VW T3 Transporter Brake Caliper Adapter before Year of Manufacture 1986 Audi Ate 57 Brake Caliper 312x25 Front Axle
- ✓ 312x25 4B0615301A Audi A4 quattro / Audi A6 brake disc
- ✓ 1-piston C4 Girling/ ATE 57 4A0615123A / 4A0615124A Audi 100 / A6 brake caliper
- ✓ front axle
€145.54*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, front axle, on model T3 transporter for conversion to internally vented 312x25mm brake discs, combined with the Audi A6 calipers.
Suitable for VW T3 transporter, manufactured before 1986 with M12 screw mount on the axle
Advantages:
- top deceleration
- the system no longer warms up and no more fading
- very cheap components. You can find second-hand caliper from 49.- € / new from 70.-€
- thanks to the material certificate supplied with the order, it is possible to register your purchase
- quick and easy assembly with the supplied mounting screws
Required components:
- brake disc: Audi A4 quattro, Audi A6 312x25mm, reference e.g 4B0 615 301 A
- Brake caliper: Audi 100/A6 C4 Girling/ ATE 57, reference 4A0615123A + 4A0615124A (left,right)
- brake caliper mounting brackets that were installed with the 288 brake system (required because of the shorter design of the bracket)
- wheel hubs to center the brake disc are also available in our shop.
- since the screwing surface for the adapter is not level, it must be planned before installing the adapter so that the adapter fits properly.
At least 16 inch rims should be used so that the diameter of the brake disc fits underneath
Hint:
This adapter is for all T3 bus before Bj 86 is yours after Bj 86 you need the >> adapter with the article no: 346 <<
Delivery:
- 2x brake caliper adapters for VW T3 transporter, manufactured before 1986 with M12 screw mount on the axle<
- matching centering rings
- set of high-strength screws
Tipps, Infos und Hinweise:
- Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
- Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
- Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.
>> Jetzt direkt zu Spurverbreiterungen nach Wunsch << - Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.
Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
20 August 2021 14:14
Markus K
Alles super gelaufen, Beratung sehr nett und kompetent, schneller Versand. Gerne wieder
21 December 2023 19:45
Sven B
Hervorragende Qualität und top Service! Nur zu empfehlen 👍👍
27 March 2021 06:02
Kai S
Gute Ware
27 March 2021 22:31
Kai S
Gute Ware
25 April 2024 07:08
Gintautas P
Fits good
27 December 2021 15:14
Till S
Adapter passt perfekt, alles dabei was man braucht, jedoch müssen die Achsschenkel (bis Bj 86) bearbeitet werden damit alles gut sitzt (Planflächen fräsen)
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 312x25
- ✓ 68mm centering
- ✓ 47mm height
- ✓ 3A0615125 / 3B0615125 / 4A0615125A / 4B0615125
- ✓ Golf 4 GTI / Audi A3 / Audi TT
- ✓ Front axle
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ VW T3 BUS
- ✓ Left brake caliper suitable for many Audi A4, VW Passat
- ✓ front axle
- ✓ OE quality
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ Right brake caliper suitable for many Audi A4, VW Passat
- ✓ front axle
- ✓ OE quality
- ✓ 312x25
- ✓ 68mm centering
- ✓ 47mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
