Flywheel Kit BMW E28 E30 E34 2,5L and 2,7 M20 Engine 228mm Flywheel Clutch Pressure Plate Organic
- ✓ 2.5, 2.7 M20 engine
- ✓ 228mm clutch
- ✓ 450NM torque
£852.41*
- Express shopping
- Save your data and settings
- Order overview and shipping information
- Manage your newsletter subscription
- 19 Jahre Expertenwissen
Clutch kit for all 2.5 and 2.7 M20 engines WITH Motronic / L-Jetronic installed in the:
- BMW 5 series 525e ( E28 )
- BMW 3 series 325i 325iX 325e ( E 30 )
- BMW 3 series Touring 325i 325iX ( E30 )
- BMW 3 series Cabrio 325i ( E30 )
- BMW 5 series 525i ( E34 )
- BMW Z1 Roadster 2.5
Consists of:
- lightened high strength chrome molybdenum flywheel EPYTEC
- rigid, sinterpad clutch disc SACHS
- clutch pressure plate, reinforced design SACHS
Advantages of our clutch kit with lightened flywheel:
- our flywheel weighs only 5.3 kg, the standard wheel over 12.0 kg
- exactly identical in construction to the series components, therefore easy replacement possible
- it is not necessary to send us the original engine flywheel
- higher contact pressure and less abrasion of the pressure plate
- all our flywheels are made of chrome moly steel with quality G 1.75, extremely suitable for high-speed motors
- significantly better acceleration due to less inertia
- higher speeds possible
- the engine runs faster
- More direct response behaviour
- suitable for motorsports, racing or serial vehicles
- lower fuel consumption
- significant reduction of the turbo lag
- precision balancing, bearings are less affected
- including ring gear
- suitable for either a standard clutch or a high-performance clutch
- made in Germany
Advantages of the torsion spring clutch disc with organic performance clutch lining and the reinforced pressure plate:
- starting behavior similar to series
- significantly higher transmittable torque
- the torsional damping achieves a higher impact moment
- better thermal resilience compared to organic friction coating/lining
- longer lifetime
- less lift
- higher pressing force
- higher speeds possible
Areas of application:
- series and road vehicles
- chip tuning, turbo and compressor conversions
- vehicles with maximum loads
- vehicles with trailer
- 1/4 mile race
- circuit racing (e.g. endurance racing, motor sport, cross)
- rallies (e.g. category N)
- hill climb, slalom, drift
Technical data:
- transmittable torque[Nm]: 450
- weight of the lightened single-mass flywheel: 5,3 Kg
Delivery:
- 1x lightened high strength chrome molybdenum flywheel EPYTEC
- 1x spring organic clutch disc SACHS
- 1x clutch pressure plate, reinforced design SACHS
Login
| Motor | Motorcode |
|---|---|
| 525e | E28|129PS(95KW) |
| 525i | E34|170PS(125KW) |
| 525e | E28|125PS(92KW) |
| 525e | E28|122PS(90KW) |
| Motor | Motorcode |
|---|---|
| 325i | E30|170PS(125KW) |
| 325i X | E30|170PS(125KW) |
| Motor | Motorcode |
|---|---|
| 2.5 | --|170PS(125KW) |
| Motor | Motorcode |
|---|---|
| 325i | E30|171PS(126KW) |
| 325i | E30|170PS(125KW) |
| Motor | Motorcode |
|---|---|
| 325i X | E30|170PS(125KW) |
| 325e 2.7 | E30|122PS(90KW) |
| 325i X | E30|171PS(126KW) |
| 325i | E30|170PS(125KW) |
| 325e 2.7 | E30|129PS(95KW) |
| 325i | E30|171PS(126KW) |
| Motor | Motorcode |
|---|---|
| 525e | E28|129PS(95KW) |
| 525i | E34|170PS(125KW) |
| 525e | E28|125PS(92KW) |
| 525e | E28|122PS(90KW) |
| Motor | Motorcode |
|---|---|
| 325i | E30|170PS(125KW) |
| 325i X | E30|170PS(125KW) |
| Motor | Motorcode |
|---|---|
| 2.5 | --|170PS(125KW) |
| Motor | Motorcode |
|---|---|
| 325i | E30|171PS(126KW) |
| 325i | E30|170PS(125KW) |
| Motor | Motorcode |
|---|---|
| 325i X | E30|170PS(125KW) |
| 325e 2.7 | E30|122PS(90KW) |
| 325i X | E30|171PS(126KW) |
| 325i | E30|170PS(125KW) |
| 325e 2.7 | E30|129PS(95KW) |
| 325i | E30|171PS(126KW) |
- ✓ Reinforced version
- ✓ BMW E30 E34 325i 520i M20
- ✓ 650mm diameter
- ✓ BMW E30 / E34 engine
- ✓ 450 torque
- ✓ hub profile: 23x29-10N
- ✓ for 18mm tie rods
- ✓ BMW E39 520i, 530i, 528i.....
- ✓ 100% perfect fit
- ✓ Two-piece design
- ✓ different thicknesses
- ✓ many diameters
- ✓ BMW E36, E46, Z3, BMW E30
- ✓ 6.4mm thickness, 7.4mm thickness
- ✓ Steering gear
- ✓ Conversion bolt circle 5x120
- ✓ wheel hub E36 / E46
- ✓ front axle
- ✓ 5x120 bolt circle
- ✓ Plug & Play
- ✓ BMW E30
- ✓ 294x22 34119804828 Mini Countryman brake disc
- ✓ 1-piston 34111160352 / 34111160351 BMW E36/E46 320i-328i brake caliper
- ✓ front axle
- ✓ 2.5 & 2.7 M engines with Motronic
- ✓ 228 clutch
- ✓ lightens 4.9 kg
- ✓ 340x30 34106797602 BMW F21/30/32 brake disc
- ✓ 4-piston 34116799465 / 34116799466 BMW F21 / 30 / 32 brake caliper
- ✓ front axle
- ✓ 0.5 degrees positive/negative
- ✓ 6mm thickness
- ✓ Suitable for BMW E30 E24 E28 E34 M3 S14
- ✓ 5x120 bolt circle
- ✓ Plug & Play
- ✓ BMW E30
- ✓ excellent fit
- ✓ front axle BMW E30
- ✓ high stability
- ✓ excellent fit
- ✓ rear axle BMW E36
- ✓ high stability
- ✓ Suitable for all M50 M52 S50 and S52 engines
- ✓ High-strength aluminum
- ✓ Made in Germany
- ✓ 2x eccentric screw BMW E30 M12x95 high strength
- ✓ 294x19 34211165563 BMW E46 328i brake discs
- ✓ 1-piston 34211160399 / 34211160400 BMW E34 540i brake caliper
- ✓ rear axle
- ✓ 2.5 & 2.7 M engines without Motronic
- ✓ 228 clutch
- ✓ lightens 5.0 kg
Passendes Zubehör zusammen kaufen und sparen
- ✓ Reinforced version
- ✓ BMW E30 E34 325i 520i M20
- ✓ 650mm diameter
- ✓ BMW E30 / E34 engine
- ✓ 450 torque
- ✓ hub profile: 23x29-10N
- ✓ for 18mm tie rods
- ✓ BMW E39 520i, 530i, 528i.....
- ✓ 100% perfect fit
- ✓ Two-piece design
- ✓ different thicknesses
- ✓ many diameters
- ✓ BMW E36, E46, Z3, BMW E30
- ✓ 6.4mm thickness, 7.4mm thickness
- ✓ Steering gear
- ✓ Conversion bolt circle 5x120
- ✓ wheel hub E36 / E46
- ✓ front axle
- ✓ 5x120 bolt circle
- ✓ Plug & Play
- ✓ BMW E30
- ✓ 294x22 34119804828 Mini Countryman brake disc
- ✓ 1-piston 34111160352 / 34111160351 BMW E36/E46 320i-328i brake caliper
- ✓ front axle
- ✓ 2.5 & 2.7 M engines with Motronic
- ✓ 228 clutch
- ✓ lightens 4.9 kg
- ✓ 340x30 34106797602 BMW F21/30/32 brake disc
- ✓ 4-piston 34116799465 / 34116799466 BMW F21 / 30 / 32 brake caliper
- ✓ front axle
- ✓ 0.5 degrees positive/negative
- ✓ 6mm thickness
- ✓ Suitable for BMW E30 E24 E28 E34 M3 S14
- ✓ 5x120 bolt circle
- ✓ Plug & Play
- ✓ BMW E30
- ✓ excellent fit
- ✓ front axle BMW E30
- ✓ high stability
- ✓ excellent fit
- ✓ rear axle BMW E36
- ✓ high stability
- ✓ Suitable for all M50 M52 S50 and S52 engines
- ✓ High-strength aluminum
- ✓ Made in Germany
- ✓ 2x eccentric screw BMW E30 M12x95 high strength
- ✓ 294x19 34211165563 BMW E46 328i brake discs
- ✓ 1-piston 34211160399 / 34211160400 BMW E34 540i brake caliper
- ✓ rear axle
- ✓ 2.5 & 2.7 M engines without Motronic
- ✓ 228 clutch
- ✓ lightens 5.0 kg