BMW performance brake caliper adapter E46 Z4 E85 front axle
- ✓ 345x28 34112282445 BMW E46 M3 CSL brake disc
- ✓ 6-piston 34116786741 135i
- ✓ front axle
€177.96*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for the front axle of BMW E46 and Z4 E85 to install the BMW Performance 6 piston brake caliper, combined with the 345x28mm E46 M3 CSL brake discs.
Thanks to our adapters, the BMW Performance 6 piston calipers are easily installed on the original axle support in place of the original calipers.
Advantages of this brake system:
- top deceleration, without comparison with conventional brake discs
- easy assembly
- better performance
- supplied material certificate
- can easily be restored to the original state
Required components:
- Performance 6 piston brake caliper from 135i reference: 34 11 6 786 741
- Brake pads from the BMW 135i Part No. 34 11 6 786 044
- brake disc from BMW E46 M3 CSL front axle 345x28mm part number: 3411 2 282 445
Delivery:
- 2x brake caliper adapters for BMW E46 and Z4 E85
- matching set of screws
- material certificate
- stress analysis for better registration
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
10 June 2020 06:19
Alexander M
Sehr gutes Produkt, Top Verarbeitung, schnelle Abwicklung, Passgenauigkeit 100%, problemlose Eintragung.
19 March 2021 05:58
Stefan M
Präzise und beste Materialgüte. Passgenau. Gruß Stefan Michler
27 September 2020 16:48
Herbert L
super Artikel und Passgenauigkeit kann ich nur jedem empfehlen Teile passen zu 100%
19 March 2021 18:25
Stefan M
Passgenau und beste Materialgüte. Gruß Stefan Michler
6 September 2018 03:10
Robert B
Abwicklung war hervorragend. Verwendung ist optimal, schade dass die Farbe silber verzinkt ist und nicht schwarz wie auf den Bildern zu sehen. Sonst tolles Produkt. Vielen Dank
9 March 2021 19:50
Pascal E
Passt perfekt!
9 April 2024 18:15
Marion S
Ware rasch erhalten und einfach montiert. Passgenau. Super!
29 September 2018 14:34
Ferdinand B
Ihr macht einen super Job, liefert perfekt gefärtigte Teile in Passform und ausführung. Ja ich empfehle euch sicherlich weiter
14 March 2021 08:24
Stefan M
Passgenau und beste Materialgüte. Viele Grüße Stefan Michler
17 February 2019 12:02
Jody L
Staffe di ottima qualità! Utili per chi ha delle pinze bmw performance ma non ha le staffe di fissaggio Il personale è molto disponibile!!!
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Length: 57cm
- ✓ M10x1 straight outside
- ✓ M10x1 straight inside
- ✓ 345x28
- ✓ 79mm centering
- ✓ 52mm height
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 5x100 to 5x112 / 5x120 / 5x130
- ✓ 25mm per side
- ✓ 57.1 ->57.1 centering
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ height-adjustable coilover shock absorber kit for the 3-series BMW E46
- ✓ BMW E46
- ✓ long service life
- ✓ 4 pieces
- ✓ BMW E46
- ✓ long service life
- ✓ 4 pieces
- ✓ Front axle
- ✓ suitable for BMW E36, E46
- ✓ camber correction +/-0.5 degrees
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track