Audi 80 90 S2 brake caliper adapter Audi A8 brake disc 323x30 RS3 brake calipers tuning adapter
- ✓ 323x30 240130-01831 Audi A8 brake disc
- ✓ 4-piston 8J0615107 / 8J0615108 Audi RS3 brake caliper
- ✓ front axle
€334.42*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter to mount the Audi RS3 brake calipers in conjunction with the 323x30 brake discs from the Audi A8, on the Audi S2 and Audi 80 / 90, with original 5x112 or 5x112 bolt circle conversions.
The standard Audi PCD can be maintained. Furthermore, 16 inch rims can be maintained with this brake system.
Required components:
- brake caliper: Audi RS3 , reference : left 8J0 615 107 + right 8J0 615 108
- brake disc: Audi A8 323x30 OE-reference 24.0130-0183.1
- Wheel hub from the Audi S2 with 5x112 must be installed (also available in our shop. Item number: 46859)
Advantages of this brake system:
- high deceleration, also in conjunction with our rear axle braking system
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
- quick and easy assembly
Our adapters are supplied galvanized, anti-corrosive according to DIN ISO 9227
Delivery:
- 2x brake caliper adapters (see picture)
- Stress analysis
- matching set of screws
- material certificate
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
13 March 2018 19:31
Andreas G
der Artikel ist sehr passgenau und super verarbeitet // besser geht's nicht
21 March 2023 20:08
Rudolf S
Beste Qualität. Super problemfrei beim eintragen lassen.
13 March 2018 19:33
Andreas G
super passgenau // besser geht's nicht
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 323x30
- ✓ 68mm centering
- ✓ 59mm height
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ 323x30
- ✓ 68mm centering
- ✓ 59mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 323x30
- ✓ 68mm centering
- ✓ 59mm height
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ Audi 80 S2
- ✓ Audi 80 B4
- ✓ 1.8T engine from the Audi A4 B5, Audi A6, VW Passat 3B
- ✓ Torque arm from ABK motor, viscous fan must be removed
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
