BMW E36 Z3 Performance Brake Caliper Adapter Front
- ✓ 345x28 34112282445 BMW E46 M3 CSL brake disc
- ✓ 6-piston 34116786741 / 34116786742 BMW 135i brake caliper
- ✓ front axle
€208.06*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for the front axle of BMW E36/Z3 to install the BMW Performance 6 piston brake caliper, combined with the 345x28mm E46 M3 brake discs.
The BMW Performance 6 piston calipers are easily installed on the original axle support in place of the original calipers .
Advantages of this brake system:
- top deceleration, without comparaison with conventional brake discs
- easy assembly
- better performance
- supplied material certificate
- can easily be restored to the original state
Required components:
- BMW Performance 6 piston brake caliper from 135i reference left 34116786741 + right 34116786742
- Brake pads from the BMW 135i part no. 34 11 6 786 044
- brake disc from the BMW E46 M3 CSL front axle 345x28mm
Delivery:
- 2x brake caliper adapters for BMW E36
- high strength montage screws
- material certificate
- stress analysis for registration
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
14 February 2022 13:24
Christian F
Verarbeitung und Qualität sind alles 1 Klasse! Der Service dem man beim Kauf mit bekommt ist genauso gut. Ich würde die Firma immer wieder empfehlen.
14 January 2020 11:11
Christof H
Bin Sehr zufrieden mit dem Produkt. Super Passgenau und natürlich auch Qualität. Sehr schnell bearbeitet und der Versand hat auch gepasst. Auch bei Fragen sehr schnell geantwortet. Ich werde eich auf alle Fälle weiterempfehlen.
14 February 2022 09:22
Christian F
Verarbeitung und Qualität sind alles 1 Klasse! Der Service dem man beim Kauf mit bekommt ist genauso gut. Ich würde die Firma immer wieder empfehlen.
15 April 2023 12:34
Ougour S
Bin zufrieden durch die adapter hatte ich keine probleme bei der eintragung 👍🏼
15 July 2023 19:20
Christian K
Hohe Qualität Saubere Verarbeitung Guter Online-Shop und Beratung Gerne wieder!:)
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 320x22 34201166073 BMW E46 brake disc
- ✓ 1-piston 34216750161 / 34216750162 BMW E46 brake caliper
- ✓ rear axle
- ✓ drift spacer / steering lock spacer in oder to increase steering angle on models BMW E30 E36 E46 Z1 Z3
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ 345x28
- ✓ 79mm centering
- ✓ 52mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
