VW Golf Corrado Passat 2 3 G60 312x25 S3 Brake Brake Caliper Adapter 996 Porsche
- ✓ 312x25 8N0615301A Audi S3 / Golf 4 GTI brake disc
- ✓ 4-piston 996352422 / 996352421 Porsche 996 brake caliper
- ✓ front axle
€192.70*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Suitable for the following vehicles, for example:
- VW Golf MK2 and MK3
- VW Passat
- VW Corrado
- VW Jetta
- VW Polo
- Seat Toledo
Advantages of this brake system:
- high deceleration, also in conjunction with our rear axle braking system
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Required components:
- brake caliper: Porsche 996 (rear axle), reference 996.352.422 + 996.352.421 (only 100% suitable with the specified Porsche calipers)
- brake disc: Audi S3 (8L) /Golf MK4 GTI 312x25mm, reference 8N0 615 301 A
- The bolt circle must be re-drilled to 4x100 (with us in house feasible for 99€ for the pair of brake discs click here)
It can be used with from 16 inch
Delivery:
- 2x brake caliper adapters (see pictures)
- complete high-strength screw kit (10.9)
- material certificate
Tipps, Infos und Hinweise:
- Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
- Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
- Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.
>> Jetzt direkt zu Spurverbreiterungen nach Wunsch << - Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.
Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
10 March 2024 22:09
Maik A
Top Qualität, immer wieder gerne, schneller Versand
5 November 2020 12:01
Leonard P
Qualität 1a, bloß jetzt ist das Problem das mein Tüver die nicht eintragen will (Bremsen) hab sozusagen das Geld jetzt aus dem Fenster geschmissen
6 February 2023 07:58
Fabian H
Top Verarbeitung! Passgenauigkeit 100% Massive Qualität
9 May 2021 09:50
Rick B
Finish and product is excellent. Just make sure you get the right callipers. It must be from a later model Boxster, Cayman or 996 with late castings!! The part numbers are exactly the same, just make sure the are from a later model! Not from a pre 2000s Porsche. Google: 996 rear callipers no-fit and open the first link from Pelicanparts forum, it will become clear why you need to pay attention to this!! I had this problem and trimmed a little of the brakepad support pins with a grinder (Dremel or Proxxon will be fine). So, product is fine. No complaints about that. Just wouldve been a lot better if this information was available to me.
18 March 2021 08:02
Thomas B
Die Adapter passen ebenfalls gut aber ihr solltet die Artikelbeschreibung ändern oder ergänzen und zwar das die Adapter nicht beim Golf 3 mit plus Achse passen der Achsschenkel ist dort anderst .
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 312x25
- ✓ 65mm centering
- ✓ 35mm height
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 312x25
- ✓ 65mm centering
- ✓ 35mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 312x25
- ✓ 65mm centering
- ✓ 35mm height
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ excellent fit
- ✓ front axle Jetta 2 / Golf 2 / Corrado
- ✓ high stability
- ✓ 312x25
- ✓ 65mm centering
- ✓ 34.4mm height
- ✓ 5x100 bolt circle
- ✓ Plug & Play
- ✓ VW Golf 2 / Corrado / Seat Cordoba
- ✓ brake discs pitch circle diameter / bolt circle / drilling hub bore hole custome-made
- ✓ additional 2nd hole circle / pitch circle drilled in the brake disc
- ✓ turn hub diameter up
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
