Caddy 14d Brake Caliper Adapter Brake Disc G60 Rear Lowering
- ✓ 226x10 357615601 G60 brake disc
- ✓ 1-piston Girling 38 191615423 / 191615424 brake caliper
- ✓ rear axle
€177.37*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Rear axle adapter kit to convert the Caddy 14D rear axle to G60 disc brake.
Advantages:
- ability to brake and vent a lot better than a conventional drum brake
- top optics and profesionnal conversion
- lowered rear axle by 25mm
- thanks to the material certificate supplied with the order and to a correct conversion, it is possible to register your purchase even for series vehicles
- can always be restored to the original state without any problems
With our brake caliper adapters and the supplied axle pins / stubs, the G60 brake discs and brake calipers can be installed on the Caddy 14d.
With our adapter, the track is 15mm wider per side and the vehicle ist 25mm deeper on the rear axle.
Delivery:
- 2x brake caliper adapters (high-strength steel)
- 2x axle pins / stubs
- 2x bushs made of high-strength aluminium for the hand brake cable
- high-strength mounting screws (10.9)
- material certificate
- Installation instructions
With this conversion kit, the S3 / R32 brake can be installed in conjunction with our spacer adapter, combined with the 280mm brake discs on the rear axle.
In our shop, we also have corresponding adapters for the front axle to convert to the G60 280 brake. Visit our shop!
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can not answer generally, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want.
Click here to go to the >> configure steel braided brake lines << - Always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.
Technical data:
Login
10 March 2017 16:50
der-graue-anzug
Alles Bestens, Top Ware, schneller Versand, gerne wieder.
22 December 2016 22:21
erdi882009
Alles Top!!vielen dank gerne wieder!!!
- Can camber correction plates be installed with this adapter?
Yes, camber correction plates can be used, these are installed between the adapter plate and the axle journal.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Over 55mm Deeper
- ✓ Plug & Play
- ✓ For Caddy 14d
- ✓ 280x22 535615301 G60 brake disc
- ✓ 1-piston Girling 54 443615124A / 443615123A brake caliper
- ✓ front axle
- ✓ Up to 100mm higher length
- ✓ installation only takes approx. 1 hour
- ✓ Caddy 14D
- ✓ Complete kit
- ✓ rear axle: OE quality
- ✓ 80-140mm Deeper
- ✓ Plug & Play
- ✓ For Volkswagen Caddy 3
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ Up to 100mm lower/higher
- ✓ plug and play
- ✓ for Volkswagen Caddy 3
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ negative
- ✓ 5/6mm thickness
- ✓ suitable for VW Caddy 14D
- ✓ 226x10
- ✓ 39.8mm centering
- ✓ 71mm height
- ✓ 226x10
- ✓ 50mm centering
- ✓ 71mm height
- ✓ 226x10
- ✓ 39.8mm centering
- ✓ 71mm height
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ OE:147201651A
- ✓ Made of stainless steel
- ✓ VW Caddy 14D
- ✓ VW Caddy year 2004-2011
- ✓ better directional stability
- ✓ easy installation