Brake Caliper Adapter Audi A6 S6 C4 Audi 100 HP2 Suspension Adapter Porsche Cayenne ZR18 ZL18 Brake Caliper
- ✓ 350x32 1644211412 Mercedes brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne Z18 brake caliper
- ✓ front axle
€156.71*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, front axle, on models Audi A6 S6 and Audi 100 for conversion to the Porsche Cayenne ZR 18 brake caliper, combined with the Mercedes brake discs 350x32mm.
Suitable for all models with HP2 suspension.
Advantages:
- The AUDI bolt circle of 5x112 mm (PCD) can be retained. Therefore no costly Porsche bolt circle conversion
- cheap brake discs, you get the pair already for about 180 €.
- can always be restored to the original state without any problems
- Double service life compared to the original brake system
- adapters are made of high-strength steel alloy (including material certificate)
- adapters are delivered galvanized, best corrosion protection according to DIN ISO 9227
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
Required components:
- brake discs: Mercedes 350x32 , reference 164 421 1412
- brake caliper: Porsche Cayenne ZR18 ZL18, reference 95535142153 / 95535142253
- bore hole of brake disc muss be modified to 68mm
Delivery:
- 2x brake caliper adapters for HP2 suspension
- high-strength mounting screws
- Template to check whether the brake system fits under your rim
- material certificate
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
20 June 2022 18:23
Hastreiter B
Sehr hohe Qualität! 100 Prozent passgenau! Total easy zum verbauen. Bringt ein sehr gutes Ergebnis! 👍🏻
13 February 2019 19:46
Annerl R
Alles sehr gut verarbeitet und passgenau. Es gibt diese Adapter bei anderen Anbietern nur ohne Gutachten und in schlechterer Qualität. Der Artikel ist allen weiterzuempfehlen die beim Audi Hp2 federbein Eine z18 bremse montieren möchten. Es gibt keine bessere und schönere Lösung.
21 May 2019 17:25
Marc F
Super Qualität
23 April 2021 19:22
Thomas G
Es war alles schick passte richtig gut einfach sehr gut weiter so
21 April 2022 08:21
Mario R
Gute, gleichbleibende Qualität, Skepsis war nicht vorhanden, Ergebnisse nach den Einbauten sind, dass meistens alles passt wie gewünscht.
18 June 2022 16:41
Hastreiter B
Sehr hohe Qualität! 100 Prozent passgenau! Total easy zum verbauen. Bringt ein sehr gutes Ergebnis! 👍🏻
21 March 2023 20:17
Alexej S
Alles Super
19 January 2020 13:54
Niklas K
Im Prinzip passt der Adapter wirklich Plug & Play, aber man hätte in die Adapter noch Gewinde einschneiden können zur einfacheren Montage, und die Schrauben die dazu geliefert wurden, sind ca 1cm zu lang, was auch hätte berücksichtigt werden können. Was noch dazu kommt ist, dass eine genaue Drehmoment Angabe der Bremssattelschrauben von Vorteil gewesen wäre, da die Schrauben auf eine Alu Hülse Festgezogen werden. Nach dem die Bremsscheibe vom Mercedes Benz genommen werden musste, musste auch die Nabe 1mm aufgedreht werden was wiederum auch nicht so Toll ist. Aber sondern passt alles super und sieht soweit gut aus.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 350x32
- ✓ 67mm centering
- ✓ 55mm height
- ✓ 350x32 1644211412 Mercedes brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne Z18 brake caliper
- ✓ front axle
- ✓ 350x32
- ✓ 67mm centering
- ✓ 55mm height
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ 350x32 1644211412 Mercedes brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne Z18 brake caliper
- ✓ front axle
- ✓ 312x25
- ✓ 67mm centering
- ✓ 34.4mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 350x32 1644211412 Mercedes brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne Z18 brake caliper
- ✓ front axle
- ✓ 335x22 4E0615601L 240122-02141 Audi A8 brake disc
- ✓ 1-piston 4B0615424 Girling 41 / 43 brake caliper
- ✓ rear axle
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ 350x32 1644211412 Mercedes brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne Z18 brake caliper
- ✓ front axle
- ✓ Length: 50cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ Pulley
- ✓ Audi 80, 90, VW Passat B2 and many more
- ✓ AUDI 034105251A, 035105251C, VW 034105251A, 035105251C
- ✓ Desired color can be selected
- ✓ ZR18 / ZL18 Cayenne brake calipers
- ✓ 95535142153 / 955.351.421.53 95535142253 / 955.351.422.53 7L6615123Q / 7L6615149 / 7L6615123J / 7L6615123N
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
- ✓ 350x32
- ✓ 68mm centering
- ✓ 54.5mm height
- ✓ Thread M14x1.5
- ✓ ensures comfortable installation of your upgrade brake
- ✓ makes work easier
- ✓ rim assembly
- ✓ M14x1.5 on the wheel hub
- ✓ precise centering
- ✓ Desired color can be selected
- ✓ ZR18 / ZL18 Cayenne brake calipers
- ✓ 95535142153 / 955.351.421.53 95535142253 / 955.351.422.53 7L6615123Q / 7L6615149 / 7L6615123J / 7L6615123N
- ✓ Desired color can be selected
- ✓ ZR18 / ZL18 Cayenne brake calipers
- ✓ 95535142153 / 955.351.421.53 95535142253 / 955.351.422.53 7L6615123Q / 7L6615149 / 7L6615123J / 7L6615123N
