VW Golf 1 2 3 Passat Scirocco Seat Cordoba Brake bolt circle conversion kit 4x100 rear axle VW Golf 1 2 3
- ✓ 4x100 bolt circle
- ✓ Plug & Play
- ✓ Golf 1 / Jetta / Scirocco
€601.63*
- 30 days money back guarantee
- shipping within 24h
- 15 years expert knowledge
- 2 years warranty
If you finally want to drive 4x100 rims, you've come to the right place.
Complete conversion kit for the rear axle to run rims with a 4x100 bolt circle on the VW Golf 1 2 3.
The conversion kit is for the G60 brake discs 226mm with bolt circle 4x100
The set contains everything you need for the conversion
This is probably the best alternative to our bolt circle adapters, as it does not widen the track.
Suitable for the following VW and Seat models (front-wheel drive):
- Golf 1
- Golf 2 3 + GTI+ VR6
- Corrado
- Jetta
- Passat 35i
- Scirocco
- Vento
- Polo 6N1
- Seat Cordoba
Advantages:
- No bolt circle adapters necessary
- Plug & Play use, no re-drilling of the brake discs necessary, etc.
- Wheel arches do not necessarily have to be removed (depending on the rim width installed, of course)
Scope of delivery:
Complete conversion kit for rear axle on Golf 1, 2, 3, Jetta I, II, Passat, Scirocco, etc. consisting of:
- 2x brake disc 226mm
- 4x brake pads
- 2x wheel bearing set, 5-hole
- ABS sensor ring
- 2x armature plate
- 2x axle pivot
- 2x parking brake cable
- 2x brake calliper carrier
- 2x brake calliper
- 4x brake hose
- 1x screw set
- Material certificate
Technical data:
Login
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- ✓ 280x22 535615301 G60 brake disc
- ✓ 1-piston Girling 54 443615124A / 443615123A brake caliper
- ✓ front axle
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ Golf 1 / Jetta 1 / Scirocco / Caddy
- ✓ 4x100 bolt circle
- ✓ Plug & Play
- ✓ Golf 1 / Jetta 1 / Scirocco / Caddy 14D