Gesucht nach VW | Jetta I | 1.8 | 16
- ✓ for front axle: Golf MK1, Golf MK1 Cabrio, Caddy 14d, Jetta 1, Scirocco
- ✓ brake caliper: Girling/Lucas 54 G60
- ✓ brake disc: G60 280x22mm , reference 535615301
Braking force regulator for conversion of brake disc system on Golf 1.For the installation of Golf 2/3 G60 V16 brake disc system on rear axle of the above mentioned vehicle.
- ✓ for Golf 1 series, e.g. Caddy 14d Corrado Scirocco Jetta
- ✓ Engine: Basis Golf 4 Audi A3 etc.
- ✓ Gearbox: 5-speed 02A / 02J based on Golf 3 and 4
High resistant rubber bearing kit for engine and gearbox.For installation on Golf 1. Perfect for motor conversion on VR6 or V16 engine.
- ✓ nipple adapter for conversion VW Golf MK1 MK2 MK3 Corrado, Vento, Scirocco, Caddy, to hydraulic line/cable
- ✓ setting / adjust gauge to adjust the 4 and 5 speed 020 gearbox on VAG Golf MK1 MK2 MK3 models, gear shift linkage
- ✓ for Golf MK2 and MK3 for exeample Corrado Jetta Passat
- ✓ conversion to mechanical clutch
- ✓ large master brake cylinder / main brake cylinder, ideal on all models Golf MK1 Caddy Scirrocco Jetta for a brake conversion to G60 brake. Necessary in order to reach the better volumetric efficiency of the brake and the full brake pressure.
- ✓ for Golf 1 series, e.g. Cadyy 14d Corrado Scirocco Jetta.
- ✓ Engine: base Golf 3, Golf 4 Audi A3 etc..
- ✓ Gearbox: 5-speed 02A/02J and CDA from base Golf 3 and 4
- ✓ 6 speed 4Motion 4WD gearbox conversion kit to convert into a 2WD front-wheel drive. Thus, the 6 speed 02M gearbox can be installed on any front-wheel drive vehicle.
Short shifter in stainles steel.Tailor-made for VW vehicles with cylinder capacity from 1,5 ltr on as Golf 1, Jetta 1, Caddy 14d , Scirocco 1 and 2.
- ✓ conversion kit to hydraulic clutch Golf MK4
- ✓ suitable for VW Golf 1, Caddy 14D, Scirocco usw.
- ✓ large master cylinder / main brake cylinder, ideal on all VW models without ABS for a brake conversion to Porsche brake. Or simply to increase the original brake pressure.
- ✓ gas pedal / accelerator pedal adapter / trottle control adapter
- ✓ Golf MK1 Caddy Scirocco
Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.
Gearbox mounting bracket kit, in order to install a control cable gearbox 02A for conversion to VR6 or G60 engine in Golf 1, Caddy 14d, Scirocco Jetta 1 & 2.
- ✓ for e.g VW Golf MK1 MK2 MK3 G60 Passat Scirocco Polo Corrado Jetta, etc
- ✓ connection 1 M10x1 external thread bent
- ✓ connection 2 M10x1 internal thread straight
- ✓ length 57cm / transparent covered
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
Motor cradle for engine exchange.For installation of 1,8T engine in your VW Golf 1 / Caddy 14d / Scirocco vehicle.
Engine and gearbox mounting bracket kit, in order to install a control cable gearbox 02A/02J for conversion to VR6 or G60 engine im Golf MK1, Caddy 14d, Scirocco Jetta 1 & 2.
- ✓ for Golf MK1 series, also Caddy 14d Corrado Scirocco Jetta
- ✓ engine: 4 cylinder engines, basis from Golf MK3 and MK4
- ✓ for Golf MK1 Cabrio Caddy 14D
- ✓ engine: based on Golf MK3, Golf MK4 Audi A3 etc.
- ✓ gearbox: 5 speed 02A/02J/CDA gearbox , based on Golf MK3 and MK4
- ✓ sliding piece / slide for all 02M, 02Q 6 speed 02A and 02J 5 speed manual gearbox, e.g on VW Golf MK4 R32 models
- ✓ tension pulley adapter with pulley for VW Golf 1 Caddy 1,8T / 2,0 16V AGU , etc. Engine conversion
Original VW gearbox pull cable. For the installation of a cable pull gearbox typ 02 A equipping G60 VR6 1,8T. Allows its installation with mechanical operation on VW Golf 1 Golf 2 Caddy und Scirocco 1.
- ✓ suitable for VW Golf MK1, Scirocco und Caddy 1
- ✓ complete conversion set to convert to the 02A / 02J gearbox, combined with the 1,8T / 1,9TDI engine from VW Golf MK4
- ✓ for rear axle: VW Golf MK2, MK3, GTI, VR6, Corrado, Jetta, Passat 35i, Scirocco, Vento, Polo 6N1, Seat Cordoba, Ibiza, Toledo
- ✓ brakce caliper: Audi R32 S3 rear
- ✓ brake disc: Audi R32/S3 rear 256x22mm
- ✓ adapter plate for the fusebox / fuse box sheet plate for the Golf MK1 series. Conversion to 02A gearbox
- ✓ repair plate for all 1.9 and 2.0 TDI engines installed in e.g. Golf MK4, Audi A3, VW Bora, Beetle, Seat, Skoda, and many more.
- ✓ for Golf MK1 series, e.g. Caddy 14d Corrado Scirocco Jetta
- ✓ gearbox: 5 speed 02A/02J, based on Golf MK3 and MK4
- ✓ tension pulley adapter for VW Golf MK1 Caddy 1,8T / 2,0 16V AGU, etc. Engine conversion.
- ✓ bearing block / bracket, gear mounting brakcet for Golf MK1 Jetta Scirocco Caddy 14d
Original VW clutch bracket. For the installation of a cable pull gearbox typ 02 A equipping G60 VR6 1,8T. Allows its installation with mechanical operation on VW Golf 1 Caddy und Scirocco 1.
- ✓ clutch slave cylinder from VW Golf 4, Audi A3, Seat Leon and Skoda Octavia
- ✓ for Golf 1 series, e.g. Caddy 14d Corrado Scirocco Jetta
- ✓ VAG 4 cylinder engines from 1.8T G60 1.9TDI
- ✓ Gearbox: 6-speed 02M from base Golf 4 R32
- ✓ reinforced engine mounting / engine bearing for Golf MK1 with 74mm external diameter and shore Hardness 68
- ✓ reinforced engine mounting / engine bearing for Golf MK1 with 64,4mm external diameter with shore Hardness 78
- ✓ reinforced engine mounting bearing for the front, made of rubber shore hardness 70 (original is 55-60)
Motor cradle for engine exchange.For installation of G60 engine in your VW Golf 1 / Caddy 14d / Scirocco vehicle.
- ✓ nipple adapter for conversion VW Golf MK1 MK2 MK3 Corrado, Vento, Scirocco, Caddy, to hydraulic line/cable
Easy engine swap with our complete engine and gearbox mounting bracket kit. These bracket make possible the installing of 1,9TDI 1,8l ABF G60 and 2.0 L engines in your VW Golf MK1 / Caddy 14d / Scirocco Jetta 1 & 2.
- ✓ reinforced gear bearing for screwing made of rubber shore hardness 68 (original is 55-60)
- ✓ conversion kit to hydraulic clutch from Golf MK4
- ✓ suitable for Golf MK1,Caddy 14D, Scirocco, etc
- ✓ for vehicle with PCD : 4x100 and hub diameter / hub centric : 57,1,5
- ✓ to rims with PCD : 4x108
- ✓ brake disc diameter : 57,,1
- ✓ enlargement per wheel : 20mm