Brake Conversionon the front -and rear axle of the Opel Corsa E OPC (yc.2017) to the 6 -piston Brembo GT6 Brake and the 4 -piston Brembo GT6 brake in combination with the Audi R8 hand brake caliper(139221)
The customer request / problem:
Pour customer Harun would like to install the following brake system with these components on the front- and rear axle of his Opel Corsa E OPC (yoc.2017):
Front axle:
- Brembo GT6 6-piston brake system
- 355x32mm friction ring
- Brembo GT6 4-piston brake system
- 330x28mm friction ring
- Audi R8 hand brake caliper(22.8274.03)
Our realisation / solution:
- Harun sent us the wheel bearing housings from the front and rear axle, including all the components of his desired brake system, by freight forwarder.
- So that Harun can drive the Brembo GT6 6-piston brake system in combination with the 355x32mm friction ring, we have to make him a customised brake disc pot and a suitable brake caliper tuning adapter
- In order to be able to install the Brembo GT6 4-piston brake calipers and the Audi R8 handbrake caliper (22.8274.03) in combination with the 330x28mm friction ring on the rear axle, we have to manufacture a brake caliper adapter with 4 mounts for the 2 brake calipers.
3D-Prototyping front axle
3D-Prototyping rear axle
Production
The customised brake disc pots and the tuning adapters have arrived back at our factory from the surface refiner and were test-fitted directly in our workshop.
Test installation of the Brembo GT6 6-piston brake system on the front axle of the Opel Corsa E OPC
The brake system and friction rings can be fitted directly to the front axle using the customised brake disc pots and tuning brake caliper adapters.
Test installation of the Brembo GT6 4-piston brake system in conjunction with the Audi R8 handbrake caliper on the rear axle of the Opel Corsa E OPC
The brake system and the friction rings can be fitted directly to the rear axle using the tuning brake caliper adapter.
As the original brake disc pot can be used on the rear axle for this project and the floaters and mounting material were no longer available, we had to make them for Harun so that he could install the brake system.
So if you have problems because the original mounting material is no longer available, you are welcome to contact us directly and we can offer you something suitable.
We can also help you with your customised solution
Here you can quickly and easily configure your customisation yourself
- ✓ brake caliper adapter custom-made manufacturing
- ✓ for front und rear axle
- ✓ information about the vehicle
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ centering ring, exclusive and individual custom-made
- ✓ rings made of high-strength steel
- ✓ to configure yourself
- ✓ with TÜV certificate
- ✓ best quality