Which brake pads should be used?

The original brake pads from the brake caliper, which is required for our conversion kit, must always be used.

Can I use other brake calipers as indicated in the required components?

No, unfortunately that is not possible, the reason being that all brake calipers have different height and depth measurements. If another brake disc is installed, the brake caliper would either not fit the adapter at all or not run centrally to the brake disc. If you want to install a different brake caliper, we also have an option for you. You can have a custom-made product manufactured, check out the following link for more information:

Can I also use other discs as specified in the required components?

No, unfortunately that is not possible. The reason is simply that all brake calipers have different height and depth measurements. If a different brake disc is installed, the brake caliper would either not fit on the adapter at all or would not be centered with the brake disc. However, if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product produced, have a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

My brake caliper is not exactly centered over the brake disc - what should I do?

If your brake caliper is not exactly centered over the brake disc, in most cases it is not a problem. Depending on the vehicle, model year, and mileage, axle tolerances can occur – and this even in newer vehicles.The most important thing is:👉 The brake caliper must have sufficient clearance on the left and right to the brake disc so that nothing rubs or permanently touches it.Many brake calipers also have locking bolts. It may happen that:there is very little clearance on one side or the bolt lightly toucheswhile on the other side there is more playThis is generally not critical.🔧 This is how you proceed:Install brake pads:First check if the brake pads can be inserted cleanly and without resistance on both sides.If everything fits:If installation is possible without problems, you can simply gently push back the locking bolts – this usually resolves the issue.If it jams:If the brake pads cannot be installed, or only with difficulty, on one side, action is required.In this case, you can:slightly shim the adapter with suitable bushings to adjust the brake caliperor – depending on the situation – slightly mill the adapter so that the brake caliper is correctly centered again👉 The goal is always that the brake caliper is evenly aligned with the brake disc and the brake pads are seated freely and cleanly.

Audi S4 A4 B5 rear axle brake caliper adapter 330x22 brake disc Audi S4 B5 brake caliper tuning adapter

Name: Audi S4 A4 B5 rear axle brake caliper adapter 330x22 brake disc Audi S4 B5 brake caliper tuning adapter
Brand: EPYTEC
SKU: 1237
Price: 190.41 EUR
Availability: InStock
Rating: 5.0 (1 reviews)

€190.41*

Prices incl. VAT plus shipping costs

1 Review

Available

Product number: 1237

Delivery by Wednesday, 26.08.2026 if you order within the next 3 Hours.

Express shopping
Save your data and settings
Order overview and shipping information
Manage your newsletter subscription
19 Jahre Expertenwissen

Brake caliper adapter to convert the rear axle of all Audi S4 A4 B5 etc. to the 330x22mm brake disc from the Audi A6.

Adapters are suitable for the following VW and Seat models (all-wheel drive):

Audi A4 B5
Audi S4 B5

Advantages of this brake system:

Top deceleration values, no comparison to conventional rear brake discs
Perfect match for our brake calliper adapters for the front axle
A must for performance upgrades
Material certificate is included

Required components:

Brake caliper original Audi S4 B5 for 22mm brake discs, part number: 8D0 615 424 C, 8D0 615 423 C
Brake caliper bracket original Audi S4 B5 for 22mm brake discs, part number: 8D0 615 405 S
Rear brake disc 330x22 from Audi A6 part number: 562507JC

Scope of delivery:

2x brake calliper adapter for Audi S4 B5
High-strength fastening screw material
material certificate

We provide a TÜV certificate with this adapter. This means that the TÜV inspector can easily register the adapter.

Tips, information and advice:

To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Brake caliper hole spacing: 90

Hole spacing steering knuckle: 90

Manufacturer: Epytec

Mounting location: rear!

1 of 1 reviews

Leave a review!

Share your experiences with other customers.

Login

email address

password

or Register with...

Sort by

17 August 2024 08:50

Stanislaw M

Super Teil Top Qualität

Motor	Motorcode
1.8 T quattro	8D2\|150PS(110KW)
1.9 TDI quattro	B5\|116PS(85KW)
1.9 TDI quattro	8D2\|110PS(81KW)
2.8 quattro	B5\|193PS(142KW)
1.8 quattro	8D2\|125PS(92KW)
1.8 T quattro	B5\|150PS(110KW)
1.9 TDI quattro	B5\|110PS(81KW)
2.4 quattro	8D2\|165PS(121KW)
2.5 TDI quattro	B5\|150PS(110KW)
S4 quattro	B5\|265PS(195KW)
1.8 quattro	B5\|125PS(92KW)
2.5 TDI quattro	8D2\|150PS(110KW)
2.4 quattro	8D2\|163PS(120KW)
2.8 quattro	8D2\|174PS(128KW)
1.8 T quattro	B5\|180PS(132KW)
2.6 quattro	8D2\|150PS(110KW)
1.8 T quattro	8D2\|180PS(132KW)
2.6 quattro	B5\|150PS(110KW)
1.9 TDI quattro	8D2\|116PS(85KW)
S4 quattro	8D2\|265PS(195KW)
2.8 quattro	8D2\|193PS(142KW)
2.4 quattro	B5\|163PS(120KW)
2.8 quattro	B5\|174PS(128KW)
2.4 quattro	B5\|165PS(121KW)

Motor	Motorcode
1.8 T quattro	8D2\|150PS(110KW)
1.9 TDI quattro	B5\|116PS(85KW)
1.9 TDI quattro	8D2\|110PS(81KW)
2.8 quattro	B5\|193PS(142KW)
1.8 quattro	8D2\|125PS(92KW)
1.8 T quattro	B5\|150PS(110KW)
1.9 TDI quattro	B5\|110PS(81KW)
2.4 quattro	8D2\|165PS(121KW)
2.5 TDI quattro	B5\|150PS(110KW)
S4 quattro	B5\|265PS(195KW)
1.8 quattro	B5\|125PS(92KW)
2.5 TDI quattro	8D2\|150PS(110KW)
2.4 quattro	8D2\|163PS(120KW)
2.8 quattro	8D2\|174PS(128KW)
1.8 T quattro	B5\|180PS(132KW)
2.6 quattro	8D2\|150PS(110KW)
1.8 T quattro	8D2\|180PS(132KW)
2.6 quattro	B5\|150PS(110KW)
1.9 TDI quattro	8D2\|116PS(85KW)
S4 quattro	8D2\|265PS(195KW)
2.8 quattro	8D2\|193PS(142KW)
2.4 quattro	B5\|163PS(120KW)
2.8 quattro	B5\|174PS(128KW)
2.4 quattro	B5\|165PS(121KW)

Audi A4 B5 / A6 VW Passat 3BG 3B Brake Caliper Adapter Porsche Cayenne Brake ZR18 Conservion Brake Disc Tuning Adapter

✓ 350x32 A1764210212 Mercedes CLA 43 AMG brake disc
✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne / VW Tuareg brake caliper
✓ front axle

€156.43*

€145.48

Product number: 273

Big Brake system KIT VW Passat Audi A4 S4 B5 Audi A6 Skoda 360x36mm brake disk Mercedes Porsche Panamera 6-piston brake caliper

€1,563.88*

€1,454.41

Product number: 1234-KIT