Golf MK1 Caddy Brake Caliper Adapter G60 S2 Adapter Brake System
- ✓ 280x22 535615301 G60 brake disc
- ✓ 1-piston Girling 54 443615124A / 443615123A brake caliper
- ✓ front axle
€105.69*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, front axle, for Golf MK1, Golf MK1 Cabrio, Caddy 14d, Jetta 1, Scirocco to convert to 280 mm brake system from the following models:
- Golf 2 G60 (incl. Syncro)
- Passat G60 (incl. Syncro)
- Corrado G60
Combined with the Girling or Lucas 54 Sätteln und 280 mm brake discs.
NEW: delivered in black color. Our caliper adapters are manufactured with a special method against corrosion, which guarantees best rust protection and abrasion resistance
Advantages of this brake system:
no more fading with G60 brake system .high deceleration, also in conjunction with our rear axle braking system
thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Tip:
If you don't have the brake caliper carrier and brake calipers yet, we have the perfect solution for you here article APA274 (click here).
The brake caliper carriers were developed in such a way that you no longer have to install an adapter to install the G60 system on your vehicle.
You can mount the brake calipers and brake caliper brackets directly on your vehicle.
What is the difference between item number 216 and 142'
The hole dimensions of the two tuning adapters are identical. We recommend always to install the article 216, because it is more stable. The tuning adapter 142 we have developed for the VW Polo axle, since this is slightly different in shape and the tuning adapter 216 can not be installed.
Delivery:
- 2x brake caliper adapters, black, galvanized (high-strength steel)
- 4x srews (10.9)
- Installation instructions with detailed picture material
- copy of vehicle document to simplify the registration
- material certificate
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
2 - 10 of 94 reviews
2 September 2018 03:18
Tim C
Awesome product, purchased as it looked the best on the market due to recesd hub bolting location. Epytec has been great with the service communication and beautiful product. Im yet to use product but Im sure itll be fantastic.
10 May 2019 06:59
Frank M
Präzise gefertigtes Teil. Problemlose Eintragung durch Gutachten und Kennzeichnung auf dem Bauteil.
28 September 2019 19:54
Martin C
top ware top service gerne wieder
24 April 2020 13:34
Yannick D
Good quality! Easy to assemble. Perfect parts!
14 August 2020 13:41
Tilman N
Einbau war locker zu bewältigen, Teile sind sehr passgenau. Kann ich nur weiterempfehlen.
14 January 2021 11:27
Gishamer M
Was soll man sagen außer top Produkt 👍🏽
23 July 2021 13:13
Roland V
Mooi afgewerkt Goede pasvorm
30 January 2022 09:32
Nick V
Super Adapter, hatte zuerst das Gusseisen aber diese sind um ein Vielfaches besser. Das Produkt war super gut verpackt, würde es jedem empfehlen
22 March 2023 19:54
Tobias W
Hervorragende Passgenauigkeit. Stabiles Material. Unkomplizierter und schneller Verkauf! Ich bin sehr zufrieden!
1 December 2023 10:51
Goran I
zadovoljni smo brzom isporukom, kvalitetom dijelova i svime potrebnim za ugradnju
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Front axle left
- ✓ Golf 1 Cabrio, Scirocco 1, Caddy Jetta
- ✓ Registration free
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Bore 14mm
- ✓ 45 degree curved
- ✓ for welding
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ 5x100 bolt circle
- ✓ Plug & Play
- ✓ VW Jetta / VW Caddy / Golf 1
- ✓ ABS conversion
- ✓ high-strength aluminum
- ✓ Golf 1 Caddy Jetto Scirocco
- ✓ For G60 16V brake
- ✓ Golf 1 Golf 2 Golf 3
- ✓ original equipment manufacturer quality
- ✓ drive shaft flange
- ✓ VW Golf 1.86.5mm to 94mm
- ✓ 280x22
- ✓ 65mm centering
- ✓ 40mm height
- ✓ Front axle right
- ✓ Golf 1 Cabrio, Scirocco 1
- ✓ registration free
- ✓ 280x22
- ✓ 65mm centering
- ✓ 39.5mm height
- ✓ 280x22
- ✓ 65mm centering
- ✓ 39.5mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ VW Golf 2-3 / Passat / Corrado / Jetta 2
- ✓ 280x22
- ✓ 65mm centering
- ✓ 40mm height
- ✓ 280x22
- ✓ 65mm centering
- ✓ 40mm height
- ✓ Length: 32cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 226x10 357615601 G60 brake disc
- ✓ 1-piston Girling 38 191615423 / 191615424 brake caliper
- ✓ rear axle
- ✓ 5x100 bolt circle
- ✓ Plug & Play
- ✓ Golf 1 / Caddy / Jetta / Scirocco
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ VW Golf 1 / Scirocco / Caddy / Jetta
- ✓ Complete kit
- ✓ front axle: OE quality
- ✓ Brake caliper right for VW Golf Corrado G60 conversion Lucas / ATE /Girling 54
- ✓ front axle: OE quality
- ✓ handbrake cable
- ✓ VW Golf 3 Vento Corrado
- ✓ 1H0 609 721A VAG, 535 609 721A VAG
- ✓ 5x100 bolt circle
- ✓ Plug & Play
- ✓ VW Golf 2-3 / Jetta 2
- ✓ excellent fit
- ✓ front axle Jetta 1 / Golf 1 / Scirocco 1-2 / VW Caddy 14D
- ✓ high stability
- ✓ excellent fit
- ✓ front axle Jetta 1 / Golf 1 / Scirocco 1-2 / VW Caddy 14D
- ✓ high stability
- ✓ Brake caliper left for VW Golf 2 3 Corrado G60 conversion Lucas / ATE / Girling 54
- ✓ front axle: OE quality
- ✓ Universal joint for power steering
- ✓ OE number: 175 422 951A
- ✓ VW Golf 1 convertible
- ✓ 357615125C
- ✓ Golf Corrado G60
- ✓ Front axle
- ✓ OE: 171201651A
- ✓ Made of stainless steel
- ✓ Golf 1 Cabrio, Jetta I Scirocco 1
- ✓ 857615125 / BDA168
- ✓ VW Golf 1, Caddy, Golf 1 Cabriolet, Jetta 1, Scirocco, Polo
- ✓ Front axle
- ✓ electric brake light adapter
- ✓ Golf 1, Caddy 14D, Scirocco, Jetta
- ✓ easy conversion
- ✓ 375x36 1664210912 Mercedes ML / GL brake disc
- ✓ 6-piston 7PP615149J / 7PP615150J brake caliper
- ✓ front axle
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
- ✓ 5x100 bolt circle
- ✓ Plug & Play
- ✓ Golf 1 / Jetta 1 / Scirocco / Caddy
- ✓ Front wheel bearing housing
- ✓ Plug & Play
- ✓ Golf 1 / Jetta 1 / Scirocco / Caddy 14D
- ✓ 4x100 bolt circle
- ✓ Plug & Play
- ✓ Golf 1 / Jetta 1 / Scirocco / Caddy 14D
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ Golf 1 / Jetta 1 / Scirocco / Caddy
- ✓ 5x100 bolt circle
- ✓ Plug & Play
- ✓ Golf 1-3 / Jetta / Scirocco
- ✓ 4x100 bolt circle
- ✓ Plug & Play
- ✓ Golf 1 / Jetta / Scirocco
- ✓ 375x36 1664210912 Mercedes ML / GL brake disc
- ✓ 6-piston 7PP615149J / 7PP615150J brake caliper
- ✓ front axle
- ✓ For G60 16V brake
- ✓ Golf 1 Golf 2 Golf 3
- ✓ original equipment manufacturer quality
- ✓ 226x10 357615601 G60 brake disc
- ✓ 1-piston Girling 38 191615423 / 191615424 brake caliper
- ✓ rear axle
- ✓ Complete kit
- ✓ front axle: OE quality
- ✓ Length: 32cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 280x22
- ✓ 65mm centering
- ✓ 39.5mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 280x22
- ✓ 65mm centering
- ✓ 40mm height
- ✓ ABS conversion
- ✓ high-strength aluminum
- ✓ Golf 1 Caddy Jetto Scirocco
- ✓ 5x100 bolt circle
- ✓ Plug & Play
- ✓ VW Jetta / VW Caddy / Golf 1
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Bore 14mm
- ✓ 45 degree curved
- ✓ for welding
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Front axle right
- ✓ Golf 1 Cabrio, Scirocco 1
- ✓ registration free
- ✓ 280x22
- ✓ 65mm centering
- ✓ 39.5mm height
- ✓ Front axle left
- ✓ Golf 1 Cabrio, Scirocco 1, Caddy Jetta
- ✓ Registration free
- ✓ drive shaft flange
- ✓ VW Golf 1.86.5mm to 94mm
- ✓ 280x22
- ✓ 65mm centering
- ✓ 40mm height
- ✓ 280x22
- ✓ 65mm centering
- ✓ 40mm height
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ VW Golf 1 / Scirocco / Caddy / Jetta
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ VW Golf 2-3 / Passat / Corrado / Jetta 2
- ✓ Brake caliper right for VW Golf Corrado G60 conversion Lucas / ATE /Girling 54
- ✓ front axle: OE quality
- ✓ handbrake cable
- ✓ VW Golf 3 Vento Corrado
- ✓ 1H0 609 721A VAG, 535 609 721A VAG
- ✓ 5x100 bolt circle
- ✓ Plug & Play
- ✓ VW Golf 2-3 / Jetta 2
- ✓ excellent fit
- ✓ front axle Jetta 1 / Golf 1 / Scirocco 1-2 / VW Caddy 14D
- ✓ high stability
- ✓ excellent fit
- ✓ front axle Jetta 1 / Golf 1 / Scirocco 1-2 / VW Caddy 14D
- ✓ high stability
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ 5x100 bolt circle
- ✓ Plug & Play
- ✓ Golf 1 / Caddy / Jetta / Scirocco
- ✓ Brake caliper left for VW Golf 2 3 Corrado G60 conversion Lucas / ATE / Girling 54
- ✓ front axle: OE quality
- ✓ Universal joint for power steering
- ✓ OE number: 175 422 951A
- ✓ VW Golf 1 convertible
- ✓ 357615125C
- ✓ Golf Corrado G60
- ✓ Front axle
- ✓ OE: 171201651A
- ✓ Made of stainless steel
- ✓ Golf 1 Cabrio, Jetta I Scirocco 1
- ✓ 857615125 / BDA168
- ✓ VW Golf 1, Caddy, Golf 1 Cabriolet, Jetta 1, Scirocco, Polo
- ✓ Front axle
- ✓ electric brake light adapter
- ✓ Golf 1, Caddy 14D, Scirocco, Jetta
- ✓ easy conversion
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
- ✓ 5x100 bolt circle
- ✓ Plug & Play
- ✓ Golf 1 / Jetta 1 / Scirocco / Caddy
- ✓ Front wheel bearing housing
- ✓ Plug & Play
- ✓ Golf 1 / Jetta 1 / Scirocco / Caddy 14D
- ✓ 4x100 bolt circle
- ✓ Plug & Play
- ✓ Golf 1 / Jetta 1 / Scirocco / Caddy 14D
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ Golf 1 / Jetta 1 / Scirocco / Caddy
- ✓ 5x100 bolt circle
- ✓ Plug & Play
- ✓ Golf 1-3 / Jetta / Scirocco
- ✓ 4x100 bolt circle
- ✓ Plug & Play
- ✓ Golf 1 / Jetta / Scirocco