BMW E30 325i 320i Brake Caliper Adapter Rear E34 540i 294 x19 Discs Brake System 5x120
- ✓ 294x19 34211165563 BMW E46 328i brake discs
- ✓ 1-piston 34211160399 / 34211160400 BMW E34 540i brake caliper
- ✓ rear axle
€146.69*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, rear axle, for BMW E30 models to install the large rear axle caliper E34, combined with the disc of BMW E46 328i, 294x19 mm.
The rims must have at least 16 inch.
Required components:
- bracke dics rear BMW E46 328i with 294x19 mm , reference: 34 21 1 165 563
- brake caliper reart BMW E34 540i ; E32 740i, 750i ; E36 M3 3,0 u. 3,2L
- reference: 34 21 1 160 399
- reference: 34 21 1 160 400
The following modification is required:
- conversion to PCD 5x120 with BMW Z4 wheel hub
Advantages:
- high deceleration
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
- screws are supplied
- The handbrake function continues to exist
Delivery:
- 2x brake caliper adapters
- high-strength mounting screws
- copy of vehicle documents to simplify the registration
- material certificate
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
26 June 2020 11:10
MIGUEL ANGEL H
excellent finish.
12 February 2020 07:20
brachidesigns
Top Ebayer * schnelle Abwicklung * gerne wieder* TOP
17 November 2018 16:39
jakattavera
Alles bestens
10 August 2016 10:24
stefannitsche
Alles bestens - Vielen Dank
29 November 2017 09:56
bigboy86alex
Super gelaufen. Gerne wieder. 😬👍
17 April 2021 20:09
Andre Julian A
Qualität ist einfach sehr gut.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ 312x25 8N0615301A Audi S3 / Golf 4 GTI brake disc
- ✓ 1-piston 34111160365 (casting number 243) 34111160363/364 casting number 60/28/302 BMW E34 540i brake caliper
- ✓ front axle
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ 345x28 34112282445 BMW E46 M3 CSL brake disc
- ✓ 6-piston 34116786741 BMW 135i brake caliper
- ✓ front axle
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ 284x22 46403958 Fiat Coupe brake disc
- ✓ 1-piston 34111160346 / 34111160345 BMW E36 brake caliper
- ✓ front axle
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ Brake force regulator Infinitely variable
- ✓ Perfectly adjustable braking effect
- ✓ suitable for all vehicles
- ✓ 294x19
- ✓ 75mm centering
- ✓ 60mm height
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ 294x19
- ✓ 75mm centering
- ✓ 60mm height
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ 294x19
- ✓ 75mm centering
- ✓ 60mm height
- ✓ 294x19
- ✓ 75mm centering
- ✓ 60mm height
- ✓ 294x18.9
- ✓ 75mm centering
- ✓ 59.7mm height
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track