VW Golf MK5 MK6 Plus Audi A3 Jetta Seat Leon Altea TTRS RS3 Audi TT Brake Caliper Adapter 370x32
- ✓ 370x32 8J0615301F TTRS brake disc
- ✓ 4-piston 8J0615107 / 8J0615108 TTRS brake caliper
- ✓ front axle
€228.85*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter on Golf MK5 / MK6 models for conversion to TTRS brake caliper, combined with the original TTRS brake discs.
Suitable for the following vehicles:
-
VW Golf MK5 / MK6
-
Golf Plus
-
Jetta 4
- Touran
- Caddy 3
- Audi S1
-
Audi A3 (8P)
-
Seat Leon (1P1)
-
Seat Altea
-
Seat Altea XL
Advantages of this brake system:
- high deceleration, also in conjunction with our rear axle braking system
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Required components:
- original TTRS brake caliper, left reference: 8J0 615 107 / right reference 8J0 615 108
- brake pads: refence 8J0 698 151 E
- brake discs from TTRS 370x32 mm reference: 8J0615301F (RS3 discs do not fit, another depth)
Delivery:
- 2x brake caliper adapters
- high-strength mounting screws (10.9)
- material certificate
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
15 February 2020 11:08
Enes B
It IS very nice product!
29 February 2020 09:31
Enes B
5 stars because you are unique, I love it very much! The products are made with high quality and that's why I suggested the products to my friends! Thank you for your kindness and prompt response to your order! You're unique
2 March 2020 21:11
Enes B
Everithing is ok 👌 👌 👌
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: