VR6 Manifold heat shield Turbo
- ✓ Stainless steel
- ✓ VR6 Turbo
- ✓ Maximum heat dissipation
£40.46*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Stainless steel heat shield sheet for all VW VR6 Turbo engines. Fits directly onto the VR6 Turbo manifold.
With our head shield you can greatly reduce the heat in the engine compartment, this helps to keep the air intake much cooler - therefore greatly increasing the power of your vehicle.
The sheet is screwed directly onto the manifold.
Scope of delivery:
- 1x stainless steel heat shield converter for VR6 Turbo manifolds.
Technical data:
Login
20 October 2020 22:22
dominik.sandt0231
Super Service kann man nur empfehlen immer wieder gern
1 September 2018 21:46
sporttobinator
Alles Super gerne wieder 5 sterne von 5
15 February 2019 19:16
florianfi83
Schnelle Lieferung, alles super!!
23 April 2018 20:39
wob-vw0114
Alles bestens gerne wieder
26 January 2021 20:19
tahsin.123
Alles top gelaufen
3 January 2020 01:05
turbolent79
Bin sehr zufrieden! Hat alles super geklappt. :)
20 October 2022 13:05
kfz_schmidt.eu
Alles bestens. Vielen Dank für Ihre Bemühungen, den Kauf reibungslos abzuwickeln.
28 January 2019 08:42
thomasg3472
Alles gut!!!!!!
19 January 2018 12:06
davidlavidaloca
Super geil
14 May 2020 11:49
speedaudi1.8t
Alles super, alles bestens, gerne wieder !!!
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 35I|174PS(128KW) |
| 2.9 VR6 Syncro | 3A5|184PS(135KW) |
| 2.8 VR6 | 3A5|174PS(128KW) |
| 2.9 VR6 Syncro | 35I|184PS(135KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 Syncro | 7M8|174PS(128KW) |
| 2.8 VR6 | 7M9|174PS(128KW) |
| 2.8 VR6 | 7M6|174PS(128KW) |
| 2.8 VR6 Syncro | 7M9|174PS(128KW) |
| 2.8 VR6 Syncro | 7M6|174PS(128KW) |
| 2.8 VR6 | 7M8|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H1|174PS(128KW) |
| 2.9 VR6 Syncro | 1H1|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 3A2|174PS(128KW) |
| 2.8 VR6 | 35I|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 Syncro | 1H5|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 | 53I|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H2|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 35I|174PS(128KW) |
| 2.9 VR6 Syncro | 3A5|184PS(135KW) |
| 2.8 VR6 | 3A5|174PS(128KW) |
| 2.9 VR6 Syncro | 35I|184PS(135KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 Syncro | 7M8|174PS(128KW) |
| 2.8 VR6 | 7M9|174PS(128KW) |
| 2.8 VR6 | 7M6|174PS(128KW) |
| 2.8 VR6 Syncro | 7M9|174PS(128KW) |
| 2.8 VR6 Syncro | 7M6|174PS(128KW) |
| 2.8 VR6 | 7M8|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H1|174PS(128KW) |
| 2.9 VR6 Syncro | 1H1|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 3A2|174PS(128KW) |
| 2.8 VR6 | 35I|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 Syncro | 1H5|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 | 53I|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H2|174PS(128KW) |
- ✓ gearbox holder
- ✓ Golf 2, Golf 3, Passat, Corrado, Jetta, Vento
- ✓ 02m / R32 V6 1.8T 6-speed gearbox DRP DQB DXW
- ✓ 020 Gearbox
- ✓ 4&5Gang
- ✓ OE:VAG WZ 3104
- ✓ No more play
- ✓ high-quality aluminum
- ✓ Golf VR6 cable shifters
- ✓ No more play
- ✓ High quality brass
- ✓ For all 02m 02q 02a and 02j gearboxes
- ✓ VR6 plus axle
- ✓ VW Golf 2, VW Golf 3, Passat, Corrado
- ✓ 02M, 02Q, DQ250 / DSG four-wheel drive transmission
- ✓ VR6 plus axle
- ✓ VW Golf 3 VR6, Golf 3 GTI, Passat VR6, Corrado VR6
- ✓ 02M, 02Q, DQ250 / DSG 6 speed gearbox
- ✓ Hydraulic line
- ✓ Golf 1, 2, 3, Corrado, Vento, Scirocco, Caddy
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ Hydraulic clutch slave cylinder
- ✓ Golf 1, 2, 3, Audi A3, Seat Leon
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints G60 or VR6 fine toothing
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ For Golf 2 Corrado
- ✓ On Golf 4 Accelerator Pedal
- ✓ OE:6Q1723503K
- ✓ G60 GTI 16V engines
- ✓ 228 clutch
- ✓ lightens 4.1 kg
- ✓ Release lever reinforced
- ✓ G60, VR6, 2L 16V, GTI, TDI, Corrado, Golf 2/ 3, Passat
- ✓ 02A/02J gearbox
- ✓ Complete KIT
- ✓ length 1.34m
- ✓ OE NR: C357721335E
- ✓ 4x100 to 5x112
- ✓ 20mm per side
- ✓ 57.1 -> 57.1 centering
- ✓ VW Golf 2, Golf 3 Passat, Corrado, Jetta, Vento
- ✓ 02a 02j 5 gear
- ✓ 1.8T 16V G60 conversion
- ✓ 312x25 1J0615301AA 1J0615302A S3 / R32 brake disc
- ✓ 1-piston 1J0615123E / 1J0615124E S3 / R32 brake caliper
- ✓ front axle
- ✓ Suitable for our master brake cylinders
- ✓ plug and play
- ✓ quickly installed
- ✓ Passat 35I Golf 2 GTI G60
- ✓ OE NR: 357 721 401
- ✓ Golf1 Caddy conversion