Audi 100 S4 C4 200 20v Turbo V8 A6 S6 4b VW Passat Rear Brake Caliper Adapter
- ✓ 335x22 4E0615601L 240122-02141 Audi A8 brake disc
- ✓ 1-piston 4B0615424 Girling 41 / 43 brake caliper
- ✓ rear axle
€115.11*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for original brake calipers in connection with the large 330 x22 brake disc from the S6 4f
suitable for all VW/Audi with rear axle brake discs in size 269x22 e.g.:
- Audi 100 S4 C4
- Audi 200 20V Turbo Quattro
- AUDI A6 TDI
- AUDI A6 4,2
- AUDI A6 Avant
- AUDI A6 Quattro
- AUDI S6 V8 Quattro
- AUDI S6 V8 Avant
- VW Passat W8 4-Motion
- VW Passat 2,8 4-Motion
- VW Passat 2,5 TDI 4-Motion
Can also be used in conjunction with all A6 4b and Passat models with small brake discs. There you have to get the ventilated brake calipers of the above models!
Required components:
- Brake calipers Girling 41/43 Teilenummer: 4B0615424
- Brake caliper brackets must also be from the calipers that were originally installed with the 269x22 disc
- Brake discs typ A6 4f 330x22 mm Nr.OE-VAG: 4F0 615 601 B
Advantages:
- Best possible delay values and performance! Also indispensable for performance increases
- Components come from series production by VW/Audi
- The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles
Scope of delivery:
- 2 high resistant adapter galvaniced (see photo)
- suitable screw set high-strength
- material certificate
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Technical data:
Login
30 December 2016 15:07
achterbahn301
Alles bestens gerne wieder!
27 July 2017 21:35
gialloevo2
Good fast delivery, very well packaged. Strongly recommend. thank you a**
16 April 2022 12:17
lgb-sammler-1984
Alles Super gelaufen!
11 March 2021 12:29
stefan4-244
Alles super! Gerne wieder.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 350x32 1644211412 Mercedes brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne Z18 brake caliper
- ✓ front axle
- ✓ 350x32 1644211412 Mercedes brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne Z18 brake caliper
- ✓ front axle
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ 330x22
- ✓ 68mm centering
- ✓ 42mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 330x22
- ✓ 68mm centering
- ✓ 42mm height
- ✓ Brake force regulator Infinitely variable
- ✓ Perfectly adjustable braking effect
- ✓ suitable for all vehicles
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ 330x22
- ✓ 68mm centering
- ✓ 42mm height
- ✓ 330x22
- ✓ 68mm centering
- ✓ 42mm height
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ 330x22
- ✓ 68mm centering
- ✓ 42mm height
- ✓ 350x32 1644211412 Mercedes brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne Z18 brake caliper
- ✓ front axle
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track