Steel Braided Brake Line VW T3 Bus Porsche Brembo Brake COnversion
- ✓ Length: 43cm
- ✓ M10x1 straight outside
- ✓ M10x1 straight inside
£155.75*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
⚠️ Important Notice:
This item is produced exclusively upon request. As it is a made-to-order special production based on demand, there is no right of withdrawal pursuant to § 312g (2) No. 1 of the German Civil Code (BGB).
Therefore, returns or exchanges are excluded.
Steel braided brake line / steel flexible brake hoses, including material certificate, for conversion to larger brake system e.g. to Girling 38-57 brake caliper, on VW T3 Bus models.
Suitable for the following models, rear axle:
- VW T3 bus
- VW T3 boxbody
Advantages compared to original brake lines:
- no loss of pressure when braking. Exact pressure point
- easy assembly. The original line is simply replaced by the braided steel line
- no swelling as with rubber lines
- cost savings, because the braided steel lines do not need to be changed every 3 or 5 years
- shorter braking
- protection against the rodents
- incl. parts certificate for easy registration
- great optics
Technical data:
- length: 80cm
- connection 1 M10x1 external thread straight
- connection 2 M10x1 externa thread straight
- 90° flanging our fittings are so-called hermaphrodites, which means that every connection fits regardless of whether concave or convex
Delivery:
- 2x steel braided brake lines / steel flexible brake hoses for VW T3 bus, VW T3 boxbody, usw.
- material certificate
We also manufacture according to desired dimensions. With our steel braided lines configurator (click here), you can configure your steel braided brake line, according to your wishes. (Length, color and connections)
Login
- Does the steel braided line also fit other vehicles?
Yes – basically the braided steel line can also fit many other vehicles if the connection data matches. In practice, many manufacturers use very similar thread sizes for brake line fittings, so using them across different models is often possible.
What really matters
To ensure the line fits securely and tightly, you need to match three main points:
Thread size / connection
The key factor is what thread your vehicle has at the connection points (e.g., at the fixed line connection or brake caliper).
This thread size must match the fittings of the line.
Sealing surface (concave or convex)
Often, the problem is not the thread, but the sealing shape on the counterpart:
concave (valley) or
convex (hill)
Our fittings are so-called “hybrid” connections. This means: Each connection is designed to reliably seal with both concave and convex sealing surfaces. This makes the line significantly more versatile.
Length and routing
You need to determine the required length suitable for your vehicle (ideally as described above: fully extend, simulate routing, check steering).
Only if the line is long enough and can be routed cleanly is it truly suitable.
How to quickly check if it fits
Determine the thread size on the vehicle (and compare it with the data of the line)
Measure the line length
Check the technical data in the product description – there you will find all the details about the line and the connections.
- Two lens gaskets were supplied with the Steelflex lines. Where exactly are these installed?
The 2 lens seals are not automatically always installed, but only when they are needed to compensate for the sealing cone on the respective counterpart. Background: Depending on the vehicle/connection, there are different flaring or sealing shapes – and that's exactly why the lenses are always provided as a precaution.
What are the lens seals for?
They serve as a compensating piece when the cone on the connection (counterpart) does not perfectly match the steel braided hose. This ensures that the connection seals cleanly.
Where are they used?
If needed, the lens seals are placed directly into the connection with internal thread – that is, into the “female” fitting on the vehicle/distributor/brake caliper, before you screw in the hose.
The hose presses the lens into its seat when tightened, thus creating the seal.When do you need them – and when not?
F flare (DIN/ISO cone, usually fits):
→ Lens seals are not needed.
The hose usually seals directly over the matching cone here.E flare:
→ Lens seals must be used.
Simply place it into the internal thread, then screw in the hose and tighten as usual.
Installation note
The installation direction does not matter – you can install the lens either way, it makes no difference.
| Motor | Motorcode |
|---|---|
| 1.6 D | 24|50PS(37KW) |
| 1.7 D | 24|57PS(42KW) |
| 1.9 Syncro | 24|78PS(57KW) |
| 1.6 TD | 24|70PS(51KW) |
| 2.0 | 24|69PS(51KW) |
| 1.9 | 24|78PS(57KW) |
| 2.1i | 24|92PS(68KW) |
| 2.1 | 24|95PS(70KW) |
| 1.6 TD Syncro | 24|69PS(51KW) |
| 1.9 | 24|83PS(61KW) |
| 2.1 Syncro | 24|95PS(70KW) |
| 1.9 | 24|60PS(44KW) |
| 2.1 Syncro | 24|112PS(82KW) |
| 2.1 | 24|112PS(82KW) |
| Motor | Motorcode |
|---|---|
| 1.6 TD Syncro | 25|70PS(51KW) |
| 1.6 TD | 25|70PS(51KW) |
| 2.0 | 25|70PS(51KW) |
| 2.1 | 25|95PS(70KW) |
| 1.6 D | 25|50PS(37KW) |
| 1.9 Syncro | 25|78PS(57KW) |
| 1.9 | 25|83PS(61KW) |
| 1.9 | 25|78PS(57KW) |
| 2.1 | 25|112PS(82KW) |
| 2.1 Syncro | 25|112PS(82KW) |
| 1.9 | 25|90PS(66KW) |
| 2.1 Cat | 25|95PS(70KW) |
| 2.1i | 25|92PS(68KW) |
| 1.7 D | 25|57PS(42KW) |
| 1.9 | 25|60PS(44KW) |
| 2.1 Syncro | 25|95PS(70KW) |
| 1.6 | 25|50PS(37KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 26|50PS(37KW) |
| 1.6 | 21|50PS(37KW) |
| Motor | Motorcode |
|---|---|
| 1.6 D | 24|50PS(37KW) |
| 1.7 D | 24|57PS(42KW) |
| 1.9 Syncro | 24|78PS(57KW) |
| 1.6 TD | 24|70PS(51KW) |
| 2.0 | 24|69PS(51KW) |
| 1.9 | 24|78PS(57KW) |
| 2.1i | 24|92PS(68KW) |
| 2.1 | 24|95PS(70KW) |
| 1.6 TD Syncro | 24|69PS(51KW) |
| 1.9 | 24|83PS(61KW) |
| 2.1 Syncro | 24|95PS(70KW) |
| 1.9 | 24|60PS(44KW) |
| 2.1 Syncro | 24|112PS(82KW) |
| 2.1 | 24|112PS(82KW) |
| Motor | Motorcode |
|---|---|
| 1.6 TD Syncro | 25|70PS(51KW) |
| 1.6 TD | 25|70PS(51KW) |
| 2.0 | 25|70PS(51KW) |
| 2.1 | 25|95PS(70KW) |
| 1.6 D | 25|50PS(37KW) |
| 1.9 Syncro | 25|78PS(57KW) |
| 1.9 | 25|83PS(61KW) |
| 1.9 | 25|78PS(57KW) |
| 2.1 | 25|112PS(82KW) |
| 2.1 Syncro | 25|112PS(82KW) |
| 1.9 | 25|90PS(66KW) |
| 2.1 Cat | 25|95PS(70KW) |
| 2.1i | 25|92PS(68KW) |
| 1.7 D | 25|57PS(42KW) |
| 1.9 | 25|60PS(44KW) |
| 2.1 Syncro | 25|95PS(70KW) |
| 1.6 | 25|50PS(37KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 26|50PS(37KW) |
| 1.6 | 21|50PS(37KW) |
- ✓ 312x28 WD00604 Mercedes S-Class brake disc
- ✓ 4-piston 996351426 / 996351425 Porsche Boxer S brake caliper
- ✓ front axle
- ✓ 268x10 7M0615601 VW Sharan 2.8 VR6 brake disc
- ✓ 1-piston 191615423 / 191615424 Girling 38 brake caliper
- ✓ rear axle
- ✓ VW T3 Bus/Syncro TDI engine conversion
- ✓ Golf 3 starter
- ✓ 0 001 125 012/013 (2.0 KW),0 986 017 460 (2.0 KW)
- ✓ VW T2/ T3 Bus
- ✓ AFN1.9 TDI PD 116 HP engine, transverse installation
- ✓ simple engine conversion
- ✓ Bore 7mm
- ✓ 90° bent
- ✓ for welding/screwing
- ✓ Length: 50cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ VW T2/T3 Bus
- ✓ 1.9l TDI (90PS) 1Z engines
- ✓ simple engine conversion
- ✓ gear adapter plate
- ✓ suitable for VW T3 BUS / box
- ✓ 012 Audi / VW 5-speed gearbox
- ✓ 280x12 7D0615601 VW BUS T4 brake disc
- ✓ 1-piston 7D0615424B VW BUS T4 brake caliper
- ✓ rear axle
- ✓ Tie rod end M14x1.5
- ✓ VW, Audi, Golf 1, Golf 2, Golf 3, Corrado,...
- ✓ 100% perfect fit
- ✓ 268x10 7M0615601 VW Sharan 2.8 VR6 brake disc
- ✓ 1-piston 191615423 / 191615424 Girling 38 brake caliper
- ✓ rear axle
- ✓ 312x25 4B0615301A Audi A4 quattro / Audi A6 brake disc
- ✓ 1-piston 4A0615123A / 4A0615124A Audi 100 / A6 C4 Girling / ATE 57 brake caliper
- ✓ front axle
- ✓ 288x25 4A0 615 301 Audi A4 Quattro / Audi A6 brake disc
- ✓ 1-piston Girling / ATE 57 4A0615123A / 4A0615124A Audi 100 /A6 brake caliper
- ✓ front axle
- ✓ drive shaft adapter
- ✓ VW T3
- ✓ 012 Audi gearbox
- ✓
- ✓ 280x12 7D0 615 601 VW BUS T4 brake disc
- ✓ 1-piston 701615424 VW BUS T4 brake caliper
- ✓ rear axle
- ✓ VW T3 bus
- ✓ 012 VW / Audi 5-speed
- ✓ simple engine conversion
