You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Golf MK1 Caddy Scirocco Conversion Gas Pedal Accelerator Adapter Trottle Control for Golf MK4 DBW R32 V6 TDI Accelerator Cable

€53.39*

Available
Delivery by Saturday, 04.05.2024 if you order within the next 10 Hours.
Product number: 871
Weight: 0.291 kg

Gas pedal / accelerator pedal / trottle control adapter suitable for:

  • Golf 1
  • Caddy 14D
  • Jetta
  • Scirocco 

Our accelerator pedal adapter is needed because Golf MK4 Audi A3 and TT have an electronic throttle cable / accelerator cable. If you want to install the Golf MK4 engine in your Golf MK1, Caddy or Scirocco, we also recommend to take over the accelerator pedal of the "donor" vehicle, so that a perfect engine running can be guaranteed. It should definitely be converted to electronic gas.

With our adapter, this is very easy and quickly. Fix the adapter to the original brackets in the vehicle and then screw the accelerator pedal of the "donor" vehicle to our adapter.then connect everything and already the throttle valve runs perfectly coordinated, as in the "donor" vehicle.

OE number of the gas pedal that can be used: (Important: It must be ensured that the accelerator pedal has the hole bottom left as in our adapter, because there are also identical pedals, which have the Aufnahem right )

VW 1J1721503E
AUDI 6Q1 721 503A

Brake and clutch pedal remain untouched.

Delivery:

1x gas pedal / accelerator pedal adapter / throttle control adapter for Golf MK1, Caddy 14D, Jetta, Scirocco . Conversion to Golf MK4 Audi TT engine

36 of 36 reviews

4.61 out of 5 stars


75%

11%

14%

0%

0%


Leave a review!

Share your experiences with other customers.


28 February 2024 09:30

Yorian N

Good quality, not fitted yet.

12 January 2024 23:27

Florian G

Wie immer ein Mega Produkt von euch, super einfache passgenaue Lösung in super quali. 👍🏼

21 December 2023 07:41

Niels B

Das teil ist nicht 100% Die schrauben fon gaspendal passt nicht perfect Muss ich bischei bei bohren

21 December 2023 07:41

Niels B

Das teil ist nicht 100% Die schrauben fon gaspendal passt nicht perfect Muss ich bischei bei bohren

13 December 2023 14:07

David S

Mir war leider nicht ersichtlich wie es verbaut werden soll, ein Bild vom Einbauzustand wäre schön gewesen. Habe es wieder zurück geschickt, da ich beim nochmaligen lesen der Artikelbeschreibung feststellen habe, das es nicht bei meinem Gaspedal passt.

29 November 2023 11:40

Andreas K

Auch bei diesen Adapter bleibt die bestehende Pedalanlage unangetastet. Nur das alte Gaspedal kommt weg und mit dem Adapter kann das E-Gaspedal einfach montiert werden. Besser geht es nicht.

11 November 2023 09:18

Stanislav T

No issues

29 September 2023 08:32

Lukas D

Da der Halter nicht ganz passt. Preis Leistung, passt leider nicht, da ich nachbiegen musste und nach bohren. Ich würde ihn weiter empfehlen, wenn der Halter die hälfte kostet, aber der Preis, zu teuer für das, dass er nicht passt.. Skeptisch war ich nie. Sonst passt es

23 March 2023 08:04

Nick S

Verarbeitung ist gut. Passte ohne größere Probleme, lediglich eine der Schrauben zum befestigen des Pedals an diesem Halter ist sehr schwer zugänglich. Ich kann das Produkt aber ohne Zweifel empfehlen.

22 March 2023 21:23

Dominik S

Stehbolzen musste man etwas verbiegen damit es passt

  • Does the adapter also fit right hand drive vehicles?
  • No, the adapter only fits vehicles with a left hand drive. This means that the adapter fits all vehicles that are driving on the right.

Passendes Zubehör

VW Gearbox Engine Bracket Golf MK1 Caddy Scirocco VR5 20V and 10V AQN AGZ 02J

Easy engine conversion with our complete engine and gearbox mounting bracket kit (02A/02J/EBA). These bracket make possible the installing of VR5 20V and 10V NDI AGZ engines in your VW Golf VW Golf 1 / Caddy 14d / Scirocco Jetta 1 & 2.

€155.64*
Artikelnummer: 161
Gearbox Mounting Bracket Golf 1 Caddy 1.8 T 02A Gearbox Engine Bracket Set
  • ✓ for Golf 1 series, e.g. Caddy 14d Corrado Scirocco Jetta
  • ✓ Engine: Basis Golf 4 Audi A3 etc.
  • ✓ Gearbox: 5-speed 02A / 02J based on Golf 3 and 4

€131.85*
Artikelnummer: 323
6 Speed Gearbox Mounting Bracket 02M Golf MK1 Scirocco Caddy 14d G60 16V VR6 4WD Axle
Gearbox mounting brackets, to install the R32  6  speed gearbox 02M, combined with 16V VR6 1.8T engine on Golf MK1 Caddy 14d Scirocco, etc., 4WD-axles

€178.15*
Artikelnummer: 160
%
Engine bracket Golf Scirocco Caddy 1 Rubber Gearboc cradle Motor holder PU Shore 65-70

High resistant rubber bearing kit for engine and gearbox.For installation on Golf 1. Perfect for motor conversion on VR6 or V16 engine.

€73.64* €86.63* (14.99% saved)
Artikelnummer: 445
Front Reinforcement Crossbar VW Golf MK1 Caddy Scirocco 1 VR6 1,8T Conversion
Stable front reinforcement crossbar for Golf MK1 Caddy 14d and Scirocco 1

€121.10*
Artikelnummer: 192
6-gear Gearbox cradle for gearbox 02M on Golf Passat Corrado G60 16V Vr6 Gearbox Cradle Engine
  • ✓ for Golf 1 series, e.g. Caddy 14d Corrado Scirocco Jetta
  • ✓ VAG 4 cylinder engines from 1.8T G60 1.9TDI
  • ✓ Gearbox: 6-speed 02M from base Golf 4 R32

€168.07*
Artikelnummer: 542
VW Golf Caddy Scirocco Engine Mounting Bracket Support VR 5 Engine Conversion
  • ✓ engine mounting bracket / enginr support for VW Golf MK1 Caddy 14d Scirocco Jetta 1 & 2

€84.26*
Artikelnummer: 161-T1
6-speed Gearbox Mounting Bracket 02Q for Golf MK1 Scirocco Caddy 14d G60 16V 1,8T 1,9TDI Gearbox Support 4-cylinder
  • ✓ for Golf MK1 series, e.g. Caddy 14d Corrado Scirocco Jetta
  • ✓ VAG 4-cylinder engines from 1,8T G60 1.9TDI
  • ✓ gearbox: 6-speed 02Q based on Golf 5

€199.45*
Artikelnummer: 1055
Reinforced Engine Mounting Bearing Gearbox Mounting Bearing Rear Golf MK1 Scirocco Caddy Jetta 171 399 151A Shore Hardness 68
  • ✓ reinforced gear bearing for screwing made of rubber shore hardness 68 (original is 55-60)

€30.99*
Artikelnummer: 1082
Reinforced Engine Mounting Bearing Front VW Golf MK1 Scirocco Caddy Jetta 171 199 339 Shore Hardness 70
  • ✓ reinforced engine mounting bearing for the front, made of rubber shore hardness 70 (original is 55-60)

€14.89*
Artikelnummer: 1083
Reinforced Engine Mounting Bearing Gearbox Mounting Bearing Golf 1 Scirocco Caddy Jetta 171 199 214G 74,5mm Ø Shore Hardness 68
  • ✓ reinforced engine mounting / engine bearing for Golf MK1 with 74mm external diameter and shore Hardness 68

€26.81*
Artikelnummer: 990
Reinforced Engine Mounting Bearing Gearbox Mounting Bearing Golf MK1 Scirocco Caddy Jetta 74mm Ø Shore Hardness 68
  • ✓ reinforced engine mounting / engine bearing for Golf MK1 with 64,4mm external diameter with shore Hardness 78

€20.54*
Artikelnummer: 583
You can find out everything about your order via your -> View customer account