Spacer PCD Adapter 5x100 to 5x112 5x120 5x130 Porsche Mercedes Audi BMW Rims 25mm
- ✓ 5x100 to 5x112 / 5x120 / 5x130
- ✓ 25mm per side
- ✓ 57.1 ->57.1 centering
€158.92*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
High-strength spacer / PCD adapter suitable for Audi, VW, Seat, Skoda with 5x100 PCD and a hub centering dimension of 57,10mm at the wheel hub.
3 different PCD are on the plates:
- 5x112
- 5x120
- 5x130
Thanks to these spacers / adapters, all Audi, Mercedes, BMW and Porsche rims can be installed. The major advantage is that at each change of rims, you do not need to change the adapter / spacer. You can thus drive with Porsche rims in summer and BMW rims in winter. At each change of rims, you do not need to install a new adapter plate: Buy just once, and change several times, as good as it seems to you.
In the installation instructions, you see how the whole thing is mounted. (click here)
Technical data
- enlargement per wheel: 25mm
- enlargement per axle: 50mm
- hub centric inside VW: 57,10 mm
- hub centric outisde: 57,10 mm (can also be changed as desired with centric rings)
- thread in adapter plate for wheel bolts: M14 x 1,5
The adapter plates are made of high-strength aluminum and thanks to the material certificate delivered with the order, it is possible to register your unit purchase even for series vehicles. All screws supplied are also high-strength (10.9).
Delivery:
- 2x spacers / adapter plates for one axle
- high-strength mounting screws (fine thread M14x1,5) on wheel hub 10.9
- TÜV - certificate for registration
- Installation instructions
This offer is only for one axle. For complete equipment of your vehicle, please order 2 times.
The article is also available with a thickness of 20mm. This allows you to compose the kit with the required thickness.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
12 April 2023 10:39
sch_357051
Immer wieder gerne!
18 June 2024 15:52
wheel_clean_tec
Hat Super geklappt :) immer wieder gerne :)
- How often do I have to pay the express surcharge if I have several products in one order or place several orders?
You only have to pay the express surcharge once per order. However, if you complete the order and place a new order, an express surcharge will apply again. The express surcharge therefore applies per order, not per product.
- With which torque are our Epytec bolt circle adapters screwed tight?
To attach the bolt circle adapters to the wheel hub, the same torque is used as original, this is usually between 120 and 140NM.
If you are not sure, it must be asked at the vehicle manufacturer.
The rim is always attached to the bolt circle adapter with the torque that the rim manufacturer specifies. There is a data sheet for each rim, which specifies the tightening torque.
If the data sheet is no longer available, the values must be requested from the rim manufacturer.