VW Bus T2 T3 1,9 l TDI Engine Mounting Bracket Holder Engine Conversion 1Z Doka Pritsche Syncro 2WD
- ✓ VW T2/T3 Bus
- ✓ 1.9l TDI (90PS) 1Z engines
- ✓ simple engine conversion
€229.78*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Engine mounting bracket / support / holder for the conversion of all models VW T2/ T3 bus (also Syncro) to 1,9l TDI (90PS) 1Z engine.
Our engine bracket / holder is designed so that it can be combined with the original engine bracket of the TD. No other support is required! The exhaust pipe bracket can be removed, or, depending on your choice, offset to the side, because adjustments are necessary when mounting the exhaust pipe bracket according to the geometrical specifications of the body.
As shown in the picture, the engine bracket / holder is delivered galvanized, therefore protected against corrosion, and has a very good optics.
Delivery:
- 1X engine mounting bracket / holder for VW T2, T3 bus in order to convert to 1,9l TDI (90PS) engine, with engine classification code 1Z, including exhaust bracket for screwing on.
- material certificate
PS: For the 1.9l TDI AAZ engine we also have suitable brackets article 1209, as well as for the conversion to 1.9l TDI AFN engine, article 909
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Login
15 February 2019 17:29
Dietger R
Danke wie immer gute Qualität, gerne wieder.
18 April 2020 13:40
Christian H
Sehr gute Qualität
17 April 2021 11:54
Sylvain D
top quality!!! thank you!!!
25 April 2022 19:44
Jean-Charles B
Sehr gutes produkt von guter herstellung und qualitat, angemessrner preis Entshuldigung fur mein deutsch Deutsch herzlich JC
12 July 2020 05:56
Frederic D
le support s'adapte parfaitement. Attention, c'est lourd! Qualité Allemande....
13 July 2020 07:36
Frederic D
très bon produit de qualité
4 June 2019 16:06
Anatol K
Sehr gute Qualität.
25 April 2020 08:57
Rainer P
praktisch ,hilfreich , sauber gut
23 March 2023 06:08
Benjamin H
Super Qualität und passgenau, Preis/Leistung top, nur zu empfehlen
29 April 2021 21:54
Sylvain D
The best product in the world!!!!
- Does the Epytec engine mounting support fit even if a large turbo is installed later?
Yes, but the support may need to be adjusted depending on the size of the turbo
- Is the Epytec engine support also compatible with the AFN motor?
No, the Epytec engine support is not suitable because the turbo attached to the AFN is in the way.
- Do I need a different oil pan and oil pump for this rebuild?
With this conversion, the original T3 oil pan can still be used. A suitable oil pump is unfortunately not available for the conversion, so this must be converted itself.