BMW E36 M3 Brake Caliper Adapter Rear Axle Porsche Rear Brake 328x20
- ✓ 328x20 150342270 BMW E46 M3 brake disc
- ✓ 4-piston 986352422 / 986352421 Porsche 986 brake caliper
- ✓ rear axle
£194.02*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapters for the rear axle of BMW E36 M3 to install the rear brake caliper of Porsche 986, combined with the 328x20mm E46 M3 brake discs.
Thanks to our adapter, the Porsche brake caliper is simply screwed to the original axle instead of the original caliper.
Advantages of this brake system:
- top deceleration, without comparison with conventional brake discs
- easy assembly
- better performance
- supplied material certificate
- can easily be restored to the original state
Required components:
- brake caliper: Porsche 986 rear, reference : 986.352.422 + 986.352.421
- brake disc: BMW E46 M3 rear 328x20mm
Delivery:
- 2x brake caliper adapters for BMW E36 M3
- high strength mounting screws
- material certificate
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
11 June 2018 21:48
Alexander B
Das Produkt passt sehr gut und lässt sich einfach montieren. Jedoch war ich mit dem Ablauf der Bestellung und dem Service nicht zufrieden.
12 November 2017 18:19
kawazaki86
Envoie rapide bonne qualité
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
| Motor | Motorcode |
|---|---|
| M3 3.2 | E36|321PS(236KW) |
| M3 3.0 | E36|286PS(210KW) |
| Motor | Motorcode |
|---|---|
| M3 3.2 | E36|321PS(236KW) |
| Motor | Motorcode |
|---|---|
| M3 3.2 | E36|321PS(236KW) |
| M3 3.0 | E36|286PS(210KW) |
| Motor | Motorcode |
|---|---|
| M3 3.2 | E36|321PS(236KW) |
- ✓ 345x28 150342270 BMW E46 M3 CSL brake discs
- ✓ 4-piston 996351425 / 996351426 Porsche Boxter S brake caliper
- ✓ front axle
- ✓ 345x28 34112282445 BMW E46 M3 CSL brake disc
- ✓ 6-piston 34116786741 / 34116786742 BMW Performance brake caliper
- ✓ front axle
- ✓ clutch pin, clutch locking bolt
- ✓ BMW E30 E46 E81 E88 and much more
- ✓ high durability
- ✓ Two-piece design
- ✓ different thicknesses
- ✓ many diameters
- ✓ excellent fit
- ✓ front right / rear left BMW E36 / Z3
- ✓ high stability
- ✓ BMW E36, E46
- ✓ 325i,320i,316
- ✓ simple turbo conversion
- ✓ excellent fit
- ✓ front right / rear left BMW E36 / Z3
- ✓ high stability
- ✓ excellent fit
- ✓ rear axle BMW E36
- ✓ high stability
- ✓ S50 & S52 engines
- ✓ lightens 5.6 kg
- ✓ lower fuel consumption
- ✓ excellent fit
- ✓ rear axle BMW E36
- ✓ high stability
- ✓ Rear axle adjustment suitable for BMW E36 E46 and Z4
- ✓ 345x28 150342270 BMW E46 M3 CSL brake discs
- ✓ 4-piston 996351425 / 996351426 Porsche Boxter S brake caliper
- ✓ front axle
- ✓ BMW, E36, Z3, M3, E36 8 MZ3, E36/8 Z3
- ✓ E46 M3 6-speed transmission from the BMW E46 M3
- ✓ simple transmission conversion
- ✓ Length: 60cm
- ✓ M10x1 outside 45° curved
- ✓ M10x1 inside straight
