Wheel Spacer PCD Adapter Plate VW Golf 4x100 5x130 to Porsche 20mm Track Adapter
- ✓ 4x100 to 5x130
- ✓ 20mm per side
- ✓ 57.1 ->71.6 centering
€136.56*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
High-strength wheel spacer / PCD Adapter suitable for all VW with PCD 4x100 and hub centric 57,10mm.
Thanks to this adapter, all Porsche rims, which are compatible with a 5x130mm PCD, can be mounted.
- enlargement per wheel: 20mm
- enlargement per axle: 40mm
- internal hubcentric: 57,10mm
- external hubcentric Porsche: 71,60mm
- screw thread on adapter: M14 x 1,5
All components are made of high quality aluminum. All screws provided are high-strength (10.9).
In the installation instructions, you see how the whole thing is mounted. (click here)
Due to the TÜV certificate (technical report) included in the scope of delivery, a registration can be carried out by individual acceptance.
Delivery:
- 2x adapters / spacers for one axle
- complete mounting screws set (10.9)
- TÜV - certificate for registration
- Installation instructions
This offer is only for one axle. For complete equipment of your vehicle, order, please, 2 times. The item is also available with the thickness of your choice. You can thus compose the kit to the required thickness.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
1 July 2018 21:26
vwschorsch
Super , gerne wieder
31 March 2019 18:04
allan-denmark
Alles bestens und immer wieder ;-) danke
27 July 2022 13:16
tilma.nemet
Tip top sofort wieder!!! Ruckzuck Versand!!!!!netter Kontakt!!!!!
10 March 2022 07:18
Maximilian R
Ich bin mehr als positiv überrascht wie gut die Qualität ist Sie sind perfekt verarbeitet und passen aufs Müh genau Kann sie nur jedem empfehlen der auf der Suche nach solchen Adapternplatten ist
7 August 2019 12:51
patrickw9032
Alles Super!!!
7 September 2024 06:56
Benjamin B
Bin mit dem Produkt sehr zufrieden!!!! Ordentlich verarbeitet. Gerne wieder
13 May 2019 14:00
kerstin210561
Super gelaufen, gerne wieder
23 March 2023 12:51
Alexander S
Dieses Produkt hat zur Überraschung meinerseits und seitens epytec nicht gepasst. Mir wurde sofort angeboten es zurückzusenden und die jeweiligen Äderungen von epytec durchführen zu lassen, damit es passt.
19 July 2018 09:49
up_geflacht
alles super,gerne wieder
- How often do I have to pay the express surcharge if I have several products in one order or place several orders?
You only have to pay the express surcharge once per order. However, if you complete the order and place a new order, an express surcharge will apply again. The express surcharge therefore applies per order, not per product.
- With which torque are our Epytec bolt circle adapters screwed tight?
To attach the bolt circle adapters to the wheel hub, the same torque is used as original, this is usually between 120 and 140NM.
If you are not sure, it must be asked at the vehicle manufacturer.
The rim is always attached to the bolt circle adapter with the torque that the rim manufacturer specifies. There is a data sheet for each rim, which specifies the tightening torque.
If the data sheet is no longer available, the values must be requested from the rim manufacturer.
- ✓ Quick assembly
- ✓ delivered ready to install
- ✓ great safety
- ✓ to configure yourself
- ✓ with TÜV certificate
- ✓ best quality
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints VR6 or G60 coarse teeth
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints VR6 or G60
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints G60 or VR6 fine toothing