VW Gearbox Mounting Bracket Cable Gear Golf 1 Caddy 16V ABF G60 1,8T CDA CTM DPA Engine Conversion Gearbox
- ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta
- ✓ CDA CTM DPA gearbox
- ✓ 1.8T, VR6 16V TDI
€136.42*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Gearbox bracket mounting kit, in order to install a CDA CTM DPA gearbox (from Golf MK3 16 V) for conversion to 16V G60 or 1,8T engine in Golf MK1, Caddy 14d, Scirocco Jetta 1 & 2.
Essential for conversion to G60 16V TDI and 1.8T engine in Golf MK1.
The gearbox mounting brackets are for the bearings of the Golf MK1, with bearing outside diameter of 64mm.
Advantages:
- quick and easy conversion to the VR6 /G60 engine and gearbox
- through reinforced equipment and professional welding process TÜV approval possible
- top german quality product
- excellent corrosion protection. All parts are supplied galvanized.
- adapted to 100%
- screws are supplied
Scope of Delivery:
- 2x CDA CTM DPA gearbox mounting brackets for VW Golf MK1 Caddy G60
- mounting screws
- detailed installation instructions
- materoal certificate
For conversion to G60 and 16V engine, we offer in our shop engine brackets, chain tensioners and other parts.
Only suitable for CDA CTM DPA gearbox. We have other mounting bracket in our shop for 02A 02J and 02M gearbox.
Login
21 May 2019 08:29
Jean F
Top
31 March 2024 12:20
Marcel W
Passt sehr gut und ist weiter zu empfehlen .
6 September 2018 22:01
wolfgan0711
Passt genau. Sehr schneller Versand. Reibungslose Kommunikation. Gerne wieder.
9 June 2019 20:48
Aksana C
Die Waren haben super Qualität. Alles wurde rechtzeitig und super good verpackt geliefert. Nur weiter zu empfehlen.)))
13 December 2019 13:29
Rúben P
Ótimos produto, qualidade de construção de excelência. O apoio de caixa tem o suporte para o cabo de embreagem, esse suporte não funciona com qualquer cabo.
13 December 2019 13:32
Rúben P
Excelentes, com medidas corretas, chegar e aplicar diretamente. Apenas o apoio da caixa de velocidades que tem o apoio extra para o cabo, de salientar que não funciona com qualquer cabo de embreagem.
22 May 2021 13:23
Andre H
Der Getriebehalter passt wie angegossen, die Verarbeitung ist auch sehr gut. Würde ihn wieder kaufen, bin rundum zufrieden. Klare Kauf Empfehlung.
26 November 2016 21:05
geemanvw
All good, received in great condition! Nice one!
31 March 2024 10:37
Marcel W
Passt sehr gut und ist weiter zu empfehlen .
13 June 2017 09:31
spati1000
Gerne wieder Top Lieferzeit
- I can't get the clutch cable to attach to the transmission mount, what do I have to do?
It can happen that the gearshift tower (no. 3 image) is next to the transmission mount. In this case, you will not get the clutch cable holder (no. 1 image) mounted correctly and the clutch cable (no. 2 image) will not be mounted either.
In this case, we can offer you the following solution.
With our counterholder for the clutch cable, you can avoid exactly this problem. In this case, you do not need to fit the small bracket for the clutch cable above (no. 1 image), but can simply use our counter bracket (click here). This is installed as shown in the picture:
As soon as the counterholder (click here) is fitted, you have created the necessary space to be able to fit the clutch cable correctly.
- In which position do I have to press in the bearings?
The position is always different due to the tolerances on the bodies. It is best to proceed as follows:
-Mount the engine and gearbox mount (without bearings).
-Hang the engine and gearbox in the vehicle so that everything fits perfectly.
-Mark the position where the bearings are to be pressed in.
-Press the bearings into place.
Because the bearings are eccentric, you can align the engine and gearbox perfectly.