Audi TT 8j Quattro Rear Axle Brake Caliper Adapter 356x22 mm A6 Brake Disc
- ✓ 356x22 4H0615601F Audi A6 brake disc
- ✓ X-piston original brake caliper
- ✓ rear axle
€262.99*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter on Audi TT 8j Quattro model, rear axle for conversion to 356x22 mm A6 brake discs, combined with the original brake calipers.
Suitable for following vehicles with original 310x22 brake discs
- Audi TT 8j Quattro
Advantages of this brake system:
- high deceleration
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling.
Required components:
- brake discs: 356x22 from Audi A6 , reference 4H0 615 601 F
- original brake calipers and pads from Audi TT 8j Quattro
- perforated Wave brake disc from Audi RS7 356x22 mm part number: 4G8.615.601
Info:
If you want to run a perforated brake disc, the Wave brake disc from the Audi RS7 with 356x22mm (part number: 4G8.615.601) will also fit, as the Audi S6 S7 S8 brake disc is not available perforated. The brake discs are otherwise exactly identical in dimensions.
Delivery:
- 2x brake caliper adapters for Audi TT 8j Quattro
- material certificate
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can not answer generally, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want.
Click here to go to the >> configure steel braided brake lines << - Always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
31 October 2020 06:34
Miroslav K
Very good product, perfect match and amazing quality!
27 March 2018 23:24
chris66schrauben
Top, schnelle Lieferung! Gerne wieder!
29 May 2019 09:58
Francesco M
Very good price and quality, better if comes with small manual, long time to have!!
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 390x36 1664210512 Mercedes GL 500 brake disc
- ✓ 6-piston 7PP615149J / 7PP615150J Porsche Cayenne 958 GTS brake caliper
- ✓ front axle
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ 356x22
- ✓ 68mm centering
- ✓ 36mm height
- ✓ for e.g. VW Golf 5, 6 Audi A3 Polo etc.
- ✓ Connection 1 M12x1 male thread bent
- ✓ Connection 2 M10x1 female thread straight
- ✓ Length 35cm long / Transparent sheathed
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ 356x22
- ✓ 68mm centering
- ✓ 36mm height
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 356x22
- ✓ 68mm centering
- ✓ 36mm height
- ✓ Brake force regulator Infinitely variable
- ✓ Perfectly adjustable braking effect
- ✓ suitable for all vehicles
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track