 1.8 Syncro | 1G2|90PS(66KW) |
| 1.8 Syncro | 165|98PS(72KW) |
| 1.8 Syncro | 19E|90PS(66KW) |
| 1.8 Syncro | 165|90PS(66KW) |
| 1.8 Syncro | 19E|98PS(72KW) |
| 1.8 Syncro | 1G2|98PS(72KW) |
| Motor | Motorcode |
|---|---|
| 1.9 TDI Syncro | 1H1|90PS(66KW) |
| 1.8 Syncro | 1H1|90PS(66KW) |
| 2.0 Syncro | 1H1|115PS(85KW) |
| 2.9 VR6 Syncro | 1H1|190PS(140KW) |
- ✓ Length: 23cm
- ✓ M12x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 280x22
- ✓ 65mm centering
- ✓ 39.5mm height
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 280x22
- ✓ 65mm centering
- ✓ 40mm height
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Brake force regulator Infinitely variable
- ✓ Perfectly adjustable braking effect
- ✓ suitable for all vehicles
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ 280x22
- ✓ 65mm centering
- ✓ 39.5mm height
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints VR6 or G60
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints VR6 or G60 coarse teeth
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints G60 or VR6 fine toothing