Audi 80 90 S2 brake caliper adapter Porsche 996 brake caliper Audi A8 brake disc 360x34 conversion brake system
- ✓ 360x34 4E0615301A 100330550 Audi A8 brake disc
- ✓ 4-piston 996351429 / 996351430 996Turbo/GT3 brake caliper
- ✓ front axle
€233.08*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter to mount the large Porsche 996 Turbo GT3 4-piston brake calipers in connection with the Audi A8 brake disc 360x34mm on the Audi S2 and Audi 80 / 90, with original 5x112 or 5x112 bolt circle conversions.
Components:
- Porsche caliper 996Turbo/GT3 parts NR: 996.351.429 and 430
- Audi A8 brake discs (4E0615301 A) 360x34mm Zimmermann part no. 100.3305.50
- Wheel hub from the Audi S2 with 5x112 must be installed (also available in our shop. Item number: 46859)
Advantages:
- Significantly better perfomance than the standard brake system.
- Adaptor does not require rectications on your vehicle,therefore easily transformable in its original condition
- Our brake adapters do not require the sending in of their serial parts, no re-welding - re-milling or re-drilling
- The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles
We also offer a suitable conversion for the rear axle, see our shop
Item is not in stock and will be produced for you after you place your order.
Scope of delivery:
- 2x brake caliper adapters for Audi 80, 90, S2, etc
- Set of high-strength screws
- materials certificate
- Copy of the vehicle registration document
- stress analysis
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
13 November 2017 11:05
ccc-motorsport_de
Alles bestens, gern wieder.
25 April 2024 17:29
Maximilian H
Alles super. Passt perfekt. Hohe Qualität.
28 November 2016 12:37
ccc-motorsport_de
Alles bestens, gern wieder.*** www.ccc-motorsport.de ***
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 360x34
- ✓ 68mm centering
- ✓ 59mm height
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ 360x34
- ✓ 68mm centering
- ✓ 59mm height
- ✓ 360x34
- ✓ 68mm centering
- ✓ 59mm height
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ Audi 80 S2
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track