Track plate under brake discs change total height Golf 4.5 and the Audi series with 5x100 or 5x112 5mm brake conversion
- ✓ Hole circle: 5x100 & 5x112
- ✓ Thickness: 5mm
- ✓ Centering 57.1->64.8
€121.75*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
2x track plates, which are mounted under the brake disc, made of high-strength aluminum.
These are used to install brake discs from the Mercedes series, which have too great an overall height and a smaller center centering and would therefore rub against the wheel carrier. Our plates bring the brake disk 5 mm closer to the rim.
The track plates are perfect for Golf 4,5 and the Audi series with 5x100 or 5x112 with 77mm brake disk centering on the wheel hub, in order to use brake disks with 5x100, 5x112 bolt circle and 65mm hub bore, which have a large overall height and could not be used otherwise.
The matching brake caliper adapters for this track plate can be found in the matching accessories for this adapter plate
Thanks to the TÜV certificate (technical report) included in the scope of delivery, registration can be carried out via individual approval.
Technical data:
- Thickness of the plate: 5mm
- Bolt circle: 5x100 and 5x112
- Brake disk centering vehicle: 77mm
- Rim centering vehicle: 57,1mm
- Centering for new brake disc 65mm
Delivery:
- 2x high-strength aluminum plates 5mm for the complete VW and Audi series with 68mm brake disc centering on the wheel hub
- TÜV - certificate for registration
- Material certificate
Technical data:
Login
21 May 2019 10:10
Alexander S
Top Produkt, top Verarbeitung. Und nun passt es auch mit der größere Bremsanlage. Danke kaufe immer wieder gerne bei euch ein
18 June 2019 12:25
psousa1980
The best!!!!!!
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- ✓ Hole circle: 5x100
- ✓ Thickness: 15mm
- ✓ Centering 57.1->67.8
- ✓ -3.0 degrees to +3 degrees camber
- ✓ 8mm thickness
- ✓ suitable for Golf 2 3 Syncro
- ✓ excellent fit
- ✓ front axle Golf 2 3 Corrado
- ✓ high stability
- ✓ Mounting behind the axle journal
- ✓ thickness: 5mm
- ✓ centering 65mm
- ✓ 3.0-3.0 degrees negative/positive rear camber correction
- ✓ Golf 2 3 Syncro
- ✓ camber and track